jakesae101 Posted April 17, 2011 Share Posted April 17, 2011 anyone have the right compressors to do this ? valves are too deep to use the normal ones that ive used before. will repay in beers of course ether that or im going to have to build something to work Quote Link to comment Share on other sites More sharing options...
fulloc Posted April 17, 2011 Share Posted April 17, 2011 iv got a good one mate edit Uploaded with ImageShack.us Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted April 17, 2011 Share Posted April 17, 2011 For cost of beers you might be able to get your own? http://www.trademe.co.nz/Browse/SearchR ... uggested=0 Or are they all too short. Quote Link to comment Share on other sites More sharing options...
jakesae101 Posted April 17, 2011 Author Share Posted April 17, 2011 na they don't fit the ones at uj's don't fit ether they need to have the longer piece on top to get to the spring as its recessed slightly into the head Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted April 18, 2011 Share Posted April 18, 2011 iv got a good one mateedit Uploaded with ImageShack.us That wouldn't be an A12 datsun head by chance would it? Quote Link to comment Share on other sites More sharing options...
fulloc Posted April 18, 2011 Share Posted April 18, 2011 random google, but thats the comp i have, its all adjustable etc and pulled my 16v smallport head apart no worries. Quote Link to comment Share on other sites More sharing options...
DJZ Posted April 19, 2011 Share Posted April 19, 2011 Are you installing or removing? A socket + heavy hammer will bounce the collets out without much trouble, just don't hit the sides. I bought some of these for installing them. Quote Link to comment Share on other sites More sharing options...
jakesae101 Posted April 19, 2011 Author Share Posted April 19, 2011 for removal was considering making one that leavers off the cam shaft or bolts onto the head Quote Link to comment Share on other sites More sharing options...
Grotty Posted April 20, 2011 Share Posted April 20, 2011 hey, i'll strip down the head for a dozen. Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted April 20, 2011 Share Posted April 20, 2011 ^^ top cunt, will do it Quote Link to comment Share on other sites More sharing options...
jakesae101 Posted April 21, 2011 Author Share Posted April 21, 2011 hey, i'll strip down the head for a dozen. also need you to build me a rollcage Quote Link to comment Share on other sites More sharing options...
Grotty Posted April 21, 2011 Share Posted April 21, 2011 no prob, come see me, 235 cambridge tce rear building behind cambridge autos. 8 till 5 weekdays, working tomorro from 9 to 2ish and sat moring Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted April 21, 2011 Share Posted April 21, 2011 no prob, come see me, 235 cambridge tce rear building behind cambridge autos. 8 till 5 weekdays, working tomorro from 9 to 2ish and sat moring Will also tag along if thats ok, to enquirer for a price on a cage in my escort. viewtopic.php?f=17&t=15982&start=100 Quote Link to comment Share on other sites More sharing options...
2JZKP Posted May 20, 2011 Share Posted May 20, 2011 def go see grotty, top notch gc, hes done a wee bit for me in the past and not a hint of a complaint to date, when you doin twin turbos for the van parks haha Quote Link to comment Share on other sites More sharing options...
jakesae101 Posted May 20, 2011 Author Share Posted May 20, 2011 yea head is with him just been to lazy to go get it again i really should however Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.