shaneo Posted November 7, 2013 Author Share Posted November 7, 2013 12-18 degrees though the range but we set it closer to 18 degrees Quote Link to comment Share on other sites More sharing options...
Truenotch Posted November 7, 2013 Share Posted November 7, 2013 Mmm, probably too lean rather than too advanced then. Will be interesting to see what you find when the top comes off! (like it was with your mother). Quote Link to comment Share on other sites More sharing options...
Truenotch Posted December 1, 2013 Share Posted December 1, 2013 Looks pretty melted in #1! Had that valve lost its head? As for the 4AGE throttles, they will match up fine but throw away the standard manifold and make a new one with two flanges and some tube. It's not often you see the standard manifold used in any application apart from a 20valve. This guy has done it with a weber manifold and an adapter: This is how 10-5 did it for his skyline using GTR throttles: Or you could make something a bit like this: Quote Link to comment Share on other sites More sharing options...
shaneo Posted December 4, 2013 Author Share Posted December 4, 2013 I have been looking at some thing like this As I can get it ready to bolt up just computer and fueling and all the other bits 42 mm Quote Link to comment Share on other sites More sharing options...
Truenotch Posted December 5, 2013 Share Posted December 5, 2013 What's the pricing like? Brad did something similar on his dad mobile. 1 Quote Link to comment Share on other sites More sharing options...
shaneo Posted December 5, 2013 Author Share Posted December 5, 2013 very pricey $1200 nz I have just bought these http://www.ebay.com/itm/261338370953?item=261338370953&viewitem=&sspagename=ADME:L:OU:US:1120&vxp=mtr they are off an R1 07 they where cheap but not fully sold yet also been looking at these as well http://www.ebay.com/itm/271296944534?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 this is my most preferred so far just have to get a weber manifold I'm hoping the bike carb setup sells well to help funding Quote Link to comment Share on other sites More sharing options...
pusherman Posted December 26, 2013 Share Posted December 26, 2013 Hey man what dizzy is that you recently got? Im searching for the best direct replacement electronic dizzy Quote Link to comment Share on other sites More sharing options...
shaneo Posted December 27, 2013 Author Share Posted December 27, 2013 I went with a Powerspark high energy dizzy from Ebay not the cheapest by far. but good spark is very important Quote Link to comment Share on other sites More sharing options...
ESKIN8R Posted February 5, 2014 Share Posted February 5, 2014 Hey, see you snapped up some sport seats recently? Got any spare interior stuff? Quote Link to comment Share on other sites More sharing options...
M_C Posted February 13, 2014 Share Posted February 13, 2014 Thats a nice looking present for your birthday... Quote Link to comment Share on other sites More sharing options...
Truenotch Posted February 13, 2014 Share Posted February 13, 2014 Those extractors look great! I hope you aren't planning on running the same carbs again as an interim option to get it going. I reckon they were making it run lean. Quote Link to comment Share on other sites More sharing options...
mfordy Posted February 13, 2014 Share Posted February 13, 2014 Are they 105speed extractors? Look good... Happy birthday by the way. Quote Link to comment Share on other sites More sharing options...
punkoutnz Posted February 13, 2014 Share Posted February 13, 2014 Wanna sell your old extractors? Those new ones look MINT. Definitely a sweet birthday present. Also count as a gift towards your valentine, surely? Quote Link to comment Share on other sites More sharing options...
shaneo Posted February 13, 2014 Author Share Posted February 13, 2014 Those extractors look great! I hope you aren't planning on running the same carbs again as an interim option to get it going. I reckon they were making it run lean. The bike carbs are sold going to run it in on a set side drafts 40s and see what it runs like 1 Quote Link to comment Share on other sites More sharing options...
shaneo Posted February 13, 2014 Author Share Posted February 13, 2014 Wanna sell your old extractors? Those new ones look MINT. Definitely a sweet birthday present. Also count as a gift towards your valentine, surely? Thanks dont know if the old ones are any good they are very thin and have a lot of weld on them to. There no Valentine in those just pocket money bugger Quote Link to comment Share on other sites More sharing options...
shaneo Posted February 13, 2014 Author Share Posted February 13, 2014 Are they 105speed extractors? Look good... Happy birthday by the way. Thanks Yes 105 speed for a car with a battery tray. Got your car running again? Quote Link to comment Share on other sites More sharing options...
shaneo Posted February 13, 2014 Author Share Posted February 13, 2014 Thats a nice looking present for your birthday... They have been sitting in my office since Wednesday. Next tuesday Woolf muffers all booked then Wednesday is start up day Quote Link to comment Share on other sites More sharing options...
punkoutnz Posted February 13, 2014 Share Posted February 13, 2014 Thanks dont know if the old ones are any good they are very thin and have a lot of weld on them to. There no Valentine in those just pocket money bugger I could get a mate of mine to weld/fix bits that need fixing and replace tube if it's cracked. I'm sure anything is better than the factory extractors. Quote Link to comment Share on other sites More sharing options...
punkoutnz Posted February 13, 2014 Share Posted February 13, 2014 They have been sitting in my office since Wednesday. Next tuesday Woolf muffers all booked then Wednesday is start up day Just in time for burger boes Quote Link to comment Share on other sites More sharing options...
shaneo Posted February 14, 2014 Author Share Posted February 14, 2014 Just in time for burger boes Not sure so low on staff at current working loads Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.