Seedy Al Posted July 27, 2011 Author Share Posted July 27, 2011 RE: your crab cleaninghit them shits with a soda blaster, voldo did this and make them look new/not too bling bling Did he send that out or do it him self?? Wondering if you need to buy special stuff to use in a sand blasting booth. lee has one here, I just need to hook up my comprsssor finally Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 27, 2011 Share Posted July 27, 2011 Nah bro. Home made soda blaster (dead fucking serious)... I'll try find the thing... EDIT: BOOM, BITCH! http://www.aircooledtech.com/tools-on-t ... a_blaster/ Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted July 27, 2011 Share Posted July 27, 2011 baking soda from countdown in a riggady home made blaster constisting of an air duster and a straw Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted July 27, 2011 Author Share Posted July 27, 2011 ok I'm totally hugging you guys right now Quote Link to comment Share on other sites More sharing options...
tortron Posted July 29, 2011 Share Posted July 29, 2011 pretty sure it was in this thread red wrinkle paint is at repco, its about $7 more than black Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted July 30, 2011 Author Share Posted July 30, 2011 Yeah man, crazy, I know you used to not be able to buy it Now find me purple and I will be happy haha Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 30, 2011 Share Posted July 30, 2011 Paint in wrinkle then dust over the top in high temp purple. Derp. Quote Link to comment Share on other sites More sharing options...
DavidTheCreator Posted July 30, 2011 Share Posted July 30, 2011 im making a soda blaster thingy as we speaking, fucking awesome website Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted July 30, 2011 Author Share Posted July 30, 2011 Paint in wrinkle then dust over the top in high temp purple. Derp. I dont like you attiude sun shine Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted July 30, 2011 Share Posted July 30, 2011 Now find me purple and I will be happy haha oh FUUUUU! gimmie a few days to work on this recipe i need this in my life Quote Link to comment Share on other sites More sharing options...
mikey Posted August 1, 2011 Share Posted August 1, 2011 And now I'm starting to worry I'm going to run out of time darn it. Stinkhole! You have to get it running for Taupo so we can start our Zed gang. Having said that I'm getting a bit nervous that I'm not gonna make it either. Waiting on head (at machine shop, should be fine) and head studs (from the states could take a couple of weeks) and I've got zero free weekends. Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted August 2, 2011 Author Share Posted August 2, 2011 currently looking into rebuilding new block to factory l28 spec. Will see what ans out! Quote Link to comment Share on other sites More sharing options...
Steelies Posted August 2, 2011 Share Posted August 2, 2011 202 Quote Link to comment Share on other sites More sharing options...
Positive Ape Posted August 2, 2011 Share Posted August 2, 2011 word. 2ZZ? Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted August 2, 2011 Share Posted August 2, 2011 Buy some good pistons Alan. Don't be all like "Oh, I'm short on time, I need my car skid worthy now!" Rome wasn't built in a day. Get the bestest slugs you can find, and they'll pay dividends for years to come. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted August 2, 2011 Share Posted August 2, 2011 hey alan! your valve seats apear to be not so flush with yen port walls also on a more important note, spray 2 good coats of LACQUER primer to your single cam cover leave for 3 minutes at room temperature (for best results spray items on the kitchen table etc) then spray 3 coats of purple ENAMEL leave for 2 minutes at room temperature place into a pre-heated oven at 60'c bake until crisp and golden and enjoy with wrinkle cut fries Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted August 2, 2011 Author Share Posted August 2, 2011 mean! nothing like wrinkle finish paint reaction! Quote Link to comment Share on other sites More sharing options...
ANT Posted August 2, 2011 Share Posted August 2, 2011 Swoon. Track videos are a must imo. Quote Link to comment Share on other sites More sharing options...
anglia4 Posted August 2, 2011 Share Posted August 2, 2011 argh!!! 240's look so sweet! Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted August 2, 2011 Share Posted August 2, 2011 wrinkle paint is apparently both paints in one can Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.