kyteler Posted February 22, 2016 Share Posted February 22, 2016 I'd rather those than these: This look would be alright though, I reckon. Could even put some covers on them. Quote Link to comment Share on other sites More sharing options...
kyteler Posted February 22, 2016 Share Posted February 22, 2016 Like so: Quote Link to comment Share on other sites More sharing options...
mjrstar Posted February 22, 2016 Author Share Posted February 22, 2016 Might try and find some rectangle buggers like these.. (not sure how to link pic but there is a ok looking red mx5 with flares, the recessed ones are going to perhaps be hungry on depth http://www.topmiata.com/shop/jass-performance-low-profile-headlights/# Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted February 22, 2016 Share Posted February 22, 2016 https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSCywasxyGmqYJInKJbRC-xrfl70Ct81CL2qOjvXWgktBh50mytrmhqnon0BA Quote Link to comment Share on other sites More sharing options...
kyteler Posted February 22, 2016 Share Posted February 22, 2016 https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSCywasxyGmqYJInKJbRC-xrfl70Ct81CL2qOjvXWgktBh50mytrmhqnon0BA Yuck. 1 Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted February 24, 2016 Share Posted February 24, 2016 The rx7/z31 looking ones that kyteller posted look so sweet, +1 for that Quote Link to comment Share on other sites More sharing options...
mjrstar Posted February 26, 2016 Author Share Posted February 26, 2016 Im sure we all crapped on about headlights 10 or so pages back? Quick helpful service from these guys.. Will be interesting to see if it stops well enough or if a plan 'C' needs to be hatched. Quote Link to comment Share on other sites More sharing options...
tortron Posted February 26, 2016 Share Posted February 26, 2016 you should paint the headlights body colour 1 Quote Link to comment Share on other sites More sharing options...
mjrstar Posted March 28, 2016 Author Share Posted March 28, 2016 Been a bit quiet on the updates.. although some stuff has been happening:  Replaced all vacuum/boost hoses – not sure but looks to be shithouse quality even though it came from a reputable engineering supplies shop in Hamilton it is clearly on crack..   Quite a few to do all up..   Also picked up the new front discs, which had kindly been drilled to suit the required 4x114 stud patten.  Which left us with this:  Some mods happened to the bottom arms as it had a bit too much low (some of you may argue that is a not a thing)   Which has left the ride height looking pretty much like this:  Some more guard and bumper mods will be required as this hub setup does have slightly more track so things are a little hungry for front and rear clearance but should be less brutal than the mods required to fit the 15x8’s on the front of the starlet.. Ride height and alignment, and some new bump steer measurements are on the to-do list, then look at the routing of the brake lines etc.. before the new carbotechs are given the bedding procedure. 1 Quote Link to comment Share on other sites More sharing options...
mjrstar Posted May 7, 2016 Author Share Posted May 7, 2016 Corner weigh session suggests heavy stuff is heavier than light stuff. This is 1/3 tank of fuel. To make me feel better we put my evo on the scales, and managed to bust one of the castors on my jack.. 2 Quote Link to comment Share on other sites More sharing options...
mjrstar Posted May 25, 2016 Author Share Posted May 25, 2016 Progress on the machining for the steering bits. - need to get them plated before fitting. Shims should allow for fine tuning of bump steer.    Also some reduction in progress can be attributed to the sidetrack of new POS track beater.  4 Quote Link to comment Share on other sites More sharing options...
DB8-TypeR Posted May 27, 2016 Share Posted May 27, 2016 No doubt Mr Foote will be in your ear at work about B series Hondas Quote Link to comment Share on other sites More sharing options...
anglia4 Posted May 27, 2016 Share Posted May 27, 2016 Ben? B series Hondas can only be Ben haha I remember him from uni 1 Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted May 22, 2017 Share Posted May 22, 2017 Havnt been on here in ages, gotta say nice work, particularly on the hubs! Any more progress? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.