flyingbrick Posted December 30, 2014 Share Posted December 30, 2014 Nice man. Why's ya tig suck on panel steel? I used to think the same about mine but it was purely skill related haha Quote Link to comment Share on other sites More sharing options...
japawagons Posted December 30, 2014 Share Posted December 30, 2014 My TIGs a small inverter style unit and the arc isn't stable at the low current settings. I can weld brand new 1mm but it's right on the limit of being to much current, anything below that and the arc just drops out. Works awesomely on exhausts etc and anything thicker. Might be my skill level, but I can't trust it on this kinda job anyway so no point trying to use it. Quote Link to comment Share on other sites More sharing options...
Bangbug Posted March 9, 2015 Share Posted March 9, 2015 FOLLOWED. This looks great, you're doing a fine job. Quote Link to comment Share on other sites More sharing options...
Rookie Posted March 10, 2015 Share Posted March 10, 2015 You are doing a good job bringing this back from the dead. Good Job! Quote Link to comment Share on other sites More sharing options...
japawagons Posted March 10, 2015 Share Posted March 10, 2015 Thanks, getting there slowly. Still a mountain load to do... 1 Quote Link to comment Share on other sites More sharing options...
Truenotch Posted March 10, 2015 Share Posted March 10, 2015 I have a new found urge to encourage you to take this thing out and shuffle it around all the roads. If you'd been at Nats we could have had a Rookie vs. Japawagons Italian sports car battle along SH25. These rule. 1 Quote Link to comment Share on other sites More sharing options...
toymotor Posted January 6, 2016 Share Posted January 6, 2016 Oh wow, that's really shiny, did you have some champ buff it for you? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.