mikuni

Sheepers' RA28 Celica

Recommended Posts

oh man i can totally relate to the back issues i have a herniated L5-S1 disk , causes me nothing but pain. some times it livable but if i pinch the nerve cluster i'm fucked for months!  

i need to find the motivation to get work on mine too, its been moved a few times, set up in a new shed. but i just haven't touched it in years . i cant even remember what i was doing on it last time. my build thread is lost in oldschool somewhere. probably gone its been so long 

so like ah , do you have any spare ?, like motivation  , where do you find it ? is it expensive ? how much for a gram ?? 


looking like a cool rebuild, are you going to do any other head work ?   how many limbs were the cams ? if you don't mind me asking 

 

Share this post


Link to post
Share on other sites

injector rail looks good mate, hope the recovery is going well could imagine it would be rather frustrating at times! 

Share this post


Link to post
Share on other sites

Sterling work! They're not a cheap engine to tinker with, as my brother is finding out, he's building another engine for his Superstock

Share this post


Link to post
Share on other sites
On 18/07/2019 at 21:54, ta63-1uzze said:

oh man i can totally relate to the back issues i have a herniated L5-S1 disk , causes me nothing but pain. some times it livable but if i pinch the nerve cluster i'm fucked for months!  

i need to find the motivation to get work on mine too, its been moved a few times, set up in a new shed. but i just haven't touched it in years . i cant even remember what i was doing on it last time. my build thread is lost in oldschool somewhere. probably gone its been so long 

so like ah , do you have any spare ?, like motivation  , where do you find it ? is it expensive ? how much for a gram ?? 


looking like a cool rebuild, are you going to do any other head work ?   how many limbs were the cams ? if you don't mind me asking 

 

Get your back operated on. Get it fixed. 

Don't fuck around waiting for it to heal because it won't.  Get it fixed. 

You'll find your motivation right after the surgery,  I can promise you that. 

As for the cams,  I bought them years ago.  I think they were about 1200$ but I could be wrong.  I got them from kelford and whatever they list the price as is what I probably paid

Share this post


Link to post
Share on other sites

thanks man.

its 2mm sheet that i used.

i welded both the inside and the outside so i could make a nice rad on the corner.

  • Like 1

Share this post


Link to post
Share on other sites

Nice. How did you finish the flat surfaces? They look sandblasted? Whenever I try and buff aluminium (to hide scratches from welding prep) I never seem to be able to get a uniform finish. Was making some brackets yesterday that needed that treatment... 

Share this post


Link to post
Share on other sites

i finished them with my DA sander.

first i grind the welds back to almost flat with the flap wheel on the grinder.

80 grit on the DA to get the grinding marks out

then 150 grit on the DA sander, then scotch brite on the DA sander.

comes up mint.

i have 150mm,  75mm and 50mm DA they are absolutely the best for finishing shit like this.

  • Like 1

Share this post


Link to post
Share on other sites

Ah yeap, might give it a crack with my multitool then (since I don't have an orbital sander). Previously I've just used the flapper disc which is OK but always leaves the surface rougher than I'd like and the 'grain' ends up messed up when you have to come at the workpiece from different directions 

Share this post


Link to post
Share on other sites

Nice job on the power steering rebuild and all the other work of course

good quality as always

have also done a few power steering rebuilds myself 

but definitely not to the precision as you have normally i just wet and dry sandpaper the plates and rotor if it needs it then reassemble it with some rubber grease to help with the first time it runs.

mine were never noisey though just leaked.

but will use your precision next time i do one though 

hope your back is healing up good 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.