pusherman Posted March 22, 2015 Share Posted March 22, 2015 Hey team. Nit strictly old school. But when did chev start running fuel inection on the 350s. I thaught 2001 on but see some pre y2k with ingekshun Ta Quote Link to comment Share on other sites More sharing options...
AllTorque Posted March 22, 2015 Share Posted March 22, 2015 Throttle body injection started in 1987 http://www.ls-guy.com/l05/ 1 Quote Link to comment Share on other sites More sharing options...
AllTorque Posted March 22, 2015 Share Posted March 22, 2015 Vortec multi point injection started in 1996. Vortec is GM's name for their engines that use Port Fuel Injection. Before Vortec was introduced in 1996, GM Trucks used Throttle Body Injection or TBI for fuel delivery. It was basically taking the idea of a Carburetor and adding fuel injectors at the top where the air mixed, so that it was more controllable. This helped to prevent things like vapor lock. However, in 1996 the injectors were moved from the air intake area to directly in the cylinder, GM called it Vortec. There are two versions of Vortec, Sequential Port Fuel Injection and Multi-Port Fuel Injection. The latter is what is used in todays applications. Vortec and other fuel injected engines allow for total computer control of fuel mixture and therefore increase power and theoretically efficiency of an engine. Though from my personal experience I've found that earlier Vortecs engines 1996-1998 were good for power, but slightly worse for mileage compared with TBI 1 Quote Link to comment Share on other sites More sharing options...
Spencer Posted March 22, 2015 Share Posted March 22, 2015 2001+ trucks should be starting to see vortec LS spec engines. The old 350 has been injected since the late 80's as above. Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 22, 2015 Share Posted March 22, 2015 1957 on the Corvette, not a 350 to be sure but it is a small block. 1 Quote Link to comment Share on other sites More sharing options...
Testament Posted March 22, 2015 Share Posted March 22, 2015 That was mech injection on the 283 Quote Link to comment Share on other sites More sharing options...
dr.wylde Posted March 22, 2015 Share Posted March 22, 2015 In the early 80's you had crossfire injection basically a crude as TBI Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted March 22, 2015 Share Posted March 22, 2015 Was the mechanical injection a bag of dicks? Quote Link to comment Share on other sites More sharing options...
Testament Posted March 22, 2015 Share Posted March 22, 2015 no, its just all of the fuel all of the time Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 23, 2015 Share Posted March 23, 2015 283 used Rochester Mechanical Injection in the Corvette, once tuned was reliable and was one of the first production engines to produce 1 hp per cubic inch. This should not be confused with the truly awful Mechanical Injection by Lucas I think used on the Triumph 2500 PI. Quote Link to comment Share on other sites More sharing options...
BLIZZO Posted March 23, 2015 Share Posted March 23, 2015 Hey now now now there is nothing wrong with lucas PI mechanical injection, it's awesome and reliable, people just used to muck with it without knowing what they were doing. There's a reason so many formula 5000s and other race cars used it 2 Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 23, 2015 Share Posted March 23, 2015 Yeah, I have yo agree, it did work on the 5000 cars. You did however leave out a couple of things. Av-gas or methanol was used. They also used a far better fuel pump, it was this which caused most issues with the PI along with owners playing with it. Quote Link to comment Share on other sites More sharing options...
Kiwibirdman Posted March 24, 2015 Share Posted March 24, 2015 I have a 2000 Silverado, it has the 5.3 LS motor. These first appeared with the change in body style in 1999. The earlier trucks had the throttle body injection on the traditional small block 305's and 350's and the Big Block 454's. The TPI injection only appeared on passenger cars, Corvettes, IROC Camaros, Trans AMs and Buick Roadmasters etc. It was a shame the TPI motors never got put in the trucks because they have a torque curve like a 400 Pontiac, all there by 2500 revs and all done by 5000. There was a quote by some racer who said the TPI was the best truck motor Chevrolet never put in a truck. Quote Link to comment Share on other sites More sharing options...
pusherman Posted March 26, 2015 Author Share Posted March 26, 2015 So how do you find it on gas? I understand we are in a modified car forum and if i use the word eco##my i will be beaten with a torque wrench I plan on running it for work doing 300-450km a week. Going on what i read on the net. And the actuall consumption of my van they are the same which makes me wonder exactly how fucked is my 2l madaz bong on van Quote Link to comment Share on other sites More sharing options...
Testament Posted March 26, 2015 Share Posted March 26, 2015 The LS motors can be pretty sweet on Gas for what they are installed in, main thing is the weight of what you are moving around. a bongo van full of junk could be rather heavy and if you are having to stomp that gas pedal to move it all the time the smaller engine will still use alot of gas. Quote Link to comment Share on other sites More sharing options...
kyteler Posted March 26, 2015 Share Posted March 26, 2015 What mileage did we average in the states, Tom? I forget. Wasn't too shabby though. EDIT: Durp, I fuelly'd some of it. 14.4l/100km Average over 7800km, predominantly highway driving. Best of 12.8l/100km 1 Quote Link to comment Share on other sites More sharing options...
Spencer Posted March 26, 2015 Share Posted March 26, 2015 My 2003 GMC does a little better than that on the highway, but we were going 70mph lots of places. Around town it depends how you drive, 18-25l/100km is normal. Chucked mine over the weigh bridge and it's around 2400kg which isn't too bad for extended cab & long tray. Quote Link to comment Share on other sites More sharing options...
kyteler Posted March 26, 2015 Share Posted March 26, 2015 Just looking at fuelly stats. 1500's should be around the 14-15.5l/100 2500's add another few on, 16-18.5l/100 3500's add another few on, 17-19/100 Some were averaging in the low to mid 20's so I guess they're the soccer mom type owners always driving about town. Quote Link to comment Share on other sites More sharing options...
Kiwibirdman Posted March 27, 2015 Share Posted March 27, 2015 Hi Pusherman My truck gets about 14l/100ks driving everywhere. The only mod to the motor is a full twin exhaust from the standard exhaust manifolds. Towing my 17 ft caravan it gets about 20l/100, I don't slow down for hills we sit on the limit the whole way. Towing the caravan with my wifes Grand Vitara , 2.4 manual, got the same economy and a lot less speed up the big hills. If you are thinking about buying one, do it. It is the best vehicle that I have ever owned. It goes well, handles nicely, pedders shocks, 20 inch wheels and a 4/2 lowering kit help. The only issue is I have had is 2 fuel pumps died. Bunce's have them for $800 plus GST. Buying one from Summit racing should be landed for $400. Apart from the pump it is a cheap vehicle to own, all it really needs is maintenance items, brake pads every 50k miles, my first set of tyres lasted about the same. The battery just got replaced, first one after 8 years (marine batteries are the answer). Quote Link to comment Share on other sites More sharing options...
cletus Posted March 27, 2015 Share Posted March 27, 2015 if you are going to drive one for work id get one with the LS engine i know a guy who had the early one with the old style 350/TBI and it used All Of The Fuel, All The Time. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.