d.p.n.s Posted July 7, 2020 Share Posted July 7, 2020 Who would have thought that a car this rusty would have rusty nuts..bolts...and screws.. So far it's been vice grips on all. Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted July 8, 2020 Share Posted July 8, 2020 Are you fixing this too? 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted July 8, 2020 Author Share Posted July 8, 2020 Just now, RUNAMUCK said: Are you fixing this too? Fuck no mate.....its far beyond me. Just wants parts Quote Link to comment Share on other sites More sharing options...
Corbie Posted July 8, 2020 Share Posted July 8, 2020 what sort of state are the tail lights from the wagon in? keen for some spares if they are any good. Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted July 8, 2020 Author Share Posted July 8, 2020 Just now, Corbie said: what sort of state are the tail lights from the wagon in? keen for some spares if they are any good. Not 100% sure mate...will have another look next time I'm out stripping it. I am going to take everything that is usable off and scrap the shell.. Then sell all the stuff I dont need. So I will let you know mate. 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted July 12, 2020 Author Share Posted July 12, 2020 On 08/07/2020 at 17:32, Corbie said: what sort of state are the tail lights from the wagon in? keen for some spares if they are any good. Hi mate Flick me a pm and I'll flick you some pics of the tail lights. https://www.facebook.com/profile.php?id=631474774 Quote Link to comment Share on other sites More sharing options...
yetchh Posted October 6, 2020 Share Posted October 6, 2020 Hey bro, what size are the throttles on the injection body? Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted October 6, 2020 Author Share Posted October 6, 2020 1 minute ago, yetchh said: Hey bro, what size are the throttles on the injection body? would have to check but 34mm springs to mind 1 Quote Link to comment Share on other sites More sharing options...
CUL8R Posted October 16, 2020 Share Posted October 16, 2020 Hey mate, I saw something and then went on a tangent and did some research.... This will wet your wicket http://forum.britishv8.org/read.php?2,50826 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted October 17, 2020 Author Share Posted October 17, 2020 23 hours ago, CUL8R said: Hey mate, I saw something and then went on a tangent and did some research.... This will wet your wicket http://forum.britishv8.org/read.php?2,50826 fuck.me chris you not helping my life here.... now I have a need to find a 2.3 block and go play with some Volvo head 1 Quote Link to comment Share on other sites More sharing options...
Corbie Posted January 16, 2022 Share Posted January 16, 2022 @d.p.n.s Where'd you get the carpet? happy with the fit? need to get some for my wagon. 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted January 16, 2022 Author Share Posted January 16, 2022 20 minutes ago, Corbie said: @d.p.n.s Where'd you get the carpet? happy with the fit? need to get some for my wagon. hay man. I got if from autodec in Auckland. was about $320 delivered (that's just the carpet no underlay). I used them about a decade ago for an escort and it was shit ....but I thought I would try again and I'm very happy mate.....its a great fit 1 Quote Link to comment Share on other sites More sharing options...
Beaver Posted January 23, 2022 Share Posted January 23, 2022 Just a heads up, not sure that washer arrangement on the top side will pass cert. From memory there needs to be a plate that's 3000mm2 (e.g. 50x60mm) that the bolts pass through. There is a lvvta driveshaft loops fact sheet thingy that spells it out. Edit - link https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.lvvta.org.nz/documents/infosheets/LVVTA_Info_07-2016_Drive-shaft_Safety-loop_Requirements.pdf&ved=2ahUKEwiew8W1o8f1AhXATmwGHSf_AXkQFnoECAQQAQ&usg=AOvVaw292hljGfPsbMtkkM0ZeVUf 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted January 23, 2022 Author Share Posted January 23, 2022 6 minutes ago, Beaver said: Just a heads up, not sure that washer arrangement on the top side will pass cert. From memory there needs to be a plate that's 3000mm2 (e.g. 50x60mm) that the bolts pass through. There is a lvvta driveshaft loops fact sheet thingy that spells it out. Edit - link https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.lvvta.org.nz/documents/infosheets/LVVTA_Info_07-2016_Drive-shaft_Safety-loop_Requirements.pdf&ved=2ahUKEwiew8W1o8f1AhXATmwGHSf_AXkQFnoECAQQAQ&usg=AOvVaw292hljGfPsbMtkkM0ZeVUf oh true I should look into that.i do remember reading seing that ....but they arnt in there for good yet .... the rear should be easy as.... the front will be another story. Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted January 25, 2022 Share Posted January 25, 2022 I dunno if that link mentions it or not, But you need to remove the dynamat between the doubler plate, and the floor too. 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted January 25, 2022 Author Share Posted January 25, 2022 7 hours ago, RUNAMUCK said: I dunno if that link mentions it or not, But you need to remove the dynamat between the doubler plate, and the floor too. yeah done that and removed underseal in that area. 1 Quote Link to comment Share on other sites More sharing options...
governorsam Posted March 27, 2022 Share Posted March 27, 2022 Talk to @ThePog 1 Quote Link to comment Share on other sites More sharing options...
yetchh Posted April 20, 2022 Share Posted April 20, 2022 17 hours ago, d.p.n.s said: Then I tried the TPS and set that up but the values are the wrong way around for some reason ... wide open is low voltage and closed is hig voltage. .. (not sure if it will work that way around or not will look more into it tonight. When I set up tps on my link the values were round the wrong way as well but I think it doesn't matter as long as it has a range from 0 - 100 up or down. That was an after market ecu tho.. Could be different for oem. 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted April 21, 2022 Author Share Posted April 21, 2022 4 hours ago, yetchh said: When I set up tps on my link the values were round the wrong way as well but I think it doesn't matter as long as it has a range from 0 - 100 up or down. That was an after market ecu tho.. Could be different for oem. yeah this is a link ecu.. I just swapped 12v and signal ground over and then setup again and now it's perfect.. cheers tho 1 Quote Link to comment Share on other sites More sharing options...
d.p.n.s Posted April 21, 2022 Author Share Posted April 21, 2022 On 27/03/2022 at 19:26, governorsam said: Talk to @ThePog cheers Sam. I've git a few mates to ask questions to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.