BlownCorona Posted July 12, 2021 Share Posted July 12, 2021 FYI there are such things as engine mounts with offset bolts that would make your current setup bolt in. when we put the sr20det in dads s11, we had i think 35mm difference between mount and crossmember, had a google and came up with a volvo mount that had the same offset and everything bolted in sweet with off the shelf parts. 1 Quote Link to comment Share on other sites More sharing options...
Valiant Posted July 16, 2021 Share Posted July 16, 2021 Could you use an easier to find front wheel drive manifold? Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted July 17, 2021 Share Posted July 17, 2021 On 17/07/2021 at 00:12, Valiant said: Could you use an easier to find front wheel drive manifold? This ae92 4agze fwd manifold listed on trademe looks like the flange points to the sump too much and also to engine mount Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted July 17, 2021 Share Posted July 17, 2021 On 13/07/2021 at 08:46, BlownCorona said: FYI there are such things as engine mounts with offset bolts that would make your current setup bolt in. when we put the sr20det in dads s11, we had i think 35mm difference between mount and crossmember, had a google and came up with a volvo mount that had the same offset and everything bolted in sweet with off the shelf parts. Found these vovlo kelpro ones listed on their catalog with a price of $172.99 each via supercheap It looks like they are too thick for my application and probably more cost effective to just make more engine mounts to utilize a normal rubber 1 Quote Link to comment Share on other sites More sharing options...
Valiant Posted July 17, 2021 Share Posted July 17, 2021 Scumbag / pro tip. You can mig steel to cast iron. I'd be tempted to cut that manifold above the boss for the heat shield and weld on my own flange then connect to my existing exhaust. It's a low tech solution but it would get you on the road. 1 Quote Link to comment Share on other sites More sharing options...
Sambo Posted July 18, 2021 Share Posted July 18, 2021 It is common for the coby headers to be far too close to the starter. Factory manifold is close, but not that close. The factory RWD starters have a heatshield on them, I'm not sure if FWD ones do. 1 Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted July 20, 2021 Share Posted July 20, 2021 On 18/07/2021 at 07:49, dspec_tt131 said: Found these vovlo kelpro ones listed on their catalog with a price of $172.99 each via supercheap It looks like they are too thick for my application and probably more cost effective to just make more engine mounts to utilize a normal rubber those are probably what we got, except we ordered from rock auto and they cost about $30 edit - they were volvo 240 2 1 Quote Link to comment Share on other sites More sharing options...
cletus Posted July 29, 2021 Share Posted July 29, 2021 Driveshaft - russell at driveshaft specialists, andromeda cres east tamaki Hes a good sort 3 Quote Link to comment Share on other sites More sharing options...
Snoozin Posted July 29, 2021 Share Posted July 29, 2021 Damn I'm all full of regrets for selling my BR-X now. Tasty as. 3 Quote Link to comment Share on other sites More sharing options...
Nominal Posted July 29, 2021 Share Posted July 29, 2021 The fuel pump bypass check valve is probably to allow you to use the electric pump in conjunction with a mechanical pump on the engine (usual USA V8 style) I run mine without that, just a filter directly before the pump. I took off the mechanical pump. Quote Link to comment Share on other sites More sharing options...
Brock-Lee Posted July 29, 2021 Share Posted July 29, 2021 Oh lordy those wheels look amazing!! Such a cool project dude. Also don't give Robbie credit for those centre caps. He is just the man lucky enough for me to lend them to him. I didn't realise you were getting the replacement caps CNC machined and thought you were getting them 3d printed. Please let me know costs involved to make 5 of them and I will pay you 1/5th for my single one, otherwise the cost of borrowing one to reverse engineer is far too high. 2 1 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted July 29, 2021 Share Posted July 29, 2021 2 hours ago, Snoozin said: Damn I'm all full of regrets for selling my BR-X now. Tasty as. Test fits are definitely welcome, would look awesome on your red machine Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted July 29, 2021 Share Posted July 29, 2021 17 minutes ago, Brock-Lee said: Oh lordy those wheels look amazing!! Such a cool project dude. Also don't give Robbie credit for those centre caps. He is just the man lucky enough for me to lend them to him. I didn't realise you were getting the replacement caps CNC machined and thought you were getting them 3d printed. Please let me know costs involved to make 5 of them and I will pay you 1/5th for my single one, otherwise the cost of borrowing one to reverse engineer is far too high. I'm happy to wear the costs as I would have had to buy another whole wheel with centrecap from YAJ to get one to copy so it's a small price to pay. 3d printing was twice the price of cnc machining believe it or not. 1 Quote Link to comment Share on other sites More sharing options...
Brock-Lee Posted July 29, 2021 Share Posted July 29, 2021 2 hours ago, Snoozin said: Damn I'm all full of regrets for selling my BR-X now. Tasty as. Thanks for that btw. 1 minute ago, dspec_tt131 said: I'm happy to wear the costs as I would have had to buy another whole wheel with centrecap from YAJ to get one to copy so it's a small price to pay. 3d printing was twice the price of cnc machining believe it or not. Also naaaah, I will just find your house and throw a random amount of cash at you if you don't let me help out. It shouldn't cost you anything to borrow a cap that was sitting in a shed not being used. Wild that 3d printing was so spendy! The teaser shot Robbo sent me the other day of caps looks so gosh darn cool. Will the slider door clear those rears? Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted July 29, 2021 Share Posted July 29, 2021 Did a trial fit of a 7.5 a type which has the same wheel bolt face to outer lip dimension as the wider pair 7 2 Quote Link to comment Share on other sites More sharing options...
Brock-Lee Posted August 4, 2021 Share Posted August 4, 2021 Can you shorten existing ones into a new/exisitng collector on the 45°? Shouldnt need the car to do that and easier to weld into a collector/get a slip fit collector and let it seal itself Quote Link to comment Share on other sites More sharing options...
HighLUX Posted August 13, 2021 Share Posted August 13, 2021 Man I cant wait for this to be running and a vid of doorts from below your butt 2 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted August 19, 2021 Share Posted August 19, 2021 Someone on here know if my 5k would have had externally regulated alternator or internal? Tried testing the 3 pin plug before putting 4age plug on and not getting the results listed for 4age alternator Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted August 19, 2021 Share Posted August 19, 2021 Picked up the IG pin in correct place but no voltage on the S, and the L wire is a heavy duty cable thicker than rest that goes to a small box before going to battery Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted August 19, 2021 Share Posted August 19, 2021 Put 12v to the L wire with key on and it's flicked off battery light so looks like I'm good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.