Sparkle Posted February 28, 2013 Share Posted February 28, 2013 Not really, very technical. Just need some ideas. Have been ordering push in centre caps for my steels, but can't make any of the standard sizes fit. They're either far too small and fall through, or 65-68mm ones won't even get close due to being far too big, even after sanding down slightly. The other thin I thought of, was the caps that use the lug bolts/nuts to hold the caps on. Chevoit do some ugly ones, and I'm struggling to find other options on fleabay. Aside from getting something made, does anyone have any other ideas? The mini ones wont fit even if they were available due to me having to bore it out to 60mm Quote Link to comment Share on other sites More sharing options...
JoKer Posted February 28, 2013 Share Posted February 28, 2013 I laser did some Acrylic (perspex in laymans terms) for my mates MX5 : even had the Mazda logo etched in and all, push fit and looked not bad as well/easy to replace will find pic when I get hm Quote Link to comment Share on other sites More sharing options...
unhuman Posted February 28, 2013 Share Posted February 28, 2013 6 Quote Link to comment Share on other sites More sharing options...
durty Posted February 28, 2013 Share Posted February 28, 2013 That actually looks pretty decent Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted February 28, 2013 Share Posted February 28, 2013 Lol that's so cool! Some cock like me would pull the ring tab when u weren't looking tho But yer I completely think you should keep your eyes peeled for anything unusual you could jam in there. Pogs? Hahahaha Quote Link to comment Share on other sites More sharing options...
JoKer Posted February 28, 2013 Share Posted February 28, 2013 anything unusual you could jam in there. rule #34 also http://www.stuff.co....-stuck-in-wheel and these spam images poor wee tikes Quote Link to comment Share on other sites More sharing options...
spiderwebfx Posted February 28, 2013 Share Posted February 28, 2013 http://bgworldwheels.co.nz/default.asp Try them. They import Cragar wheels. They also do the ones that bolt on with the wheel nuts. Quote Link to comment Share on other sites More sharing options...
Bling Posted February 28, 2013 Share Posted February 28, 2013 Depends on budget I guess, you can get custom ones made by this OS guy. //oldschool.co.nz/index.php?/user/6393-bulletz/ Quote Link to comment Share on other sites More sharing options...
Sparkle Posted February 28, 2013 Author Share Posted February 28, 2013 I laser did some Acrylic (perspex in laymans terms) for my mates MX5 : even had the Mazda logo etched in and all, push fit and looked not bad as well/easy to replace will find pic when I get hm Mean. Lemme know bout deez Quote Link to comment Share on other sites More sharing options...
KKtrips Posted February 28, 2013 Share Posted February 28, 2013 I know a guy in Auckland that can CNC centre caps for you if you give him dimensions and so on.. Quote Link to comment Share on other sites More sharing options...
Snoozin Posted February 28, 2013 Share Posted February 28, 2013 Can you please get 4 custom made with the following words engraved in each Front right - YAY Rear right - FOR Rear left - THE Front left - BEACH 1 Quote Link to comment Share on other sites More sharing options...
yeah yeah na Posted February 28, 2013 Share Posted February 28, 2013 a plonker i knew painted some pledge furniture cleaner lids silver and used window glue to hold em to his wheels.....cheap and cheerful..and tacky. Quote Link to comment Share on other sites More sharing options...
Dell'orto Posted February 28, 2013 Share Posted February 28, 2013 Brass frost plugs? Engrave some sweet gangsigns in them and tap them in place 1 Quote Link to comment Share on other sites More sharing options...
KKtrips Posted February 28, 2013 Share Posted February 28, 2013 Can you please get 4 custom made with the following words engraved in each Front right - YAY Rear right - FOR Rear left - THE Front left - BEACH Sure thing Sparkle - what dimensions.. 1 Quote Link to comment Share on other sites More sharing options...
Guest JoKer Posted April 4, 2013 Share Posted April 4, 2013 found the pics of the Mazada ones I made guy used small blobs of hot glue cos he was scared of loosing them but they are pretty snug fit, keen to slightly over size them so you can sand them down to fit Laser cut acrylic/perspex Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.