Mike Simmonds Posted April 8, 2019 Share Posted April 8, 2019 I have been looking out for some 17 inch head 40's for a while and managed to pick some up today thanks to a mate that spotted some at a wrecker. Problem is the chrome is in average condition. Re plating seems to be huge money. Only other option I was thinking was to remove the chrome then polish and clear coat. Easy chome paint on the net seems to give good results, anyone tryed it on wheels? Does it last? Any other ideas? Cheers Quote Link to comment Share on other sites More sharing options...
piazzanoob Posted April 8, 2019 Share Posted April 8, 2019 wouldn't bother with spray on chrome with something like wheels probably small things that are not seen all the time i guess would be fine. would just end up in disappointment or redoing in 12 months personally would just get it back to bare alloy then just polish them. And clearing them can turn yellow or dull or crazy cracking. this is if doing at home with a spray can etc. if wanting to do yourself just paint strip them and polish then re polish when needed. but also a good polish and good paint shop could clear them and they could last depending on conditions 1 Quote Link to comment Share on other sites More sharing options...
Mr Vapour Posted April 8, 2019 Share Posted April 8, 2019 your problem is going to be removing the chrome. get hold of a chrome place and ask if they can strip them for you. then polish or paint. Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted April 9, 2019 Share Posted April 9, 2019 VHT Bro chrome looks lush when first done. But it never seems to go properly hard. I'd love to try a two pack enamel clear over the top and see if it helps keep it good. Quote Link to comment Share on other sites More sharing options...
Mike Simmonds Posted April 9, 2019 Author Share Posted April 9, 2019 This was the stuff I was looking at, unsure how well it wears, though would be reasonably painless to re do every 12-18months if you had to I guess, possibly similar maintenance if i was to polish and clear coat anyway 4 Quote Link to comment Share on other sites More sharing options...
Mike Simmonds Posted April 9, 2019 Author Share Posted April 9, 2019 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted April 9, 2019 Share Posted April 9, 2019 Sure they aren't just polished and clear coated ? Quote Link to comment Share on other sites More sharing options...
Mike Simmonds Posted April 9, 2019 Author Share Posted April 9, 2019 The chrome is peeling Quote Link to comment Share on other sites More sharing options...
a.craw4d Posted April 10, 2019 Share Posted April 10, 2019 Don't know about what's available near you but my work has a special lathe set up for machining the face of wheels. On something like those I'd get blasted, a coat of black paint down between the spokes ( don't worry about getting paint on the faces, it gets machined off), get the faces machined and then a good clear coat on top. 2 Quote Link to comment Share on other sites More sharing options...
Bling Posted April 12, 2019 Share Posted April 12, 2019 On 09/04/2019 at 21:52, Mike Simmonds said: This was the stuff I was looking at, unsure how well it wears, though would be reasonably painless to re do every 12-18months if you had to I guess, possibly similar maintenance if i was to polish and clear coat anyway Shit me, that is impressive. 1 Quote Link to comment Share on other sites More sharing options...
yetchh Posted April 12, 2019 Share Posted April 12, 2019 6 hours ago, Bling said: Shit me, that is impressive. I reckon.. Good to know there's a fairly good alternative to chroming, especially on average rusty bumpers.. Lacks the depth of chrome tho, looks a bit more like polished alloy.. Still, I'd tap it Quote Link to comment Share on other sites More sharing options...
Muncie Posted April 26, 2019 Share Posted April 26, 2019 You could get them ceramic chromed by HPC or Pro Coat finish is very similar to your spray chrome above but is really durable. Quote Link to comment Share on other sites More sharing options...
shizzl Posted April 27, 2019 Share Posted April 27, 2019 +1 for HPC, I had all of my bolt ons on the pinto turbo done, and my entire 12a was coated aswell, very hard wearing, good for heat etc too Quote Link to comment Share on other sites More sharing options...
ul9601 Posted April 27, 2019 Share Posted April 27, 2019 whatever it is you are chroming (or any finish), it's gonna look shit if you don't polish to hell, chrome is the easy part. Conversely, if you polish well enough, it'll look like chrome even if it doesn't have anything on (if you have good eyes, you can see the kind of blueish finish, which would be chrome and yellow tinge which comes with nickel) - of course the shine won't last without plating or clear coat finish... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.