Jump to content

AllTorque

Moderators
  • Posts

    18105
  • Joined

  • Last visited

  • Days Won

    150

Everything posted by AllTorque

  1. You will be able to compensate with normal wheel alignment adjustment, but it shouldn't look like that. Id be asking for a replacement.
  2. Shit yeah. You will sure learn a lot from Andre.
  3. It is not legal to paint a white plate black. I haven't heard of anyone getting a ticket for it tho.
  4. The food was great, for what I paid BYO is also great when hitching a ride. Now enjoying a Port nightcap.
  5. Super rad. If you slam it on Supremes you will be my new hero.
  6. There is no point checking the resistance of the temp sensor unless you know what to expect at what temp.
  7. Get some brake hose clamps. Put one on each hose. See if you get a firm pedal. If so, get a friend to release the clamps one by one. If the pedal drops you know where the problem is. If you don't get a firm pedal with clamps on the problem is before the hoses.
  8. "It is permitted to replace a complete halogen headlamp unit with a complete HID headlamp unit." https://vehicleinspection.nzta.govt.nz/virms/in-service-wof-and-cof/general/lighting/headlamps see note 8 I would say they need to easily recognised as being HID lamp units.
  9. Pic 1 is a dampener to reduce pressure fluctuations as the injectors open. Pic 2 is fuel pressure regulator. Pic 3 is charcole canister. Dont just chuck a check valve in. You'll want to confirm what's going on with a fuel pressure gauge. Have you checked for codes yet? A dodgee cam position sensor can cause long cranking times.
  10. Congratulations on getting this legal. Looking rad.
  11. I do, but I tried to take a short cut and now I'm stationary
  12. What year windom? Does it have a diagnosis plug like this in the engine bay? If so, connect T1 and Te1, then count the flashes of the engine light to check for fault codes. Have you put fresh fuel in it yet?
×
×
  • Create New...