kiwi808 Posted May 13, 2020 Posted May 13, 2020 There are some good solid 12a motors out there, but housings are getting harder to find. Go hard for what they are etc. The same can be said for older 13b housings. You could go modern churbro motor but that needs more Ned’s for computers etc. I vote find a solid 12a and make all of the revs. Quote
kyteler Posted May 13, 2020 Posted May 13, 2020 Ignore Jonny. 13B Turbo or 20B Turbo. More power than the chassis can handle but at least if you crash it, it'll be proper fucked and not half ass. 1 2 Quote
Mattt Posted May 13, 2020 Author Posted May 13, 2020 Too late. 12a Bridgeport it is. I went through the paperwork today and found the wof sheet from the end of 2018. Looks like the hilux diff may need Cert. It’s currently got a green sticker on it. Hopefully the reason for failure isn’t still in system and they overlook the diff for the wof 1 Quote
BlownCorona Posted May 14, 2020 Posted May 14, 2020 i might have an uncracked dash and unpainted dials i could be convinced to part with if you want to go down that route. id have to go look in my pile of spares to see whats exactly there though. but shit at least bathe those dials in thinners! holy shit! 1 Quote
BlownCorona Posted May 16, 2020 Posted May 16, 2020 i think i have two sets of this grill if its of any interest. i may only have one sedan grill and the coupe grill fitted to my sedan in which case i wont let it go incase i ever bend the front end, but if i have two sedan grills like i recall id be happy to sell one. however. are you sure itll fit? these are all the face lifted rt81 or rt84 cars, and yours is the rt80. 1 Quote
Mattt Posted May 16, 2020 Author Posted May 16, 2020 If you have one I would love it. No I have no idea if it’ll fit im just assuming they didn’t get too carried away with changing the main body components for a facelift. If you do have one we can measure it up and hope for the best Quote
BlownCorona Posted May 16, 2020 Posted May 16, 2020 I'll get around to my parents place at some stage and see what I've got stashed. 1 Quote
Popular Post kiwi808 Posted May 17, 2020 Popular Post Posted May 17, 2020 Airbrush rota art is awesome. Please replicate. Cool having a bit of the history with the car. Makes for better sharns when out and about! /sidesharn #lingor When I sold my last Moggy Minor, I was the 4 owner, but it had only been owned by 3 old ladies prior. (Cool story bro) It then changed hands a few times and popped up at a car show in Auckland. I was like “oh cool, my old Moggy!” But the new owner was very scathing of this remark and corrected me by saying it had only had 3 old ladies owners before him. I played along for a bit before getting my phone out and showing him the car in my garage sandwiched between a couple of Mazda’s. He was a little sheepish after that. Twat. Disclaimer: this has to be one of my best/worst side sharns that is completely irrelevant to thread. Sorry/not sorry. 8 3 1 Quote
maxted Posted May 18, 2020 Posted May 18, 2020 @Mattt I think from memory rx2's had a sump with a bulge at the back, or can get a cast alloy one already drilled in reverse. also I think the pick up is shaped that you can cut it and just add some pipe to extend it to the bulge. Quote
maxted Posted May 18, 2020 Posted May 18, 2020 http://racecast.com.au/product/reverse-drilled-12a-sump/ Quote
Valiant Posted May 21, 2020 Posted May 21, 2020 Those photos are so good, is that the game I see in one? The only disappointment is there are no pics of it with Titans. 1 Quote
Mattt Posted May 21, 2020 Author Posted May 21, 2020 None other than the notorious B.I.G. much disappoint that’s gone. 1 Quote
BlownCorona Posted July 25, 2020 Posted July 25, 2020 Big fan of the wheels. your progress is getting me so amped to get back into my car after the crown is finished. let me know if you end up swapping out the door cards, id be keen on your ones with the speaker holes cut if you get rid of them Quote
Mattt Posted July 25, 2020 Author Posted July 25, 2020 Thanks man. I really appreciate that my car can be inspirational. I will be having new door cards made although my vinyl is peeling at the bottom so not sure if it’s of any use to you or not? on that note have you got a RH rear pillar vent internal cover? It’s the metal cover that goes on the inside of the vents on the pillars I only seem to have the LH one for some reason. Quote
datlow Posted July 25, 2020 Posted July 25, 2020 Shit yeah A+ speedy work wheel colours looks good imo, On 18/05/2020 at 11:34, kiwi808 said: Airbrush rota art is awesome. Please replicate. Ling/ And then have a matchingish bike https://www.trademe.co.nz/a/motors/motorbikes/motorbikes/sports/listing/2702552033 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.