smokin'joe

exact wording i would have used running Migmate 180 with straight Argon and very hard to get an even consistant weld through the torch, as a slight bend will slow the wire down

a weekend meet could be a goer ? beer and snacks or sommit i am often up during week, but always on mission, as i fecking dislike CHCH on weekdays !! so need to have extra excuse for a weekend visit to get some jobs attended to

how is the Toyota LN147/167 with 5l-E FBW throttle set-up ? plenty round an must be rugged as never heard of issues

i too am a frequent southerner, but not permanant, as i havn't built a toybox yet so i can acquire excess shit at this property as well !!

try Hilton Haulage. they lifted pallets of concrete blocks 15-20m from truck 10 years ago for me, and shit got way cleverer since

@Bling as an E70 coupe owner, do not use anything but the best glue for the windscreen. i cheaped out with mine, and even with a cage, it still flexes like hell. any screen that is glued in, is essentially a bracing element

there is a Suzuki van insert that fits the common jappo coil-overs. tried to get replacement adjustable-valve KYB inserts, but JIC/KEI office etc get them custom made from KYB

my manual bus is not a fan of hills, needs a split-diff to halve the ratio.

i breifly considered turboing my one, but by the time one acquires bits and matches it up, tunes etc, be easier to find a 1HD-T, and sell mine underground

and it's allergic to hills ?

can't remember specs, but Mitsi 4G63 8V sigma valves are an upgrade for T engines. will measure when back home

surely, if the valve springs don't bind, the 2mm shorter will work. the 5mm longer ones could be shimmed at the head if the caps don't tighten due to installed spring tension whole lot of ifs, as a lazy old stationary motor not as critical as 10K screamer

what about a sealed electrical enclosure ? https://www.jaycar.co.nz/sealed-abs-enclosure-240-x-160-x-90mm/p/HB6134

being contact with original builder is the key, from when i talked to tech office

looking sharp does this still have 38mm main hoop ? did you have any issue with modifying cage members/gusseting ? last time i talked to MSNZ about my cage, and wanting to add components, they were quite dark on it, but was 3-4 years ago, when the rebuild was supposed to happen.

cheap enough to give it a hoon. would have had a go on one, but scored a Magmate180 for reasonable price

looks pretty decent, shame about shipping price !!, get it filled with filers or something similar. whatever you do, don't use the budget marine style ones. they don't seal and are illegal for use, but many scrutineers let them pass previously, SLA/VRLA batteries were not required to be sealed, and i am one of many who paid the price. had a non-rusty RWD Toyota (yes, rare !!) rust from the inside out , and requires extensive repairs before next event

will give her a buzz and get back to you. cheers

haha, only good AU is a crushed or derbyed one !!

down here for a night of it ?

25th July Darfeild to Darfeild allowance for 2 people

povo spec AE70, on spitties and bolt-on 2" flares, then ?

a good friend of mine wants to spoil her son with an epic ride to his first Formal is there anyone in CHCH with something special for his arrival ? dosn't need to be classic/hot-rod/ mental, just that she merely has a Mazda MPV, and the young fella deserves better than that. beers, fuel, abuse for payment

does that make it closer for Wayne in the mighty Hatsu ??

true, but even worserer with the shitty NZ 91 fuel