BLIZZO Posted June 19, 2021 Author Share Posted June 19, 2021 4 minutes ago, johnnyfive said: I really need to sort out getting mine in the system before its too difficult later this year. Just so goddamn time and money poor these days. I wholeheartedly endorse your activities sell xr100 to fund compliance! def worth getting done. Mitch is in the process of getting his 1990 250r complied. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post BLIZZO Posted June 21, 2021 Author Popular Post Share Posted June 21, 2021 Hmmm i'm a bad man. A good deal popped up on a 1982 XT250 recently which I snapped up. Even has current reg and wof. Comes with a few new parts to give it a bit of a tidy up, get spic and span. Might do a few rides on it then take some trendy photos and sell it to some hipster to fund a bunch of expensive BMW parts I need to buy. 9 2 Quote Link to comment Share on other sites More sharing options...
anglia4 Posted June 21, 2021 Share Posted June 21, 2021 @BLIZZO I could 100% be that hipster FYI if the deal was right While all your goons foam over Hondas, I'm a Yamaha man, and that tickles my pickle. Quote Link to comment Share on other sites More sharing options...
TimShadboltfan27 Posted June 22, 2021 Share Posted June 22, 2021 2 hours ago, anglia4 said: @BLIZZO I could 100% be that hipster FYI if the deal was right While all your goons foam over Hondas, I'm a Yamaha man, and that tickles my pickle. Yes! we need more recruits in our Medium sized ADV Club PPSC spinoff series 1 Quote Link to comment Share on other sites More sharing options...
peteretep Posted June 22, 2021 Share Posted June 22, 2021 so jelly of xt250, dont often turn up in good nick/good price these days Quote Link to comment Share on other sites More sharing options...
Popular Post BLIZZO Posted September 24, 2021 Author Popular Post Share Posted September 24, 2021 Have been a bit absent with updates here. Havnt done a lot in the shed since a pretty major back malfunction which looks like its going to require surgery to fix, i got a wee but done before it got quite bad so will fire a few updates through. For those of you interested in the XT250 soz but i had to PPSC it, ended up selling for a moonbeamish $5,000 pretty easily so was quite happy with that. I stripped it back to the frame and painted it, zinc plated just about every bolt and slapped all the NOS bits on that it came with, looked a million bucks in the end, probs why it sold for a million bucks. As far as the XR250 goes a had a bunch of parts turn up. this extra ginormous box turned up from the U S of A, it was 3/4 full of packaging and 1/4 full of this Clarke 16L tank. Pretty stocked with the quality. Also had a full decal kit turn up for once shes all back together. Blue '86 design seat cover also turned up from the states. Its since been shipped off to @64valiantfor some foam repairs and fitting to the seat. Shmancy Wiseco big bore forged piston turned up, this is a 77mm bore piston which gives a displacement of 277cc with every so slightly higher CR. it also came with a full top end gasket and seal set which was handy. Since im want to make it look all pretty tidy I decided to get the top end vapour blasted. im going to cerakote the engine side covers and couldnt be arsed spliting the bottom end so the cases can just get the scotchbrite treatment. Top end stripped and ready for blasting: Vapour blasting does such a lush job, its crazy how much it peens and seals up the alloy. After blasting I ran everything through @Flauskis ultrasonic cleaner. Its crazy how many beads still come out of thread holes and stuff when you think you already have it clean as, def a must do for any engine blasting I think. with the blasting all done I sent the head and cylinder off to my machinist and he did a bunch of stuff, started with boring the cylinder to the wiseco specs and doing ring gaps for me etc. then he surfaced the head, did a 3 way valve job on the valves and lapped them all in, the decided to tickle up the ports with the die grinder. Didnt get many photos soz but im tickle pink with the work. I've now put the engine back together, healthy doses of assembly lube, blue loctite and correct torque settings. man i love fresh zinc plated fasteners. Next up is restoring the plastics. this is a painstaking task and there is no easy way to cheat it, especially with white plastics. I tried cheating with the DA sander but it just doesnt do the job like straight line hand wet and dry sanding. Process to fix fucked plastics was razorblade - 320g - 600g- 800g - 1200g - 1600g- 2000g wet and dry. Then hit it with some cut on a medium speed drill wit polishing pad, wipe off cut then hit with a high speed fine polishing pad. just be careful to not hold for too long in one spot and burn though, I had to start from scratch in a few spots. Rear fender came up good enough, not amazing but will do. Sitting on the bike with new tool bag and rear indicators Next job is to do a DIY cerakote of the side covers and get the engine completely back together, then onto the rest of the plastics. 18 1 Quote Link to comment Share on other sites More sharing options...
anglia4 Posted September 26, 2021 Share Posted September 26, 2021 I saw the XT come up on trade me. It looked great! Not surprised at all that it sold for that much! Quote Link to comment Share on other sites More sharing options...
Popular Post BLIZZO Posted October 13, 2021 Author Popular Post Share Posted October 13, 2021 Wife was away for the week so I took the opportunity to do some Cerakote on the engine side covers. first time having a crack at this, its pretty cool stuff. Kinda like a liquid powdercoat, just as strong but thinner. Process was sandblast the cases, ultrasonic cleaned them in simplegreen, then soaked in an acetone bath. Cook them in the oven to gas them off then spray with the Cerakote. I got a small HVLP detail gun to do the spraying which made it super easy. After spraying its straight into the oven at 125c for 2 hours to bake. Pretty simple and really looks the part. The burnt bronze is a very close match to the honda bronze / gold. 13 Quote Link to comment Share on other sites More sharing options...
Popular Post BLIZZO Posted November 3, 2021 Author Popular Post Share Posted November 3, 2021 XR's all finished now, thanks to @64valiantfor repairing the seat foam and recovering my seat. Took it for a blat last weekend and it was way rich so have since down jetted closer to stock, will take for another hoon this week and see how i go, hopefully it flys through a wof as we are off on 5 days of riding next week. Pic dump from last weekends trip in one of the larger forests I manage, Lismore Forest. 18 Quote Link to comment Share on other sites More sharing options...
Goat Posted November 3, 2021 Share Posted November 3, 2021 Divine Whats that big black lever attached to the engine slightly to the left of the center of the last pic? Its hard to tell what it is. 1 1 Quote Link to comment Share on other sites More sharing options...
Chris.QCR Posted November 3, 2021 Share Posted November 3, 2021 Another outstanding steed from the Garage of Blizzo ! Nice work as always brother. Enjoy those 5 days if bliss mate 2 Quote Link to comment Share on other sites More sharing options...
AllTorque Posted November 3, 2021 Share Posted November 3, 2021 Looking sweet. Don’t get it dirty! Quote Link to comment Share on other sites More sharing options...
BLIZZO Posted November 3, 2021 Author Share Posted November 3, 2021 1 hour ago, Goat said: Divine Whats that big black lever attached to the engine slightly to the left of the center of the last pic? Its hard to tell what it is. Unsure if goat sarcasm re the kickstart or if you are talking about something else haha. Honda did make the indentification of the kick starter rather clear to avoid any confusion 3 Quote Link to comment Share on other sites More sharing options...
cletus Posted November 3, 2021 Share Posted November 3, 2021 That looks too nice for using in the dirt now haha My dad used to manage a couple of forests in Auckland for Carter holt , dirt bikes were always verboten in the forest, dad used to chase the locals out of there fairly regularly, until there was a mishap, I think he got charged with dangerous driving or something once 1 Quote Link to comment Share on other sites More sharing options...
Goat Posted November 3, 2021 Share Posted November 3, 2021 14 hours ago, BLIZZO said: Unsure if goat sarcasm re the kickstart or if you are talking about something else haha. Honda did make the indentification of the kick starter rather clear to avoid any confusion Was being silly. I just love how it is cast into them. So rad. 1 Quote Link to comment Share on other sites More sharing options...
sheepers Posted November 4, 2021 Share Posted November 4, 2021 love your work mate, great job! 1 Quote Link to comment Share on other sites More sharing options...
Popular Post BLIZZO Posted December 19, 2021 Author Popular Post Share Posted December 19, 2021 When my boy pete, not @V8Pete, my actual son Pete was 1ish @UTERUS had a z50R for sale. i actually tried to buy it but he pipped me at the post, then sold it to me once he got bored. I Grabbed it and stashed it away thinking it would be awesome to do up when Pete was older. not long after getting it i stripped it right down and stashed it in boxes so pete wouldn't accidentally see it. i kind of forgot about it for a while and decided i would wait until he got quite good on a push bike before giving it to him. Bike when i first got it - The bike didnt run too good, was lacking in compression and just all round love. it had been rattle canned an incorrect shade of red and was pretty tatty. its an 1982 Z50R. There must have been a big shipment of Z50s into the country in 82, as it seems most of the ones floating around these days are '82s. The first bits i had done was have the rims and hubs blasted and powdercoated as i was going another bike at the time, might have been the XR in the background of that pic. Then it sat stagnant for like 3 years + During the first lockdown I stripped the engine completely so i could have the cases and ally bits vapour blasted. Discovered the gear shift shaft was bent so got a NOS one from Malcolm at Anaconda along with a new set of Valves as the ones in it were pretty worn and sharp. i love vapour blasting it just comes up so good. I gave the head to Mike at B&H engine services and he cut the seats for the new valves and did a bit of port work for the lols, refaced the gasket surfaces. I grabbed a new cylinder and rings and reused the stock piston as it was fine. Biffed the engine back together a few weeks ago The OG side cover had chunks missing out of it and was tatty. i CBF restoring it so grabbed a genuine one off ebay for $100 The seat base needed some rust repairs and had a local upholstery do a patch up job on the buggered foam, will get a new foam for it at some stage as its still not quite right but i knew that was going to be the case. I sent off all the hardware and had it re zinc coated which makes a huge difference and is super cheap. $40 for the entire bike worth, then sent off all the parts for sandblasting included a new aliexpress fuel tank. Once these came back from blasting I dropped everything off at elite powdercoating here in palmy. The factory honda color is "Blaze red" which is an orangey red. The guys at Elite are awesome and matched it to a red that the use a lot on Go karts as it was apparently the color Ayrton Senna had on his Karts or something, anyway it was a perfect match. Then came the hard bit a couple of weeks ago of assembling it without the wee fella noticing. i had it on a bench in the shed and would work on it in the evenings. stored with a blanked over it for the rest of the time. The mrs would deadbolt me in the garage while I was working on it so Pete wouldnt come wandering in. 13 3 1 Quote Link to comment Share on other sites More sharing options...
Popular Post BLIZZO Posted December 19, 2021 Author Popular Post Share Posted December 19, 2021 And now, bar the stickers which hopefully arrive in time for Christmas from doozi its all finished. runs mint. Santa can piss off if he thinks he's taking credit for this, this is a chrissy present from Mum and Dad. 22 4 Quote Link to comment Share on other sites More sharing options...
sheepers Posted December 19, 2021 Share Posted December 19, 2021 i got one of those for Christmas when i was 7 years old. used to hoon it everywhere until i got told off by the local cop (officer Mallard caught me in his grey mark 3 Cortina with a single blue light on the roof, remember it like it was yesterday) then i was a bit more cautious of hooning it around the foot paths. 6 3 Quote Link to comment Share on other sites More sharing options...
HighLUX Posted December 20, 2021 Share Posted December 20, 2021 Vid of it wrapped up and idling away choofing at the wrapping paper please 5 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.