SHGWAG Posted July 9, 2009 Share Posted July 9, 2009 As per FLAWLESS' request, Thought I'd start a project thread on my build. No pics on the work computer so I'll have to wait till I'm at the old's place to upload. What It Was: 1992 Mazda RX7 Series 6. Stock apart from the following: HKS Super BOV II 3 inch cat back exhaust Excedy hyper heavy duty clutch De spoilered Boost gauge Last year it decided to spit a corner seal so I took it off the road for a quick rebuild... How wrong I was What It Is: Since then I have done the following: Kei Office height, preload & damper adjustables from my brothers old S7 Fitted S7 RX 330mm rotors & 4pot fronts with decent pads 18 x 9 & 18 x 9.5 Enkei Racing R wheels wrapped in Perelli PZero Neros Series 7 Tail lights Tore the block down & have had the plates bridgeported, needs alot of work still. Masterpower GT45 Turbo 2x 880cc injectors & 2 x 1680cc secondarys (Have two more 1680s in case i need them) Big Frontmount with associated piping 80mm throttlebody 6 piece C-West kit Sony Xplode head unit What I Want It Needs: Fuel System Alloy Radiator ECU (Link G4) & Ignition Finish the block (Stud Kit, SCR seals & new bearings) Exhaust Manifold & exhaust to suit Wastegate New BOV Properly fit the kit then panel & paint New S8 Indicators to fit into the kit Scoot Style Bonnet New Clutch, Excedy wont be up to the task. Maybe fit a GT wing Maybe some new sounds Probably a shitload more but I'd have to remember it. Will upload Pics when I can. Aiming for 450hp at the wheels, which has been achieved easily with similar setups Feel free to discuss Link to comment Share on other sites More sharing options...
Black Francis Posted July 9, 2009 Share Posted July 9, 2009 should get in time machine and get plates extend ported. add 1x to4z. boost Link to comment Share on other sites More sharing options...
SHGWAG Posted July 10, 2009 Author Share Posted July 10, 2009 How it was, bog standard Adjusties in FMIC in C-West front kit Kit still needs fitting so all the gaps line up properly. Link to comment Share on other sites More sharing options...
SHGWAG Posted July 10, 2009 Author Share Posted July 10, 2009 should get in time machine and get plates extend ported. add 1x to4z. boost That was one of the options i had looked at, decided more lag was needed Link to comment Share on other sites More sharing options...
Guest Posted July 10, 2009 Share Posted July 10, 2009 what does that say on the windscreen? Link to comment Share on other sites More sharing options...
danger Posted July 10, 2009 Share Posted July 10, 2009 would hazard a guess at demon rotorsport Ever considered a job as a puppeteer? Link to comment Share on other sites More sharing options...
rot808 Posted July 10, 2009 Share Posted July 10, 2009 needs more burnouts, wheels are meke, giz your flash engine btw Link to comment Share on other sites More sharing options...
Dell'orto Posted July 10, 2009 Share Posted July 10, 2009 would hazard a guess at demon rotorsport Mmm, silicone.... Link to comment Share on other sites More sharing options...
Truenotch Posted July 10, 2009 Share Posted July 10, 2009 I'd put my fist in it. Link to comment Share on other sites More sharing options...
johnnyfive Posted July 13, 2009 Share Posted July 13, 2009 Should roll stock without kit but with heaps slam. Wheels work tang plz Link to comment Share on other sites More sharing options...
SHGWAG Posted July 13, 2009 Author Share Posted July 13, 2009 Should roll stock without kit but with heaps slam.Wheels work tang plz Goes another 2.5 inches lower on stock wheels without guard rub / kit just misses the ground. Should really start working on this thing again. Link to comment Share on other sites More sharing options...
shizzl Posted July 13, 2009 Share Posted July 13, 2009 mmm xr6t in this would be swish... go the tang Link to comment Share on other sites More sharing options...
Black Francis Posted July 14, 2009 Share Posted July 14, 2009 olols im sure demon rotasport was the place me and rot808 went to get his bp plates. some guy who works in a garage at his house? cuts the ports with a cold chisel? writes hiz recetp lik dis edit: btw those wheels are the best thing ever. Would look so hot with matt black r exs seven series 4 Link to comment Share on other sites More sharing options...
SHGWAG Posted July 14, 2009 Author Share Posted July 14, 2009 Yuh, works outa his garage, from my searching around, theres alot of shit talk about him on havik, but I've only ever had good dealings with him & from the people I've talked to about his blocks, none had anything bad to say apart from prices. Did have a passing thought of painting the bitch matt black, but wouldnt really suit / My brother reckons it would look tite as fuck. You guys think I need a lil dish? Thinking of powdercoating rims white or re-doing the red Link to comment Share on other sites More sharing options...
FLAWLES Posted July 14, 2009 Share Posted July 14, 2009 rims are sweet atm aye but a better offset rim/wheels is always a good idea a good mate of mine had nothing but issues with a demon rotasport ( i think this is the one is he basied on the east coast? hastings maybe ?? ) with a engine that he got from him, ripped it apart and there were diff lenght dwell bolts/rods or what ever there called, seals where missing, had been put together with a fucked housing ended up finded these's sweet dudes from hamilton ( off rotahavok ) and they put the engine together for my mate, done a sweet job engine never missed a beat wish i could remember there names by my rims lol Link to comment Share on other sites More sharing options...
shizzl Posted July 14, 2009 Share Posted July 14, 2009 is the havik site still up?i cant seem to find it these days.. matty b would look evil...but satty b would be better Link to comment Share on other sites More sharing options...
Mr.Mk1 Posted July 14, 2009 Share Posted July 14, 2009 Havik is down for a bit. Try again in a few weeks? Link to comment Share on other sites More sharing options...
SHGWAG Posted July 14, 2009 Author Share Posted July 14, 2009 rims are sweet atm aye but a better offset rim/wheels is always a good idea a good mate of mine had nothing but issues with a demon rotasport ( i think this is the one is he basied on the east coast? hastings maybe ?? ) with a engine that he got from him, ripped it apart and there were diff lenght dwell bolts/rods or what ever there called, seals where missing, had been put together with a fucked housing ended up finded these's sweet dudes from hamilton ( off rotahavok ) and they put the engine together for my mate, done a sweet job engine never missed a beat by my rims lol DRS is in Hamilton out Nawton ways Bei. But yea, apparently there was two guys using the same trading name awhile ago which is where the shit has come from, from what I've heard. Will Giv $200 for said wheels, want to finish 7A-GE project before cracking back into this. And yes, Havik is fucked ATM (At The Moment, NOT Ass To Mouth) Link to comment Share on other sites More sharing options...
Brock-Lee Posted July 14, 2009 Share Posted July 14, 2009 stock front with that men as fuck stock lip and max low plz. these are such a win stock bodied car. Link to comment Share on other sites More sharing options...
Toucan Posted July 14, 2009 Share Posted July 14, 2009 Ye kit is even gayer than the rims Link to comment Share on other sites More sharing options...
Recommended Posts