beachlander Posted May 21, 2013 Share Posted May 21, 2013 Well for the track im going to be running almost straight pipe, but for the road ill have to figure something out. Quite like your idea of turning the exhaust into an oval for extra clearance. Quote Link to comment Share on other sites More sharing options...
beachlander Posted June 2, 2013 Share Posted June 2, 2013 These are the extractors. There not very large, dont have a ruler to measure but id say there around 2 inch. Quote Link to comment Share on other sites More sharing options...
kpr Posted June 3, 2013 Share Posted June 3, 2013 look kinda like modified coby's. will be 38mm tube. look like they have been made a bit more even'ish length. probably wont work that great with your setup, but cant hurt to try them if you wanted to make them better for cheap. chop all the runners off about at 200mm from the flange. grab some 41mm tube. remake the rest of the runners from this. and use/make a good merge collector. with 2.5" exit. i would make the total length of the runners around 600mm long if you want it to rev hard. or around 700mm if you want to grab some more midrange the step from 38mm to 41mm will help stop revision. Quote Link to comment Share on other sites More sharing options...
1vaknd Posted September 18, 2013 Share Posted September 18, 2013 i hope by saying machine the spring perches off you mean cut them off with an angle grinder! Quote Link to comment Share on other sites More sharing options...
beachlander Posted September 18, 2013 Share Posted September 18, 2013 That is what happened, yea Quote Link to comment Share on other sites More sharing options...
Mitch.W Posted January 28, 2014 Share Posted January 28, 2014 yooooo, Stoked to see this thing getting worked on! Can't wait to see the wheels on it and low installed! Quote Link to comment Share on other sites More sharing options...
beachlander Posted January 28, 2014 Share Posted January 28, 2014 Yea, been doing small things for a while. Just got an email confirming that my wheels are done. Super excited. Quote Link to comment Share on other sites More sharing options...
lownslow Posted April 28, 2014 Share Posted April 28, 2014 hey sweet wag and wheels. curious to know the price to get your wheels widened? if you don't mind me asking. looking at getting some done Quote Link to comment Share on other sites More sharing options...
ANT Posted October 22, 2014 Share Posted October 22, 2014 Sicbae. Mismatched wheels <3 Incar vids are a must for us to see your rpm/noise machine at work. Quote Link to comment Share on other sites More sharing options...
beachlander Posted October 22, 2014 Share Posted October 22, 2014 Heaps of work needed to get the other riversides on the rear. CBF at the moment. There may be a garage skid to celebrate/deafen me Quote Link to comment Share on other sites More sharing options...
Stu Posted January 29, 2015 Share Posted January 29, 2015 Thank god you saw the light - not sure how many more snapchat photos of Brendan pulling the fingers at the MS i can take... 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.