Leaderboard

Just needed a bulb. Too easy

Pretty much back together again, currently masked up to spray the satin black on the pillars and window frames again. Have flicked some aerosol black around underneath to cover overspray and stuff too. im seeing if I can sort another front bumper cause this one doesn’t line up for shit. It’s pushed in and up about 15mm so touching valence in middle and pulls the sides away from body. I tried tweaking it and it tore. Lol. screen rubbers will be about 10 days away x Canada. Took a chance on quality but it’s half the price of local Thai stuff. have placed order for new headlining but no idea on a finish date. Here’s the last pic I took a few days ago

Stoked! He was very happy with everything, the only issues being the brake booster vac hose needs to be to spec and the brakes start to fade half way through the cyclic brake test. I'll try some fancy brake fluid & maybe different brake pads, but he did say the first 2 applications were up to spec so I'm hoping I wont need to go crazy. Worst case I do have a spare disk rear end from a MS112 I could use which might help. All things considered I'm very happy with that result.

Last job before cert was the dash lights. I joined the tail warning & headlight warning lamps together to make space for an engine check light. The current symbols are etched onto clear plastic so I couldn't clean it off. My father in law came to the party with his new engraving machine that he was playing with over the lockdown. After he drew up the new design and calibrated it he got a great result! Only problem with a good job is no one will ever notice it And she's done! Off for cert to see what I've missed, hopefully it's not a large list!

Scored myself a Z18ET with a heap of spares for relatively cheap, motor is in pieces but prime for building up for the coupe! Link ecu, tickled up turbo etc, should go much better than the Z20E. Even managed to find a factory turbo dash cluster and boot badge to match the trim level of my car! Slowly assembling the peices ready for a direct drop in!

A few pics once I put some 10kg springs in the rear as 6kg was way too soft!

So a week after it got a wof, this happend S13 front and rear setup, with Cusco 910 specific camber plates up front sourced from Japan. Also put some coby extractors on it along with 2" mild all the way through to a cut through muffler with twin stainless 1.5" tips which gave it a good note and a bit more grunt!

I was sent this scan of a article in a magazine from Japan, got me thinking about a spoiler and i realised that I had this NOS rubber universal one that I got off trade me years back, perfect size!! Slogan on the box is the best bit haha

made some mods to my sandblaster and its fucking cash. so the old venturi suction sandblaster feed is a bit shit what with sand/media being really heavy and all. you need to run the biggest nozzle to get enough air flow to raise the sand and then there isnt enough velocity at the nozzle to really do fuck all once you do raise the sand up from the bottom. so i made some mods to mine to effectively run a "total loss" sand system. it works mint. so the sand sits in the funnel at the top and gravity feeds the handpiece. i can now run the smallest nozzle and the velocity is good so it removes rust/paint/crud quickly and really well. the funnel full of sand lasts ages because you only need the small nozzle. I've cantilevered the cabinet out off the bench so i can pull the bung and drain the media into the bucket, then just tip it into the funnel again. fuckin too easy. i could run the thing without the bung probably, haven't tried yet. visabality is good too with the vacuum stuffed in the side. the whole things is a win in my book. 2020-05-14_06-16-08 by sheepers, on Flickr 2020-05-14_06-15-59 by sheepers, on Flickr 2020-05-14_06-15-51 by sheepers, on Flickr

While on a 910 parts mission at pickapart, this Honda city was sitting adjacent to it and the lip intrigued me. After removing about 10 bolts I sat it on the stray 910 valance laying on the ground, it wasnt far off being a good fit! Bought it along with a heap of little thing to tidy the coupe up and mounted it up and paint matched it that afternoon - took very little modification to mount which was awesome!

I haven't had much experience with panel repair, and it shows! But its now rust free in the important parts and I think I'll be able to clean it up to a paintable state after cert. This corner has been bothering me for a long time so its nice to have it sorted. You can see where the water was sneaking in at the bottom of the C-pillar and keeping the whole R/R wheel arch damp. I've used a syringe to squirt Rust Converter into all the gaps incase there was some rust I missed.

i jsut want to have fun, thats all.it may not be built with a big fancy turbo and all the e-fame attachments, but i have alot more fab skills and knowledge these days so heres to a good laugh and many grassroots motorsport days to come. also working in the garage,garden is the only way my brain isnt in engaged in overdrive, its my own kind of therapy i guess.

Velocity isnt fixed Like, velocity at 4000rpm will be half of velocity at 8000rpm.... And dont be too generous towards OEM. On one of the Barra motors, it had variable valve timing, but the table in the ECU was blank. They just did all of their abstract validation bullshit and forgot about it! And I remember seeing some pictures from when they were testing exhaust manifolds design for the FD RX7. they were just throwing shit at a wall and seeing what sticks, with some fairly oddball designs. OEM has an extra layer of unhelpful complexity in that they're not trying to build one of something, they need to figure out how to make thousands apon thousands, in a way that uses the least amount of time and money. So yes they have good R&D budget but their goals are very different too. In my mind it's hard to beat real life testing. You dont need to know why something works, just that it does.

Just awaiting a Cusco strut brace and a Royal Clover key to turn up from Japan Also scored an old Blitz SS Bov for the turbo build, best sounding bov in my opinion!

Wee bit of an interior tune up plus a sub install, Autolook and Kenwood components through out! Even a NOS Key Beam unit which beeps when you open the door with keys in the ignition!

Clean sheeted a wof, couldn't believe it myself! Was so stoked!

Next up was the rust repair on the sill, got a good mate to do it, not bad for an auto sparky!

One of the first things I did aside from a good clean was to track down a SSS grill badge which it was missing and also chucked some new tyres on a set of 15x6.5 Linea Sport wheels that I had lying in the shed! Also fixed one of the mirrors that was missing the motor mech out of it which holds the glass in, was a $5 fix - some random fender mirror I got from a swap meet years back

Got it home and gave it a clean, picked it up for $1900 in the end!

On Facebook I stumbled across this 910, Z20E 5spd, a sweet two tone colour and reasonably close to home so was too good to pass up going for a look! Reg on hold and reasonably complete it wasnt too bad in regards to the $2000 price tag that he was asking. Interior needed a tidy up and some rust needed fixed, but overall a solid runner and straight vehicle

Alrighty The car has undergone a few changes. Something that drastically needed attention was the rear spring perches on the diff. The diff is an F series out of a Liteace Van and had the AE86 mounts swapped on to it. What a great idea I thought! as I purchased this off TradeMe.. Check out the state of this. No idea what it did to the actual ride of the car being like this but it's always crippled my brain bones when I thought about it 95055142_2587530994857642_8016735613954818048_n by phillipbaines, on Flickr Cut bracket off: 20200502_151932 by phillipbaines, on Flickr Tack in better position: 20200502_153711 by phillipbaines, on Flickr Glue in and appreciate the view: 20200504_134955 by phillipbaines, on Flickr After market cams from Auckland Cams have been acquired and installed: Handee-Dandee printable cam degree wheel. 20200411_125318 by phillipbaines, on Flickr I forgot to get a pic with the dial indicator gauge sitting in there for cool effects but.. they're dialed in! They're a fast street.. turbo cam which leads me to my next photos 20200411_125336 by phillipbaines, on Flickr Into the shop she goes at Syndicate Fabrication in Feilding to get some bloowey stuff sorted: 20200509_123358 by phillipbaines, on Flickr I think i'll be relocated my battery.. 96582311_1183989831941174_4131192127054938112_n by phillipbaines, on Flickr Intercooler mounting: 96234626_1335441543317696_5237312287865307136_n by phillipbaines, on Flickr 97052531_332330944406187_4372249077803384832_n by phillipbaines, on Flickr 96801806_1065109070557228_3969570824079278080_n by phillipbaines, on Flickr 96754189_684652285666769_2128768315122778112_n by phillipbaines, on Flickr 97122736_600582834146913_7398048078931951616_n by phillipbaines, on Flickr 97041947_726147548188757_5675273285609193472_n by phillipbaines, on Flickr 97470685_196968697946098_5761960599114219520_n by phillipbaines, on Flickr I'm excited, it's looking the tits, I will update as I get more pics! Work done by: https://www.facebook.com/SyndicateFabrication/ Discussion:

Along with. " I don't know how it works, but I know how to make it work." you have a winning combo

that was the original dissusion haha. and rattle cans without some sort of UV protection on them can get in the bin. i did spray the advan livery on my mates mx5 with rattle cans and 2k clear overtop. it came out bloody mint, though has showen adhesion issues between the rattle can and clear in some areas (could have been a clenliness or technique issue though). the whole job cost less than 300 bucks, was done in less than 48 hours and has lasted years. all paint zero vinyl.

9 years ago

I emailed them about the price drop after I bought it and they are giving me the difference as a voucher. Great service. I’ll use it to get some more belts.

I just ordered the tool shed one. No one ever regrets buying tools.

oh, fuck something i forgot to mention, now that the cabinet has effectively no sand in it its light as and i can just lift it down and store it under my bench when im not using it. also a win.

Went and got it from the lockup today took it home and washed the genuine barn find dust has been washed off (don't tell the council). Looks okay wet, I'll have to give it a good detail one day past me even did a oil change before I parked it up. Must be good for another 5 years at this rate lifters still sound bad but I'll install another radio to fix that. Booked in for a wof check tomorrow. Did a light check and fondles all the grease nipples. Place bets on failure sheet now

Do you mean having an electric cut out to dump the exhaust before the mufflers, but then having it capped so the electric cut out cant be used? That would be one of those situations where it doesnt say you cant do it in the rules, but I wouldn't cert it because it is obvious the cap would be left off so the electric cut out could be used A bit like people who have externally venting wastegates who put a cap over the outlet so it's not venting at all any more

So I had this HIPPO bucket seat that I had imported from Japan years back for another car that wasn't being used so decided to find a rail for it to suit the 910! Found one from a fellow 910 owner - bless his soul!

Next up was an interior tidy up. Seats are torn and brittle and the parcel tray was not the nicest. Re upholstered the parcel tray and applied some period correct Kenwood shelf speakers. As for the seats a simple set of covers were added! Also a MOMO Daytona wheel and other accessories

Go straight through 14point7, better pricing and way better than innovate

I'd also buy direct from 14point7 (well, I did, and no regerts).

I've never noticed any issue with blanking the EGR completely and leaving the butterflies as is, and I've blanked a few.

Thanks man, I get that.. maybe I'll just chuck a cutout in with a bolted blanking plate instead.. Only wanna put one in to be loud at old school drag day.. won't be fast, so need to be loud to make up for it

You don't have to, but it serves no purpose anymore. It does quieten down the idle a little bit but hardly. EGR doesn't normally function at idle, it's more of a light load situation and the engine still eats fresh air in the process.

Spoil-sport!

Thanks mate, just bought one. Looks like good value for money.

Dang that’s so good let me know if you ever want to sell

Those repairs look legit, give yourself more credit!

Cert day is fast approaching! I’ve ripped out the seats, collected all the 5c coins, chopped the driveshaft hoops to suit and put it all back together with some beefy doubler plates. Hopefully I’ll never have to use them!

in today's installment of I'm a tightarse and a Barry 1x $20 clearance muffler. 3" inlet and twin 2.5" outlet. Thats not going to work with the 2.25" piping chop the ends off you don't need chop a piece of plate the right size and hot metal glue it wang the 2.5" end over the 3" taper bit and weld that up too. accidentally do a okay looking weld bit of flap disc and paint love and its as good as new!

I thought this one looks a bit more interesting/better than most flat decks

"Hey, I bet I could find an old key that describes your entire life" "What are you talking about, thats crazy" "Oh yeah, check this out" "....weelll, shit"

Let the exhaust barrying begin. The headers haven't arrived but they are 2.25" outlet. I've ordered sta finest press mandrel bends because cheap. I was figuring out what to do for mufflers and remembered I had a m&h (because cheap) chambered thing in stock so I'll use that. I was thinking about a reso or something as well but didn't have a great time with the cheaper ones lasting. Was sorting through the shed and found the wrong reso I brought for the crx. I'll barry up a reducer/expander up make it meet the 2.5 of the reso. Yes it's rangi and barry spec but it's what I've got in stock and want to afford. Shits just going to end up sitting in the shed and get scrapped otherwise

Had some yarns with henry at Auckland cams yesterday. We debated if we went for a stage 2.5 or three and ended up on 3. Should have a bit of a noticeable idle and wake it up a bit more everywhere else Picked up this lot today Let the 202 turd polishing begin. I'll slowly collect parts and will pull the motor and give it a refresh in the the future. My goal is to have it 'feel' faster than my worn out sohc honda motor with 300 thousand km on it. Maybe even break through the 20 sec 1/4 mile mark. I'll keep a eye out for a weber to replace the stock stromberg. I'd like to keep it as stock looking as possible in the bay Cam specs

I just came across this photo of this car in its former life. Thought I'd drop it here for old times sake.

so as you know if you have read this topic this year i swapped the original motor out (because it was starting smoke real BAD!!) i put the one that came in the parts car i bought in after swapping all the shit from mine onto it......and all was good with the world...it started ,ran well,and didn't smoke..... this one and then one day on my way home from work it started rattling ....and it didn't go away.....and it started bleeding oil all over everywhere i parked.....(at this point i knew J-W-G was selling his 2.0 out of his mk3) so thought i would try and fix/fuck mine https://youtu.be/BaPxkhkxBoE 2 things happened that night ...1 i didnt fix/fuck it....2 it sounded better and the rattling when a away........................................for 9 hours. so i bought J-W-Gs motor and he kindly dropped it off for me on the Saturday....i didn't do anything with it till the flowing Monday... Drove the old girl to work and it was getting worse so came home and pulled the motor out swapped the flywheel ,p-plate,clutch ,inlet and carb onto the motor(3rd this year) i got from Jesseas i know they worked well on past 2 motors (and against my better judgment not the water pump or thermostat) ....put it all back together and it ran like a dream fried straight up and didn't sound like a diesel...after a couple of days it did pick up a slight knocking sound (that when away when the clutch pedal is even lightly pushed (so wasn't to bothered )..and had a massive hesitation when you put your foot down.(found that to be coil to dizzy HT lead........the hard way......heeeelll of a jolt). then this monday i left to go to work and got a few ks from home and temp was well over half way(normally the fan is just kicking in as i get to work )...it was a hot ass morning tho. got it back home and it was very low on water.....so i bit the bullet and pulled the motor back out ....replaced the water pump and thermostat from mine......i know....i know. found the knocking to be a stone jammed in the sandwich plate ......before you ask ...fuck knows. i also decided to give it a blast and quick paint...and water last the engine bay and put it back together..... and give the old girl a wash......shes happy as now and back to being 100%. cheers all

Coming up to 2 years since I got this engine, I'm hoping I can get it moving under it's own power this month. The engine is bolted in for the last time now and the gearbox crossmember is all sorted. The lengthened driveshaft fits beautifully, the clutch is bleed up and the pedal feels great! Next up is finishing paint on the front fenders & radiator support so I can put the dog box back together & rewire the engine bay. Getting painfully close to making some noise!