sr1600

Im all for this idea, Imagining the viva doing 9000rpm up the passing lane with the bikes/rack on the back.

Radisich Telstar Engine ? I think they are,they go well and there nice and smooth. But id be interested to know gas milage (vs the rotary) as I dont remember the telstar leaving the flat driveway that much. What about the setup Mjrstar is pulling from the mx5

Ill second that, most would of settled for a BP-T. I like your style far better My concern these days is the lack of strong rwd boxes we have to choose from (especially ones with removable bellhousings) be interested to see which way you go

Whens your next race at taupo? Im coming up for a look That noise is just horny, you wait for the gear change while the revs just keep climbing and climbing.

Do you a deal on the complete ca18det setup ive got stashed (for when i get a 1200 coupe) if your interested

Wicked dude ,i would call a clean warrent a pass in project finishing school hahaha I would of never choose a colour like that for my wheels but just shows my imagination just couldn't see the awesomeness of the colour

Are you supposed to install rear belts if your car never had them now?

The clock in the rx2 will kill the battery over about 2 weeks, I normally just flick the kill switch off

Always wondered what modification you would have to do with a supercharged carby? The carby works on the volume through it and the throttle controls the mix of that volume? So if you suck through the carby whats changed? The volume through it doubles/triples but the mix is still dependant on flow? Compressing that volume is still the same ratio, so how much tuning is involved in something like this? Always wondered.

Love these things , good base to start from. ROH venturo are the wheels, come custom widths and sizes some as any other 3 piece wheels.

Got back in over the weekend, got the missus going up during the week (or next) so will organise something with her if your still keen

Sorry mate wouldnt go into his account fast enough only overnight but thanks Still looking for options

Thinking about picking up a set of 13bt plates from Matamata Any OSGC keen to pick up and hold them till i can get up there to get them? thanks Mark

To be honest i didnt think around 500 NZD for the steel hubs was all that bad, throw some new bearings at them and bolt on.

been looking at similar hubs as well making both cars the same stud pattern Then my Rota RKR will fit on the rx as well http://msfracingcomponents.com.au/mazda ... omponents/

Looks sweet dude , get those wheels painted

Anyone recommend a panelbeater in taupo? Considering trucking the car north but its a helll of alot easier to keep an eye on locally.

otherwise will be up again next month

VG - If you can get it to my new pad in taupo, ill bring it up Sunday if you like Drop us a PM

Love it and agree those wheels are an awesome trademe score Lets see it brappin

mine are e30 260mm rotors , have taken 6mm overall out to make them fit the back of the rx2 hub

Such a wicked project , love the old lada's but they are few and far between these days The more of these pics I see, the more I like the colour-coded wheels maybe slightly darker than the car Get the buffer out and give the paint a birthday , mustard coloured rims with the big white walls and some suspension refinement of about 4-6" and your sorted...........

In the middle of doing this now, but with a fc3s caliper as the they arent as wide as fd3s ones so dont protrude as far out. Went down to the 260mm bmw disc rather than the 276mm fc3s disc's so hopefully 13" standard will fit. Looking at redrilling and spacing standard backing plate like it was ment to be there.

For what your gonna do with it a $40 B&D grinder will last you forever id say Bit different when your grinding pipe / steel all day you have to buy good shit otherwise you spend more time replacing it than doin it

Heard some good reveiws out of the guys in rotovegas , think this is him http://www.mcstripes.co.nz/mcstripes.php?action=items