GuyWithAviators Posted February 21, 2023 Share Posted February 21, 2023 Enjoy your work by the way. Excited to possibly catch a glimpse of the truck this weekend. 1 Quote Link to comment Share on other sites More sharing options...
GregT Posted February 22, 2023 Share Posted February 22, 2023 Too late to do this for the weekend ? Future prospect as another use. Quote Link to comment Share on other sites More sharing options...
ThePog Posted February 22, 2023 Author Share Posted February 22, 2023 2 hours ago, GregT said: Too late to do this for the weekend ? Future prospect as another use. I already have a camping setup that will be along with me, plus a metric fuckton of other stuff. 1 Quote Link to comment Share on other sites More sharing options...
keltik Posted February 22, 2023 Share Posted February 22, 2023 Some people put wheels under the caravan so you can tow it behind. Genius I know. Relate hard to the oil pressure gauge story after chasing a high oil pressure issue on the jet boat which didn't exist. 5 Quote Link to comment Share on other sites More sharing options...
Bling Posted February 22, 2023 Share Posted February 22, 2023 On 21/02/2023 at 12:45, ThePog said: Its a custom vehicle, the reg wont tell you anything. *under his breath but clearly audible* Ah for fucks sake. What do you want then? I laughed a bit too much at this, even heard him say it. 2 Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted March 6, 2023 Share Posted March 6, 2023 once upon a time people at parts stores actually liked cars. years back i stayed at supercheap for way too long under the impression i was getting a full time slot at the new store opening. store opens and i get the ole them 'oh we need your expertise at this store' me 'ok fine but still full time eh?' them 'nah' me 'oh well i quit then' them left and went to BMW parts for a year while i waited to enlist. dumb fucks could have kept me for like 10-15k more a year (not a pay rise just more hours) during that time period i vividly remember a job advert for repco with a line that read an interest in cars is not required Edit - i thought this was a spam channel 2 4 Quote Link to comment Share on other sites More sharing options...
Truenotch Posted March 9, 2023 Share Posted March 9, 2023 On 03/11/2022 at 20:30, ThePog said: Time to crank up the router so i can woodprint some 'Its motherfucking Dynafari time' tees... Can we get Dynafari T shirts please!?!?! 2 Quote Link to comment Share on other sites More sharing options...
ThePog Posted March 9, 2023 Author Share Posted March 9, 2023 1 hour ago, Truenotch said: Can we get Dynafari T shirts please!?!?! Its somewhere on the list. Quote Link to comment Share on other sites More sharing options...
Willdat? Posted March 9, 2023 Share Posted March 9, 2023 20 minutes ago, ThePog said: Its somewhere on the list. Printpoppa does 'em $32.43 a piece on AS colour shirts. Sorry sorry sorry I had to say I had permission to use the image.... Quote Link to comment Share on other sites More sharing options...
ThePog Posted March 9, 2023 Author Share Posted March 9, 2023 I was thinking a limited run of handcarved woodprints. Limited by how bored i got after printing 3 of them 9 Quote Link to comment Share on other sites More sharing options...
igor Posted March 9, 2023 Share Posted March 9, 2023 Real OS prints. Quote Link to comment Share on other sites More sharing options...
Popular Post ThePog Posted July 3, 2023 Author Popular Post Share Posted July 3, 2023 Did this for the lolz with my new printer; 38 7 2 Quote Link to comment Share on other sites More sharing options...
GARDRB Posted July 5, 2023 Share Posted July 5, 2023 On 03/07/2023 at 19:23, ThePog said: Did this for the lolz with my new printer; Fuck that's cool, clever way to get two colours too, I'm gonna steal that technique 3 Quote Link to comment Share on other sites More sharing options...
cubastreet Posted July 5, 2023 Share Posted July 5, 2023 Cos pausing it when it gets to the letters and changing the filament is cheating. Quote Link to comment Share on other sites More sharing options...
HumberSS Posted July 13, 2023 Share Posted July 13, 2023 I feel like you need the word 'Jah' above Dyna 3 Quote Link to comment Share on other sites More sharing options...
Popular Post ThePog Posted September 30, 2023 Author Popular Post Share Posted September 30, 2023 Just doing Dynafari things 20 1 Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted October 1, 2023 Share Posted October 1, 2023 Off to the scrap steel place? Bugger. I need some Iron for some wood and bike sheds etc Quote Link to comment Share on other sites More sharing options...
ThePog Posted October 1, 2023 Author Share Posted October 1, 2023 14 minutes ago, yoeddynz said: Off to the scrap steel place? Bugger. I need some Iron for some wood and bike sheds etc Ha I did think about asking but there were only a few good sheets. I brought the garage down with a digger and most of that was only flattish because I jumped on it so it would stack better Got $150 so cant complain. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post ThePog Posted October 20, 2023 Author Popular Post Share Posted October 20, 2023 22 Quote Link to comment Share on other sites More sharing options...
Popular Post ThePog Posted May 9 Author Popular Post Share Posted May 9 Dredge from many pages down. I hit 25000kms the other day, I was wondering how many scratch builts actually get used that much.... Anyway, 25k seemed to set off a run of fuckery with the old girl. On a trip back from a job it started to make a rattly noise around 3k revs, so I nursed it home and did some investigation without many results. Then someone suggested replacing the harmonic balancer so I figured why not and ordered one. As I was walking down to check the mail I thought to have a quick look at the condition of the existing one. When I looked I saw that there was no nut on the crank..... I guessed this was probably the cause of the rattle. I fitted the new balancer and decided that the wee bit of slop that now existed in the keyway was acceptable enough, and the shaft seemed ok. That worked fine and it runs quite a bit smoother now, unsurprisingly. I found another spare nut in case the new one falls off... Then almost immediately it started to dump oil from somewhere. Like half a cup per trip dripped out once stopped. I suspected the turbo as this seemed to be on having a crisis, there seemed to be a certain amount of oil getting into the inlet tract, and the bypass valve that I welded up to stop it rattling had come loose and was rattling again. Further investigation seemed to confirm that was the issue. A year or so ago @fuel gave me his old TD05 that was significantly nicer/newer in all respects and had a way better bypass design, this has been sitting on my shelf awaiting fitment. So this weekend I cracked on with the swap, it was surprisingly time consuming, just cos things are tight in there and I have ham hands. Obviously I had to set the rotations to suit and mod the actuator lever position, you can just see this below. Different valve designs. The inlet was a little bigger so I had to mod a pipe and find a new silicone joiner. That was pretty much it, but it took the whole weekend plus another evening, I wasnt rushing tho. I also tidied up the catch can situation while I was there, changing shitty bent/kinked tubes for hardpiping, then bolted it all back together. All seems well now, but I have a trip over to Mot tomorrow so that will tell me some things. Next time I guess it will be the 50k running report.... 23 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.