datlow

Is that the rig you use at the hospital too??

gonna buy some rim tape today.. safety first!

Shit yeah not long to go now do we need to transfer some moneys over for incidentals/ meat flavoured snacks? Can’t remember if it was on the form and or if I’ve paid

BBC I hope /why no ureweras Tortron?

/hairy beard rides? You must be exhausted

Been lazy, stripped the Cm125t had parts vapour blasted Fuel tank suprisingly only had 2 dents under several layers of paint and full coat of bog have it as work to try and remove dents then hopefully get it powder coated had forks and front rim powdercoated, bought a complete ali rear wheel (wider rim and bigger spokes), bought some spokes for the front but they may be a tad too long reckon they look nice tho now to mock up and find some tyres and tubes to fit got a s/h cheapy 120/90-17 but it’s too wide

Hope he doesn’t get stage fright with 30 other guys watching....

My van has as standard a weird angled filter, luckily the engineers actually thought it through and built in a little oil ramp/drain thing

Yip big one with hydraulic wrench and 30+ bolts takes about 3-4 hours with two people other one is 12 bolts (cheat and use a rattle gun for most of it) and then swing on a 800Nm wrench after

We use same style thing at work one for the main shaft that’s about 500mm and another maybe 150mm diameter for the brake disk they handle the 2000kw+ no worries doing them ups a right cunt nugget tho

Probably not, but I’m Coming up to Tauranga next month in a van weekend of the 19 oct

Yeah the insides of the solenoid will be pretty shitty and prone to doing it again/ could go the other way and not engage properly too either pull apart and sand contacts smooth (prob a cheap cast plastic unit tho) so yeah buy a new one

Ah excellent my cm125 is 6v and piss poor headlight etc, keen for 12v so I can use a spare led speedo etc too guess I should get it back together and running and figure out all this black magic

was it 12v before the electrical mods?

Ah the ol buy another bike that runs trick! at my current rate that’ll be me

Yeah nah yeah Got parts back last week then had some of the bits powdercoated still gotta order spokes and a wider rim then reassemble, new tyres and wof reg

AFAIK Thats the way, and fresh fuel, ie dont leave the same fuel in the tank for years

Bllody hell thanks dear, put the kettle on would ya love yeah na three months plenty of time eh

ILene h0w do you turn this damn camerA thing around!!

How ridgid is it/ Make sure it’s not sitting warped etc

Was it the Tvr “specialist” that had done the rebuild?.......

On the cheap you can fill with white vinegar or citric acid, there’s a few tank repair kits available think a few guys on here have used them and will chime in on best ones/way to do it

@tortron?

oh yeah theres a spare bed at waikaremoana if anyones keen (just have to put up with 4 others) ? $35 With sheets included