peteretep Posted May 12, 2007 Share Posted May 12, 2007 So im putting some vr4 panels onto my galant, so I drilled a few holes, measured it several ways, but alas, it didnt line up, so I've got a bunch of holes now and i dont want to drill anymore. But in the past I've had trouble finding super sticky double sided tape, and I need it to be thick, like that foam type stuff to allow for some movement. So where would i get this from, does repco etc do anything like that? Quote Link to comment Share on other sites More sharing options...
Ogre Posted May 12, 2007 Share Posted May 12, 2007 i used some 3M stuff, was mega strong and thick.Wasnt cheap tho i dont think oh tha rhymes Quote Link to comment Share on other sites More sharing options...
pies Posted May 12, 2007 Share Posted May 12, 2007 3m vhb. best shit ever. expensive though Quote Link to comment Share on other sites More sharing options...
peteretep Posted May 12, 2007 Author Share Posted May 12, 2007 where to get this 'miracle tape' Quote Link to comment Share on other sites More sharing options...
thminiman Posted May 12, 2007 Share Posted May 12, 2007 yuh, 3m stuff is ftw also known as mounting tape repco might have it, placemakers/mitre 10 should a thread about double sided tape got me rofling Quote Link to comment Share on other sites More sharing options...
Ogre Posted May 12, 2007 Share Posted May 12, 2007 its the stuff with the green tartan crisscross on the packaging is it?I cant remember.I got it from mitre10 or somthing.Fucken strong shit tho. Quote Link to comment Share on other sites More sharing options...
84_S12 Posted May 12, 2007 Share Posted May 12, 2007 Do you play Battlefield 2 as retep130? I swear I saw your name the other day... Quote Link to comment Share on other sites More sharing options...
peteretep Posted May 12, 2007 Author Share Posted May 12, 2007 haha, yeah im everywhere a retep130, I play xtra and iconz Quote Link to comment Share on other sites More sharing options...
Snoozin Posted May 12, 2007 Share Posted May 12, 2007 I bought 22m of 3M 16mm double sided trim tape for about $25 from Paint and Paper Superstore in Palmy. Go to a place that does car paints.... Quote Link to comment Share on other sites More sharing options...
mikuni Posted May 12, 2007 Share Posted May 12, 2007 I saw some of this at para rubber a couple days ago. It was that spongy shit, probably about 1.5mm thick. Cheap as shit though so you might aswell go crank a sample from there to see if its gunna be any good. Might be worth a look aye. Sometimes cheap is ok. Quote Link to comment Share on other sites More sharing options...
Toucan Posted May 12, 2007 Share Posted May 12, 2007 Yea seen some when I was in para rubber today also, try thurr. Quote Link to comment Share on other sites More sharing options...
peteretep Posted May 12, 2007 Author Share Posted May 12, 2007 are they open sundays? Quote Link to comment Share on other sites More sharing options...
peteretep Posted May 13, 2007 Author Share Posted May 13, 2007 ok so I got the panels on(only on one side though haha), now anyone know how to remove the 2.0 mpi sticker? Quote Link to comment Share on other sites More sharing options...
durty Posted May 13, 2007 Share Posted May 13, 2007 heat gun then peel off prepsol to remove sticky stuff Quote Link to comment Share on other sites More sharing options...
peteretep Posted May 13, 2007 Author Share Posted May 13, 2007 heat gun will be alright on the plastic panel? Quote Link to comment Share on other sites More sharing options...
durty Posted May 13, 2007 Share Posted May 13, 2007 should be i spose, just dont heat it up too much Quote Link to comment Share on other sites More sharing options...
Toucan Posted May 13, 2007 Share Posted May 13, 2007 Good luck with the stickers. I used a hair drier and tried to peel mine some off on teh she-rade, peeled half the paint off with it Quote Link to comment Share on other sites More sharing options...
fuel Posted May 13, 2007 Share Posted May 13, 2007 Wow nice dude, so glad they finally got on there. Makes it look so much nicer. Just needa paintstrip/polish those wheels haha Quote Link to comment Share on other sites More sharing options...
peteretep Posted May 13, 2007 Author Share Posted May 13, 2007 just wish i hadnt filled the car with unnecessary holes haha, ducktape covering teh holes ftw Quote Link to comment Share on other sites More sharing options...
fuel Posted May 13, 2007 Share Posted May 13, 2007 Haha weight reduction Oh well you plan on keeping them on I guess so no one will see the holes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.