mikuni Posted December 5, 2009 Share Posted December 5, 2009 Agree with above, doesn't even need to be staggered if you only find one size. Satty B bolt ons showing bolts and all are good. edit: above is no longer above, so agree with below Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted December 5, 2009 Share Posted December 5, 2009 anybody know who makes those^ flares, they seem to be much higher quality than the trade me items Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted December 7, 2009 Share Posted December 7, 2009 just found this picture while looking for inparachunz Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted December 9, 2009 Share Posted December 9, 2009 with new irs rear end and the 8.5's on the rear ill be gaining 9inches of wheel base over stock boyah! Quote Link to comment Share on other sites More sharing options...
karmagedon Posted December 30, 2009 Share Posted December 30, 2009 What are you doing with the clay? Just a mock up or smoothing the ports out? Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted December 30, 2009 Share Posted December 30, 2009 was just a rough mock up to see how much wasted space is in there flow bench isnt quite ready yet will sort that out at the weekend Quote Link to comment Share on other sites More sharing options...
kpr Posted January 1, 2010 Share Posted January 1, 2010 lesson #8373: dont use devcon plastic steel putty in the ports. i just finished putting head back on as that stuff was starting to fall out. sweet golfball spec ports now... Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted January 1, 2010 Share Posted January 1, 2010 lesson #8374: use JB weld, its less shit than devcon this guy says so Quote Link to comment Share on other sites More sharing options...
Simon Posted January 1, 2010 Share Posted January 1, 2010 lesson #8374: use JB weld, its less shit than devconthis guy says so Would trust that guy with my life / engine ^ Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted January 1, 2010 Share Posted January 1, 2010 have followed his running in methods since forever so did Suzuki tutor at carter+carters, works mean dyno sheets say so. not so much on 2 stokes but thats probably due to my riding style Quote Link to comment Share on other sites More sharing options...
Simon Posted January 1, 2010 Share Posted January 1, 2010 have followed his running in methods since forever so did Suzuki tutor at carter+carters, works mean dyno sheets say so. not so much on 2 stokes but thats probably due to my riding style Oh great! I have never had the chance to try it but it all makes sense. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted January 1, 2010 Share Posted January 1, 2010 will make a video of lancer break in=tow to secret location, do a skid for 12 miles Quote Link to comment Share on other sites More sharing options...
FuzzayD Posted January 4, 2010 Share Posted January 4, 2010 Yes do that. What dremel attachments did you use for your porting job? Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted January 4, 2010 Share Posted January 4, 2010 most of the material was removed with a die grinder and various burrs and finished off with sanding rolls on the dremmel Quote Link to comment Share on other sites More sharing options...
tortron Posted January 20, 2010 Share Posted January 20, 2010 12.6mm is pretty much a half inch Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted January 20, 2010 Share Posted January 20, 2010 12.6mm is pretty much a half inch have now found some tube for 'crush tube' which i need bolts need to be 10.5mm m10 bolt with an un-threaded section should be perfect Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted January 24, 2010 Share Posted January 24, 2010 so does this mean you are going to turbo it? or is that just your flash new bash guard lol Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted January 24, 2010 Share Posted January 24, 2010 supercharging is on the books after i get bored of dorting aound with open carbs, ill be poking some boost though them compression has already been lowered so im committed now Quote Link to comment Share on other sites More sharing options...
Horse25 Posted January 24, 2010 Share Posted January 24, 2010 hey, cleared out the garage this weekend, threw up a few Fluros, 6x4 tubes, haha, so its already to do your IRS conversion, just need to clear the bench, can have internet access if you wish Quote Link to comment Share on other sites More sharing options...
Beaver Posted January 24, 2010 Share Posted January 24, 2010 you're a sparky a david? roughly how much to chuck some decent lights in a garage? was thinking a couple of those big double fluro ones.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.