mfordy Posted May 19, 2014 Share Posted May 19, 2014 Looking good, nothing like a bit of tripoding on turn 3 You obviously sorted out ya problem - distributor playing up? What sort of lap times did you end up with? Quote Link to comment Share on other sites More sharing options...
shaneo Posted May 19, 2014 Author Share Posted May 19, 2014 Looking good, nothing like a bit of tripoding on turn 3 You obviously sorted out ya problem - distributor playing up? What sort of lap times did you end up with? Hard to tell lap times as didnt have a timer with me defently better than my last sesion of 1:30.5 next time out I will get a new app for my phone. Yeah the distributor spat the rotor off the top and that was the reason. Quote Link to comment Share on other sites More sharing options...
Shakotom Posted June 8, 2014 Share Posted June 8, 2014 I was at that track day too, saw your car from a distance now come to think of it Quote Link to comment Share on other sites More sharing options...
shaneo Posted June 8, 2014 Author Share Posted June 8, 2014 I was at that track day too, saw your car from a distance now come to think of it How did your car go? Seen you out there but was fairly busy on the day a couple of fix jobs and it was was running double sessions Quote Link to comment Share on other sites More sharing options...
M_C Posted June 28, 2014 Share Posted June 28, 2014 Specs on horn please! Where did you get it? Price? Quote Link to comment Share on other sites More sharing options...
nicklm Posted July 5, 2014 Share Posted July 5, 2014 I'm so jealous of those mesh wheels, your refurb work on em looks well done too Quote Link to comment Share on other sites More sharing options...
browndog Posted July 5, 2014 Share Posted July 5, 2014 wheels looking good, but will be fun to mask up! Coffee table, TV on, beer or 2, rolls of masking tape, scalpel and of course wheels. And don't let gf/wife/mum catch you Quote Link to comment Share on other sites More sharing options...
mfordy Posted July 10, 2014 Share Posted July 10, 2014 Ha I feel your pain. Still haven't sorted mine yet either! Quote Link to comment Share on other sites More sharing options...
shaneo Posted July 11, 2014 Author Share Posted July 11, 2014 I'm so jealous of those mesh wheels, your refurb work on em looks well done too They are almost there they are at the paint shop im waiting to get it running so the painter can match the colour to the pin stripe on the car Quote Link to comment Share on other sites More sharing options...
shaneo Posted July 11, 2014 Author Share Posted July 11, 2014 Ha I feel your pain. Still haven't sorted mine yet either! It was running late today but stopped again Quote Link to comment Share on other sites More sharing options...
M_C Posted July 11, 2014 Share Posted July 11, 2014 Nooooooooo, tell us it I not so! Quote Link to comment Share on other sites More sharing options...
mfordy Posted July 25, 2014 Share Posted July 25, 2014 Bob Homewood (Hitech Motorsport) has heaps of experience with side draughts and is setup with a Dynapack chassis dyno. Found some extra hp for me but unfortunately made it near impossible to cold start!... Going back next week to sort out. Hitech aren't cheap dyno charge $250, lambda fitting $20 + labour but they will standby their work. Good luck sorting you're trailer queen. Must be something about them as mine is just as bad Quote Link to comment Share on other sites More sharing options...
Stu Posted July 26, 2014 Share Posted July 26, 2014 Second for Homewood - his sons are pretty clued up too Quote Link to comment Share on other sites More sharing options...
shaneo Posted July 31, 2014 Author Share Posted July 31, 2014 Have just got to collect the jets I need which is loads . Have a gide line of what it should be running now. Have called Hitech but I want to take it down for a chat first. Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted July 31, 2014 Share Posted July 31, 2014 ive got heaps of weber and dellorto jets what are you after Quote Link to comment Share on other sites More sharing options...
shaneo Posted July 31, 2014 Author Share Posted July 31, 2014 ive got heaps of weber and dellorto jets what are you after That would be great let me know what you have and how much you want 45 pump jets x 4 .1 idle holder x 4 200 neddle vaule set x 4 145 Mains x 4 I have been told for the set up I have this will be pretty close so I dont have to do to many runs on the dyno . Better to be well preped and then hope it all works Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted August 4, 2014 Share Posted August 4, 2014 can probly help yo out with the .1 idle jet holders only found 3x .45 pump jets all the other jets are too small sorry but i do have a full set of jet drills from 1 mm to 2.5 mm you can borrow and some donor jets to solder and re drill Quote Link to comment Share on other sites More sharing options...
mfordy Posted December 11, 2014 Share Posted December 11, 2014 Did you end up going to Homewoods for your dyno?. (I guess not as they do supply a printout) Sounds like very similar hp ratings to mine. Good luck tomorrow. Quote Link to comment Share on other sites More sharing options...
Roman Posted December 11, 2014 Share Posted December 11, 2014 We should organise an OS dyno day some time! I think if you can get about 20 people together they can have a dyno day at torque performance or where ever still. I miss the monthly dyno days they used to have, they were genuinely handy. Quote Link to comment Share on other sites More sharing options...
shaneo Posted December 11, 2014 Author Share Posted December 11, 2014 We should organise an OS dyno day some time! I think if you can get about 20 people together they can have a dyno day at torque performance or where ever still. I miss the monthly dyno days they used to have, they were genuinely handy. Yeah sounds like a plan as I need to build a cold air duct as well he said it would be good for 5hp which is free HP . And its strange my engine is built to be high compression but he seemed to think it wasnt so but the parts in it mean it should so it must be the way that I had the cam grind done??? oh well we will see tomorrow how it goes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.