tortron

can i interest you in some other worthless shit tho?

i have some period correct indicator/side lamp units if you want em

Spray some brakeklean or ether down the intake and see if it fires? The in tank pump is probably hosed from sitting in varnish

was it this lada that got written off though?

Looking good John, how about that serenity though

like a normal alternator and power steering pump set up then

Connected to my battery

https://www.aliexpress.com/item/4000147039491.html?spm=a2g0o.productlist.0.0.7a70509aHPf9sH&algo_pvid=46c91517-cfce-47de-acc2-7a6f36d6d195&algo_expid=46c91517-cfce-47de-acc2-7a6f36d6d195-1&btsid=0ab50f4415839895165188350e6765&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ cheap as i rock this on adv GN way brighter than the headlight https://www.aliexpress.com/item/32962315704.html?spm=a2g0o.productlist.0.0.7a70509aHPf9sH&algo_pvid=46c91517-cfce-47de-acc2-7a6f36d6d195&algo_expid=46c91517-cfce-47de-acc2-7a6f36d6d195-12&btsid=0ab50f4415839895165188350e6765&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

possibly jap import vs todd motors. There was some just use what parts are available going on at some points too. front end prang likely as well i guess

got one in the morrie as original sidevalve one has come apart at a seam and needs soldering togeather again tbh i have only actually driven a couple km on it but it worked right out of the box and seemed pretty good quality i hear the quality is hit and miss though, so if you get it from somewhere that has an easy return situation you will be ahead of the game *avtually might be an accuspark unit

Woodnt think so

morrie is double that and barely moves on all 4!

surprised it drove on 2 cylinders

standard camshaft? my sidevalve morrie does that, its just the lazy cam grind i think

you could french the tube into the tank also

a nicely carved stick would also look good good enough for the aero industry

flat type oil sight glass? a fuel level thermistor (or two) for half tank, 1/4 tank and a couple of LEDs hidden in the speedo

knock the rivets out of the cross brace and move it a few inches forwards so its not in the way?

https://www.trademe.co.nz/building-renovation/tools/hand-tools/other/listing-2558169722.htm?rsqid=069bf2fecc6f488fa12d1a5ec82cdd9b-023 coil winding machine possible barry thread, but someone seems to need one every so often

Probably the corrugations

plastidip the inside of the cap? would insulate it

My Ute has balloon 15s all round. Had a low pro 14 as a spare. Possibly a case of - it's fine as a spare because it ticks the boxes, but if you out it on the truck and have different ply etc on the same axle then it fails

seems reasonable

im pesting elsewhere and am gutted i cannot attend this as well