Mof Posted December 26, 2022 Share Posted December 26, 2022 Wat it's none of those things I can still read it Quote Link to comment Share on other sites More sharing options...
AllTorque Posted December 26, 2022 Share Posted December 26, 2022 It could be considered c) altered, or d) defaced, or e) obscured, End of the day it’s up to the inspector’s discretion. I would give it a lick of paint stripper to remove any doubt. 2 Quote Link to comment Share on other sites More sharing options...
tortron Posted December 26, 2022 Share Posted December 26, 2022 Does it matter that, that might remove the black printing on it. Because that seems like defacing or altering it too 1 Quote Link to comment Share on other sites More sharing options...
AllTorque Posted December 26, 2022 Share Posted December 26, 2022 40 minutes ago, AllTorque said: End of the day it’s up to the inspector’s discretion. 1 Quote Link to comment Share on other sites More sharing options...
igor Posted December 26, 2022 Share Posted December 26, 2022 So when painting a car it is recommended to mask the tag? Might removing and refitting it not look similarly dodgy? Quote Link to comment Share on other sites More sharing options...
JustHarry Posted December 26, 2022 Share Posted December 26, 2022 Does the rest of the car look dodgy ? If you've take it off and painted the area and reattached with rivets in a tidy fashion. Why would it look dodgy. 1 hour ago, AllTorque said: End of the day it’s up to the inspector’s discretion. If it was a hectic r32 skyline going to vtnz you might have issues. But for most normal people with older cars going to a regular inspection place it's never going to be an issue 1 Quote Link to comment Share on other sites More sharing options...
cletus Posted December 26, 2022 Share Posted December 26, 2022 If you're not worried about cosmetics I'd leave it the way it is. A recently removed and refitted vin tag is much more of a red flag, they are not easy to make it look like they haven't been fiddled with once removed They are stuck on with adhesive so are easy to damage 7 Quote Link to comment Share on other sites More sharing options...
tortron Posted December 26, 2022 Share Posted December 26, 2022 5 minutes ago, cletus said: They are stuck on with adhesive so are easy to damage I have done some testing regarding this, and at about the 20 year mark the adhesive doesn't offer much resistance. The main thing to pay attention to is the rivet spinning just as you break through the cap which will leave an obvious mark 3 Quote Link to comment Share on other sites More sharing options...
cletus Posted December 26, 2022 Share Posted December 26, 2022 It's a huge pain for cert. The correct, legal method for repainting an area with a vin number would be to take the vehicle to a place that deals in vin/compliance etc , they remove the tag and keep it in a safe place, you take the car home and do the paint etc, then once it's done 3 years later take it back to the same vin/compliance place who won't have changed inspectors/lost the tag/ gone out of business, and they refit the tag. In practice, this never happens because nobody knows about this until afterwards Then we have to send them to a vin/compliance place to get confirmation that it is the correct identifier for that vehicle, which can be easy, or a long involved process with forms and approvals from nzta 4 1 Quote Link to comment Share on other sites More sharing options...
Bling Posted December 26, 2022 Share Posted December 26, 2022 The VIN being painted is probably least of the worries (come WOF time) on that vehicle if masking it was too much work. 1 2 Quote Link to comment Share on other sites More sharing options...
kicker Posted December 26, 2022 Share Posted December 26, 2022 I had a wof guy knock me back for a hard to read chassis number, I thought it was fine but his eyes must have had too much toe in or something. A clean and some black paint wiped into the stamping and we were all good. 1 4 Quote Link to comment Share on other sites More sharing options...
tortron Posted December 26, 2022 Share Posted December 26, 2022 I have a bike with the vin under the seat, which is bolt on, and the chassis number on the headtube is fully filled with paint (and if you search for that number nothing comes up anyway) Life is pain Quote Link to comment Share on other sites More sharing options...
kws Posted December 27, 2022 Share Posted December 27, 2022 The whole car will visually be dodgy thanks to the previous owners attempt at painting it, but mechanically and structurally it'll be sound. I guess i'll give a WOF a punt and see what happens. Its easy to read, but i guess if they fail it for being painted I need to drop into VTNZ and get a new tag made? Quote Link to comment Share on other sites More sharing options...
Bling Posted December 27, 2022 Share Posted December 27, 2022 Take a punt as you say, some won't care, some might. You haven't modified it at this point so I don't see any harm in going for WOF. Just blame previous owner if it's picked up. May well be a non issue. A quick drive past VTNZ to get their view won't harm either though. Quote Link to comment Share on other sites More sharing options...
Valiant Posted December 30, 2022 Share Posted December 30, 2022 Hi Guys . Can someone refresh my memory on high stop brake lights. Are they still a must have on vehicles registered after date "X"? Thanks. Quote Link to comment Share on other sites More sharing options...
Mof Posted December 30, 2022 Share Posted December 30, 2022 1st Jan 1990 https://vehicleinspection.nzta.govt.nz/virms/in-service-wof-and-cof/general/lighting/high-mounted-stop-lamps Mine is 1993 and has never had one 1 Quote Link to comment Share on other sites More sharing options...
AllTorque Posted December 30, 2022 Share Posted December 30, 2022 “first registered or manufactured“ So 1989 or older don’t need a high stop even if they are recent imports. 2 1 Quote Link to comment Share on other sites More sharing options...
Valiant Posted December 31, 2022 Share Posted December 31, 2022 Thanks Guys. Quote Link to comment Share on other sites More sharing options...
shizzl Posted January 3, 2023 Share Posted January 3, 2023 So ive been looking at the surge tank set up for the hunter. Have a bosch pump and a generic surge tank. This photo shows how i think it could be mounted. Ill mount the tank and pump to an offcut of ally 200x50 so that it can all lay on the same plane. Floor area in the boot is not flat. This piece will have tabs welded off it for mounting to the body. Now the fuel lines. Can they run into the "spare wheel well" then through the skin via grommets to get them under the car? Ill be runnjng hardlines front to back, with efi line connecting both ends and surge tank etc. Lift pump is mounted under the car as its was running the 12a. Am i right in thinking the line at the top of the surge tank is a breather and gets vented through the floor? Quote Link to comment Share on other sites More sharing options...
Raizer Posted January 3, 2023 Share Posted January 3, 2023 35 minutes ago, shizzl said: Am i right in thinking the line at the top of the surge tank is a breather and gets vented through the floor? Normally return line from fuel pressure regulator. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.