ThePog Posted March 8, 2023 Share Posted March 8, 2023 I need a geared 12v motor with a low output speed and reasonable torque. My first thought was a windscreen wiper motor with a worm drive but i might need more than that and probably lower speed. Can anyone think of something else to do the job, ie cheap, grunty, common as muck etc TIA. Quote Link to comment Share on other sites More sharing options...
datlow Posted March 8, 2023 Share Posted March 8, 2023 12v winch... I saw this listing you may be interested in: 12V WINCH 2000Lb Self Recovery & Remote https://www.trademe.co.nz/4023123980 Quote Link to comment Share on other sites More sharing options...
ThePog Posted March 8, 2023 Author Share Posted March 8, 2023 Just now, datlow said: 12v winch... Hmm that is a good possibility, maybe overkill tho. I shall look at wee ones. Good Quote Link to comment Share on other sites More sharing options...
ThePog Posted March 8, 2023 Author Share Posted March 8, 2023 Hmm atv winches Quote Link to comment Share on other sites More sharing options...
UTERUS Posted March 8, 2023 Share Posted March 8, 2023 I've got a few ideas, depending on what you're trying to do and how much torque you need and power available to drive the motor. But yea, keen to know. Or PM if you want to keep it secret Quote Link to comment Share on other sites More sharing options...
mjrstar Posted March 8, 2023 Share Posted March 8, 2023 What sort of duty, would a Battery drill or impact driver be an option? Quote Link to comment Share on other sites More sharing options...
Nominal Posted March 8, 2023 Share Posted March 8, 2023 Have this in the 'round tuit' pile. Will work on 12V I think. Plan is to use it on a bead roller. I think it's from an electric wheelchair or similar. Quote Link to comment Share on other sites More sharing options...
ThePog Posted March 8, 2023 Author Share Posted March 8, 2023 45 minutes ago, UTERUS said: I've got a few ideas, depending on what you're trying to do and how much torque you need and power available to drive the motor. But yea, keen to know. Or PM if you want to keep it secret It is a lifting roof caravan i am building, the lift is done with timing belts for reasons. I have something like 60mm gear/shaft system that drives everything. I worked out that I need about 50Nm of torque at 1:1 drive to lift everything comfortably. I also needs to be running pretty slow, like 10rpm. I was thinking about doing a build thread for it as it has some interesting features. I just hit buy now on a cheapy atv winch which will either do it or give me context for getting something better. 39 minutes ago, mjrstar said: What sort of duty, would a Battery drill or impact driver be an option? This is the backup system. 16 minutes ago, Nominal said: Have this in the 'round tuit' pile. Will work on 12V I think. Plan is to use it on a bead roller. I think it's from an electric wheelchair or similar. Yea I looked at those, probably too fast. 2 Quote Link to comment Share on other sites More sharing options...
tortron Posted March 8, 2023 Share Posted March 8, 2023 Hospital bed lift motor? Quote Link to comment Share on other sites More sharing options...
Transom Posted March 8, 2023 Share Posted March 8, 2023 ATV winch cos remote controls I have one which I am looking at using to power a lifter for the spa pool cover Quote Link to comment Share on other sites More sharing options...
smokin'joe Posted March 8, 2023 Share Posted March 8, 2023 34 minutes ago, tortron said: Hospital bed lift motor? don't they use linear actuators to raise / lower ? Quote Link to comment Share on other sites More sharing options...
R3spct Posted March 8, 2023 Share Posted March 8, 2023 Ive got a heap of DC garage door motor electric motors and gearbox's, 24v, ive put them on a powersupply and turned the voltage right down to under 5v and the torque is quite good still. I wouldnt trust the gearbox for lifting and holding anything not counterballanced tho, they only have a plastic gear. In auckland tho... so..... Quote Link to comment Share on other sites More sharing options...
ThePog Posted March 10, 2023 Author Share Posted March 10, 2023 On 08/03/2023 at 15:49, datlow said: 12v winch... I saw this listing you may be interested in: 12V WINCH 2000Lb Self Recovery & Remote https://www.trademe.co.nz/4023123980 A wee boy arrived today, its actually perfect, pretty grunty, the right revs, it can be manually disconnected, already has up and down controls... Chur for that. 1 Quote Link to comment Share on other sites More sharing options...
ahebron Posted April 15, 2023 Share Posted April 15, 2023 If the winch doesn't work out as mjrstar mentioned a battery driver could do the job. Have a look at Topmaq Nordic 600Nm nut destroyer 5 year warranty and commercial/industrial spec Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted May 16, 2023 Share Posted May 16, 2023 Looks like you are sorted but years ago I build a guy a bead roller (fyi it was fuckin badass, huge laser cut side plates spaced apart with heavy steel spacers) He had me adapt it to work with a motor and gear reduction unit he found new on ebay which was for positioning either telescopes or satellite dishes (something that looks at the sky lol). Thought it was a cool solution. Quote Link to comment Share on other sites More sharing options...
ThePog Posted May 16, 2023 Author Share Posted May 16, 2023 Ye prety much, for now anyway... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.