lowlancer Posted September 6, 2007 Author Share Posted September 6, 2007 Breathing new life here Can a SOHC head go on a DOHC 4G64 block? So SOHC 2.4 essentially. Pretty sure it's crank stroke that makes it 2.4? Quote Link to comment Share on other sites More sharing options...
P_Star Posted September 17, 2007 Share Posted September 17, 2007 ok, if this has already been answered I apologize.. just point me at the link... or answer. I just bought a 4g63 equipped donor... has a 5 speed box in it but the tunnel has been cut to fit the shifter. am i right in assuming I need a 4g32 box to match up to the factory hole. if not is there a box I can bolt up that will match the factory shifter hole.. would like to keep all the factory trim etc if possible so need the right length box... cheers Quote Link to comment Share on other sites More sharing options...
lowlancer Posted September 17, 2007 Author Share Posted September 17, 2007 Yeah 32 should work but is weaker Ogre used L200 box I think, check his thread to see, and his didnt need cutting Remember, you'll need a longer dshaft Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted September 17, 2007 Share Posted September 17, 2007 ogre used normal gj siggy one, which necessitated cutting. can't use console withou mos to it etc. think he's going for an l200 extension housing at some point though which = no cut Quote Link to comment Share on other sites More sharing options...
lowlancer Posted September 17, 2007 Author Share Posted September 17, 2007 Oh did he? Yeah remember he wanted to go L200 extension stz, thought thats why it all took so long Quote Link to comment Share on other sites More sharing options...
fuel Posted September 17, 2007 Share Posted September 17, 2007 Breathing new life hereCan a SOHC head go on a DOHC 4G64 block? So SOHC 2.4 essentially. Pretty sure it's crank stroke that makes it 2.4? And which DOHC 4G64 are you talking about? DOHC 6 bolt 4G64s = non existant Quote Link to comment Share on other sites More sharing options...
lowlancer Posted September 17, 2007 Author Share Posted September 17, 2007 Oh right. Was just throwing a few thoughts through the ol noggin Quote Link to comment Share on other sites More sharing options...
fuel Posted September 17, 2007 Share Posted September 17, 2007 4G64s have a bigger bore and the block is 6mm taller too, to accomodate the 12mm longer stroke. SOHC 4G64 heads have massive combustion chambers and bigger valves apparently - according to austarion anyway. Quote Link to comment Share on other sites More sharing options...
lowlancer Posted September 17, 2007 Author Share Posted September 17, 2007 Ah okay, I thought it was just the stroke, not bore Quote Link to comment Share on other sites More sharing options...
Ke36 Posted September 17, 2007 Share Posted September 17, 2007 im using l200 box steez, comes out bang in the right place in my ex Quote Link to comment Share on other sites More sharing options...
P_Star Posted September 18, 2007 Share Posted September 18, 2007 hmmm. mine is pre EX vintage but it sounds like I need to track down an L2hundy box... anyone got one? or failing that a 32 box as a temporary/non hacking metal measure... Quote Link to comment Share on other sites More sharing options...
P_Star Posted September 18, 2007 Share Posted September 18, 2007 so hey, does the 4G52 box (from a 4x4 l200) work too, I just don't want to buy it and have it not work... cheers Quote Link to comment Share on other sites More sharing options...
fuel Posted September 18, 2007 Share Posted September 18, 2007 probably not from a 4x4 L200 as the transfer case will be hanging off the back of the gearbox. Quote Link to comment Share on other sites More sharing options...
P_Star Posted September 18, 2007 Share Posted September 18, 2007 Ah yes, that would make sense haha. retard = me Quote Link to comment Share on other sites More sharing options...
Rusted Posted September 20, 2007 Share Posted September 20, 2007 After skip reading that lot. 4G54 boxes will they fit into a narrowblock, or are they a wideblock? Quote Link to comment Share on other sites More sharing options...
P_Star Posted September 20, 2007 Share Posted September 20, 2007 Just got my L200 box sorted, sounds like the guy may have more than one incase anyone else is looking... hundy. Quote Link to comment Share on other sites More sharing options...
Rusted Posted September 20, 2007 Share Posted September 20, 2007 Hundy bucks? Where he at/Who can do me a favor? Quote Link to comment Share on other sites More sharing options...
P_Star Posted September 20, 2007 Share Posted September 20, 2007 yup, well thats what he charged me... plus getting autoparts express to bring it up to auckland... 35bux sweeeeeet! he is in dannevirke... got some L200 parts listed on trademe http://www.trademe.co.nz/Trade-Me-Motor ... 2.htm?p=13 Quote Link to comment Share on other sites More sharing options...
lowlancer Posted September 20, 2007 Author Share Posted September 20, 2007 Hundy bucks? Where he at/Who can do me a favor? Get my PM boes? Keen to get that seat this Sunday eh, otherwise wont be up till xmas Quote Link to comment Share on other sites More sharing options...
Rusted Posted September 20, 2007 Share Posted September 20, 2007 Get mine boe? At work saturday so I at work. I'll bring the seat with me. 0273755651 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.