Leaderboard

weather boards and the butinol done on the veranda. 2017-08-20_05-37-46 by sheepers, on Flickr 2017-08-20_05-37-37 by sheepers, on Flickr 2017-08-20_05-37-29 by sheepers, on Flickr wires and shit. 2017-08-20_05-37-20 by sheepers, on Flickr2017-08-20_05-37-29 by sheepers, on Flickr rondo for attaching the ceiling 2017-08-20_05-37-11 by sheepers, on Flickr steps for getting up to the roof storage 2017-08-20_05-37-01 by sheepers, on Flickr

I've been collecting timber from a sawmill 'up north'. Is my ute OS? I reckon it are. It's also bloody awesome. It has self canceling indicators and power steering, but everything else you need to do yourself. The objects in the mirror are precisely their own size and I need to get out of the cab to engage the free-wheeling hubs. I love that ute. Sadly the generator died last weekend (as did a number of other things). It's a real challenge trying to keep tools dry enough to use up there, but after forking out a significant portion of the cabin budget on a replacement generator I managed to finish another frame today. I've gotten a bit better at calculating tangents... but of course there are mistakes aplenty. Sorry about blurry photo. It was almost dark

we had a roof shout and it was fucking great. approx 11 thousand people turned up and had great times. this is the last people standing. 2017-08-20_12-29-17 by sheepers, on Flickr

Paint it pink, call it wet on the inside

Cytherea. Don't google that with your mum around though

Currently taking submissions on boat names. Trying this one on today

Went for a hoon over the hills and took in a few country pubs with some other 1200s and a 260, car went well and no issues. Today I butchered a couple of old standard A12 downpipes I no longer need and made a flange so this will make life a lot easier in the future! Not to mention tidier looking. There's a pie cut left open cause I don't know what angle it needs to be yet

Finished the stand Some noise makers turned up

Top coat on, terrible phone pics but you can get the idea... Sat the engine in And all the bits have come back from the platers. Thanks to Phill at Electroless Coating Systems Next up is getting the front wheel sorted, Seat covered and the cream insert painted onto the tank. Then the fun part, bolting it all back together!!

This is Next SUNDAY. SEVEN DAYS. so youve still got heaps of time to test ride your bike, then bodge whatever breaks. or just ignore it and hope it starts on the day

ready For Hanmer

Used a bunch of wax and grease remover and a lot of rags and a little wire toothbrush and cleaned the underseal off around where I need to weld the firewall in. I thought I might make a little patch for the floor to make me feel like I'd made some progress. But then I realised that I still needed to remove the underseal from the underside of the floor where I need to weld the patch in.

engine mounts welded and fitted to spare block silly non used egr plate trimmed back for critical room around the rear of rh head /firewall interference area before pic After trimming

Holy crap they all turned out the same

Well it's been a while but I'm finally getting back into it now the weekend's come back. I made a start by cutting out the part of the inner guard that needs replacing. It took a bit of cutting and spot weld drilling but it came away easily enough. Before: And after: You can see a really dodgy "repair" that's been welded over the outside of the rail, probably something to do with the collision that caused all the buckling in the inner wing sometime in the past. I doubt it would have stood up to any sort of cert and it looks hideous so I'm going to cut it from just behind it and get rid of the whole lot. The replacement panel is all made up months ago before I realised how much of a mission the whole job was going to be. Everything you see here is going to be replaced. Before I can do that though, I have to cut out the bad stuff. I started by cutting the whole lot off just where I said. Now to stop all the stresses building up in the same place I'm not going to join both the inner and outer skins at the same point. So I'm going to carefully peel the outer skin back without damaging the inner skin and join the two in two different steps. So, here's the peeled rail. Came away pretty simply. This is the new outer rail mocked up to see how it will fit. Snaps on nicely so I must have made it pretty damn close to the right size. It's way too long currently but it'll be trimmed down to size later on. I learned a couple of things from cutting off the end of the rail. It's a little more complicated than a straight rail on the internal skin. There's a pressed kink, obviously some sort of rudimentary crumple zone. It sort of looks like a shadow in this photo but it goes between the two cut away parts. Now as much as the thought of a pristine front end and a steering column through my face in the event of a crash is appealing, I'd rather not screw up my pretty teeth. Therefore, I'm going to reproduce these features in my rails. I'll have to figure out a set of dies to press them in. On the Mazda motor front, I've got the car turning up on a truck either Tuesday or Wednesday so the next exciting chapter in that saga will begin soon. Until then, more cutting and head scratching today.

Hmm i only sat it on this so i didnt have to carry it..... this is how the other one came to be.

Both vehicles are legal as now Hanmeet is going to rule.

So, I thought i started a thread for this car but i cant find it anywhere - or even the other photos i had of it. I inherited this from my Grandad a few years back. He used to pick us up from school in it and when i went around and mowed the lawns (i was about 8-9 years old) id always drive it around the 1/4 acre section. Did my first "skids" on the lawn in this, much to Nana's disgust. "Janee" was grandads nickname so ive named it that. I was up in Hawkes Bay this last week and took a few pics of it again. From what i can gather and have been told its a '63 Mk1 Cortina Consul that was column shift until grandad (in his late 80's) couldn't shift it properly. Dad converted it to floor shift with an extra long gear stick which apparently helped. Dad says it has an Escort engine in it but there is a couple of "kent" blocks at the grandparents place in the shed. Its had more parking hits than tina turner due to grandad touch parking everywhere from getting it in and out of the shed to parking at the RSA. We've removed the front bench seat as it wasnt original and was poorly mounted - so will be on the hunt for a couple of bucket seats. Amazingly (bad news in a way) was that he and dad wrecked out a 4 door GT as parts for this (FFS guys you got it round the wrong way) but i have a bucket load of spare doors and bumpers etc which will come in handy. Plan is to load her up fully with all the spares and get it to CHCH, hopefully using a couple of relo jobs through work to move the trailer up there and back. Ill get it running, Rego and Wof and drive it. I want to leave the patina on it for now as thats how i remember it. Will get some decent non shed pics of it asap.

Hi team. After a bit of attention in the whipping a v4 thread i figure there is some love for a dirty old transhit so here we are First impression Discussion:

Picked up cool Adriano thermo switches for the fans. Means I can stage the fans at any temp. pulled the standard rad out of my old AW11 and tidied it up. Fans are pretty bad in spots so I'll see if I can get replacements or something to press in???? going for wof next week if I pull my finger out and drop it off stands. plans for respray next!!

There's really no need to remove a cat anyway, they're no more restrictive than a muffler. The engine is tuned to utilise the cat for emissions purposes, which does sacrifice some performance and economy, but since ditching the cat has no affect on the engines tune there's not really anything to gain. Unless it's blocked, but that's highlighting another issue with your engine.

spray bottle of soapy water, gentle does it, it will just pop in

Dang it they actually do rub, recon I'd get away with the 165's on these 13x7"s?

Had a chance to check up on the progress of my new motor today while on the way past Tumuka. Not much to report really but the bottom end has been assembled so that's a start. Everything looks pretty good, all nice and shiny and turns pretty easy. Alex says he will try and make a start on the head next week which will involve the new valves and a bit of cleaning up. in other breaking news I've found myself utterly confused with options regarding the megasquirt computer and it's plethora of options but think I've settled on what I need. Just a small bit more brain work to figure out what I need to make the Bosch coil pack do what I need and I'll get that on the way too.

yuss.

Fixed

Got a few things sorted. Gear lever lock-out was all spiffed to fuck so you could hit reverse instead of second, not much fun on the way down the gears. Adjusted with hammer/drift. Fine now. It's been a bit crashy over holes in the road, I thought it was just a Beetle thing.Turns out the rear body mount bolts were loose. One needed a bit of a nip, the other had backed off about 1/2 an inch. These 2 things sorted have made the car totally different to drive. Also tried the rims on for size, they're 8" and they are going to look mint. Going to have to do 2 & 1/2 inch flares which is fine. Anyway, pics. Loose bolts/chrome shocks aye Phone shot Nice.....

Continuing with the brakes I pulled the caliper and line off tonight, caliper was pretty well stuck, neither the slides nor the piston wanted to move.So yeah that required a bit more investigationDoesn't look too bad right?So how about after applying a bit of compressed air into the bleed nipple hole?Mmmmm tasty!Believe it or not I'd already given everything a good squirt of brake cleaner and a wipe down with a rag.Gave everything a damn good clean, used some 2000 paper to clean the bore and piston etc, seals were in remarkably decent condition so I lubed it up and reassembledAlso cleaned out the master cylinder and flushed the line, refitted it all and bled it up.Feels like it's working nicely now, decent pressure etc.The Dio line is way too short for the Gyro though, but I've got a brand new 1100mm braided SS line that was too long for the Let's, which should work out nicely!

Very small next to the mk2

Stripped the China carb for a nosey earlier, can't find anything bad about it besides the enricher feels a little bit loose when fitting it to the carb, but it still seems to seal fine so it should be mint as. Thought some of you at least might be interested in having a look inside an NZ$20 carby And the $15 torque driver I don't know about any of you, but I'm actually rather impressed with both! Oh and I've still got a few surprises up my sleeve...

This is a morris 2 tonn truck loks simlar

Progress has slowly been made, first step was to sell my GTiR to free up some funds, I only got one picture of all the toys together Turns out the guy I bought the car off had a pile of parts to got with the car, a spare carb, the half bumpers, couple spare boots, and the cars original Rostyles! Sadly the lip on one is very rusted but will be saved later on. I bought another set of wheels, just because Took a photo next to my buddys Datsun and discovered why the engine gets quite hot, quite quick

Prepare for a let down of an update... The exciting update turned out to be somewhat of a disappointment. Over the last couple of weeks I've been inspired by @yoeddynz 's Viva and I've decided I want to put the mazda klze v6 into the escort. I did some quick measuring up using dimensions I found online and it looks like it will fit (tightly mind), with some small modifications. I want to put an rx8 six speed gearbox behind it because it is very similar in length to the ford type 9 and puts the shifter in the right spot. There's a guy in the UK that makes adapter plates to out the rx8 box behind all sorts of motors and it's a fairly well documented swap. So that's my new plan; find a kl motor and an rx8 box. I started by looking around for an rx8 box. They're hard to find and the ones on trademe are wanting $1250! The whole reason people started putting these boxes into escorts was because they were cheaper than the seirra type 9s! So for now I'm just going to keep a lookout for wrecked rx8s with either the 5 or 6 speed because they both have the same bellhousing bolt pattern so any adapter plate I make or get made will fit both and I can upgrade a 5 speed if I find a 6 later on down the track. Then I started looking into where to get the engine from. Luckily I found this on trademe. It's a Mazda Capella wagon jap import with the 200hp higher compression klze engine in it. The ad said the gearbox was dodgy and would probably needed replacing but I won't need that. Most importantly, he only wanted $900 for it and it was only in Auckland. I figured I'd drive it home babying the gearbox, pull the engine and sell the rest as parts to end up with a fairly cheap motor. That was the plan anyway... We got down there this morning to find that what he meant by dodgy gearbox was actually a completely non-functioning gearbox that wouldn't pull it away from the curb. Poo. That said, the engine sounded fine and the rest of the car looked really good so the new plan is to find out how much it will cost to get it transported home and as long as it's not too bad I'll truck it back up north and set about stripping it for parts. I'm undecided whether to throw the pinto in for the first while so I can still drive it while I build up the v6 and get it organised, or whether I should put the v6 in to begin with so I can do all the fabrication on it at the same time. At the moment I'm leaning toward the second option but I also really want to get in it and drive it as soon as possible so it's a hard choice. Feel free to give me any suggestions or advice on this mad new development here:

Went to bnt hillside road today. Asked for points and condensor for a 1977 ford transit. He asked me for the rego number.............. here we go. Left with out points and condensor

This is my inspirational pic Keeps me fizzing

And tank had a fair amount in it. Think the flexi hose that connects filler to tank has perished to buggery

Transhit shit begins. Fresh from the uk today. Thanks dad.

I got some more work done tonight. I started off by tacking the wing repair panel in and checking everything for squareness and so on. Looks good. I compared this level reading to one taken from a piece of square tube laid across the rear window frames and they are close enough for me to be happy at this stage. I can fine tune it later on. Then I moved on to the other side. It was in much the same state as the driver's side but I forgot to take a before photo. In any case, this is it after I made up the repair panel and got it fitting nicely. I've not tacked it in yet because I decided to make it as a two-piece panel since the last one was a pig to work on in one big piece. Now I have to make the lower part of this panel. This one I did take a before photo of. You can see the marker line showing where I plan to cut out and replace the old steel. And this is the panel I got knocked up quickly. It's still in need of some fiddling to get it fitting perfect but it was getting late so that's where I left it for now. I might get this finished up and tacked in tomorrow. We'll see how it goes.

Can't get at screws from the inside

It's been a while because I'm back at school now but finally the weekend happened so I got back into it. I didn't take any photos of the other repair panel but I did it the same way as the first. Then I moved on down the front edge of the wing. This is what I had to work with. I decided the best way to deal with it would be to cut most of it off and rebuild it. I started with a paper template. Started to transfer it to steel, Once it was close I cut out the rotten steel and began to offer it up Then I started to trim the panel up to fit the hole. It was about now that I decided it was all going to well and that I should fuck it up to mix it up a bit. So I cut off too much and had to fix the cock up. Finally I got it trimmed and fitting nicely and clamped it in place to check. Primo. I ran out of time to tack it in but I checked all the measurements and it's centered and square so I'll tack it up when I get a chance. I also picked up a new (to me) bonnet which is full of fish oil or some sort of greasy rust inhibitor and in much better nick than my one. So that's another win for me.

Got all the nuts and bolts polished up ready for the platers The last big thing that had to be sorted out was the front brake, my original plan a few years ago was to use this super sweet Benelli item With my plan now to try make a period style racer it was a bit out of place, i remember finding a picture once of a bantam racer from the 50s that had a twin front drum made out of bantam hubs, i think this would look pretty cool as well as hopefully adding a bit of braking performance. A friend sent me a couple of spare hubs he had.. Bit of hacksaw action Faced true Clamped and tacked, I turned up a tube to go through the center of the 2 half's to ensure good alignment before welding Should do the trick

Replaced the water pump. Car is running great again. I love this car, its so damn good. http://www.tasteslikepetrol.net/2017/04/rover-sd1-water-pump-replacement/

[/url I also have a 8ba Manifold and a Ford 94 so i'm thinking of going with a single stromberg 97 and do away with the holley. Thats If the 8ba manifold fits In the mean time Il save up for a triple setup.