Snoozin Posted June 18, 2013 Share Posted June 18, 2013 I need to remove the screen from the Datsun, it's one of the kind that are glued in. Obviously I know I need to remove the stainless trim surrounding it, but where to from there? What are the best methods and tools used, so I can ensure I get this thing out in one piece? Sheepers mentioned a device that requires someone from inside and outside the car to cut through the glue, sort of a thin wirey blade type thing but wasn't sure of it's name or suchlike. Any tips? Cheers! Quote Link to comment Share on other sites More sharing options...
Toucan Posted June 18, 2013 Share Posted June 18, 2013 Prob shouldn't reply as I have never done myself, but I have heard the best way is with a guitar string, 1 person inside and 1 person outside, sawing motion 1 Quote Link to comment Share on other sites More sharing options...
durty Posted June 18, 2013 Share Posted June 18, 2013 I have used a thing that was pretty much piano wire between two handles. Got it through bnt Took it slow and steady and won the race Quote Link to comment Share on other sites More sharing options...
Snoozin Posted June 18, 2013 Author Share Posted June 18, 2013 Rad thanks man, that's the kind of thing I am after Quote Link to comment Share on other sites More sharing options...
kyteler Posted June 18, 2013 Share Posted June 18, 2013 I have another way but it's messy. White spirits will slowly eat into the glue and release the screen but it can take a while and you have to por it in and slice in as much as possible with a blade, etc. It's how I've done it a few times, less pressure on or near the edges of the screen to risk that doomish crack that makes your stomach drop. Quote Link to comment Share on other sites More sharing options...
durty Posted June 18, 2013 Share Posted June 18, 2013 Handles unscrewed in the middle so the wire can be replaced if it snaps etc, could probably make the same thing for cheap enough I would think but effort makes buying one much easier. Was pretty cheap with bnt hook ups. Not sure what brand it was but it had to be ordered in overnight Quote Link to comment Share on other sites More sharing options...
Brock-Lee Posted June 18, 2013 Share Posted June 18, 2013 I tried to use one of those hook things that you pull around the screen with a handle and cut my hand and smashed the screen. Dont use one of those/ lingpost 2 Quote Link to comment Share on other sites More sharing options...
SunnyCoupe Posted June 18, 2013 Share Posted June 18, 2013 never have I wanted to Ctrl+Z so hard in real life than when that doomish crack comes and says g'day. 5 Quote Link to comment Share on other sites More sharing options...
FuzzayD Posted June 18, 2013 Share Posted June 18, 2013 yeah or a big meaty craft knife. I did one with piano wire but it was too hard next time i used a craft knife to cut the layer that over laps the glass on the outside and just poped the window out the front Quote Link to comment Share on other sites More sharing options...
Evan Posted June 18, 2013 Share Posted June 18, 2013 piano wire/music wire with a handle on each end/wrap the ends around a couple of small pieces of wood. the thinnest piece of wire you can get will cut through it the fastest however it will snap the most often think I used wire that was 0.02mm thick or something. use a long piece (1 metre-ish if possible) and keep the motion steady. should be able to cut it out in about 10-15mins if you are careful. you may go through a few pieces of wire doing it. I got lengths of wire from the Frankton model shop (which is nowhere near you) as music shops don't retail it for some reason. Quote Link to comment Share on other sites More sharing options...
camo_78 Posted June 18, 2013 Share Posted June 18, 2013 best method ive seen is soapy water in a squirt bottle and craft knife on the INSIDE of the window.its a lot easier if the dash etc is out first though . Quote Link to comment Share on other sites More sharing options...
DJZ Posted June 18, 2013 Share Posted June 18, 2013 I bought one of these and have done two windscreens with it now, once you get the hang of it they work pretty well. I heated the glue with a hot air gun then managed to slip this in from the outside, then you pull it along slowly cutting it. I know you can get the wire cutters but I'd be worried about scratching the paint etc. Quote Link to comment Share on other sites More sharing options...
Brock-Lee Posted June 18, 2013 Share Posted June 18, 2013 That is what I cut my hand with and busted a screen^ hah, looks like I was doing it wrong. Quote Link to comment Share on other sites More sharing options...
Bene Posted June 18, 2013 Share Posted June 18, 2013 I recommend the metal string and handles for DIY, its cheap and usually fast (depends on your talent for it)If the windscreen was previously replaced its usually a bit harder to do, because people use too much glue. 3/4 - 1 metre wire works best (depends on space inside car). Don't try to pull too hard, you want to get the wire hot through movement. sign for doin it right is when it starts to smoke a bit. guide the wire around the screen so you dont cut your paint, apply tape where it is a bit tight an on corners, same for dash and roof lining, can even tape some cardboard stripes close to the screen if you want to make a 100% sure. cheers, bene 2 Quote Link to comment Share on other sites More sharing options...
Threeonthetree Posted June 18, 2013 Share Posted June 18, 2013 In the past, I have used a handbrake cable with a screwdriver wrapped around each end. But that was because I didn't have the proper tool with me and need the windscreen out in a hurry. Was fairly slow, but you have to be regardless of what you use. Otherwise, I use the same tool that Durty mentioned. Just saw through smoothly and slowly with a mate but keep going. Keep that wire hot. Person on the inside can gently push the screen out with their feet to aid the cutting process and to finally free the windscreen. Quote Link to comment Share on other sites More sharing options...
nzstato Posted June 18, 2013 Share Posted June 18, 2013 Mig wire works well also.... 1 Quote Link to comment Share on other sites More sharing options...
Bling Posted June 18, 2013 Share Posted June 18, 2013 Have used a push bike brake / gear cable before, too many times in fact. I'm sure the right tool shown above would make the job easier though! Two people would be a must with a wire, takes way too long without someone on the other end. Quote Link to comment Share on other sites More sharing options...
slacker.cam Posted June 20, 2013 Share Posted June 20, 2013 I've done the piano wire and two random bits of wood for handles technique twice before if you want a hand. Just use a craft knife to make a little hole and then slip the wire through. I wen to my local hobby store for piano wire but there may be better places. Quote Link to comment Share on other sites More sharing options...
Rookie Posted June 20, 2013 Share Posted June 20, 2013 I too have done the piano wire trick. I would pay someone to take it out for me... Quote Link to comment Share on other sites More sharing options...
Goat Posted June 20, 2013 Share Posted June 20, 2013 ^Rookie yes. Pay some one 80 bux to take it out. Save hours of fucking round and all the stress. hah And if they are going to put it back in again, they usually only charge when they come and put it in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.