Mof

A row of furrow plows And a finger wheel rake

Needs a mini plow to tow behind it

What was the question?

Next year me. Shelf for the lid to sit on Lid made from the toolbox lid, but cut down the centre both ways and welded back together so it'll fit inside instead of outside. There's a hook at one end that hooks in under the "shelf", and a latch at the other from an old truck toolbox.

Wow really I get around 500deg just cruising at 110km The highest I've seen is 750deg Do not want cracked head. I have been considering fmic

Is the egt probe supposed to be pre turbo? The one in my 1kz is post turbo...

Did you get caught up in it?

Could you not do a heat shield rather than wrap?

Sweet baby jeebuz Would you cunts knock it off with the tyre chat already

I have rats in the roof Made a rat trap Caught a rat He can't wait for me to let it out of the box And that's my story

Does it involve wood, pushbike parts, and a composting toilet?

Is the dent in your tank up against the pickup?

Compression lockup That'll make your back end skip around a bit And the scooter

The nose he's shaped doesn't look anything like the drawing

Yeah I'd be going for leads Then fire

Have you got enough counterweight to give a nice ting-ting-ting at idle?

I don't trust the tyre tread Jack up the wheels, spin the wheel and put the pointy end of a screwdriver against the tread. Leaves a nice dark line that is straight. Put the car on the ground and roll it back and forth a bit to settle the suspension. Do your measurements

I would go dsl way before appco/bnt

https://vehicleinspection.nzta.govt.nz/virms/in-service-wof-and-cof/general/vision/windscreen-wipe-wash "7. An OE windscreen washing system may be removed from a vehicle manufactured before 1 January 1992"

All the springs I have got from them have been crap.

Just don't get one of these types It will try and kill you

And dog burnouts/drifting

A really narrow car I'll show myself out...

Wheelie pics pls

Can you try knock the driveshaft in the opposite direction of normal rotation? It may have rounded over and bound up the splines. Too many clutch kicks