tortron

you could go for a needle with less taper at the end (letting less fuel through at idle)

iv got a wiper unit, should you not have one considering you are a morrie owner, il bet you have 5

depends if it effects the pattern it throws

Made a sweet key chain Picked the skulls up from a place on route 66 Stripped down the carb and sprayed cleaner all over it used some rtv copper gasket goo in a few places Re-tapped a couple of threads - and threw it back together Much nicer starting and running, i figure the jets were at least partially blocked, along with air leaks etc Roof spot light has torn the roof skin through vibrations. will need to weld it back up and install some kind of reenforcing

spin up some longer pistons out of brass stock?

just painting it will be fine hell my truck was painted with house paint 10 years ago and its still stuck on like shit to a blanket

Standard Flywheel weighs 7.85 KG/17.3 lbs Flywheel now weighs 5.55 kg Shiny Should keep up with the morrie 1000's now

Flywheel now weighs 5.55 kg discuss

i suggest wrapping the frame in leather, then setting it on fire old timey rust proofing

i would have to say....... its not bad

just so i remember Standard Flywheel weighs 7.85 KG/17.3 lbs

i suggest adjusting them correctly then doing alot of heavy breaking just prior to the test my morrie with fully rebuilt breaks - better than new had issues too

wow, that scares me, the electrics are dodgy already However, i do need some pipes made up for the water pump

^ i think you can from vintage car parts specialists mine is crap and crumbling, so i had planned on soemthing like that The thought of using black nylon type braided hose had crossed my mind

have since put another coat on/got all the bits i missed was a bit more dust in the shed than i had liked (outside was far better when i painted the rest of it) but whatever, its better than factory

have since put another coat on/got all the bits i missed was a bit more dust in the shed than i had liked (outside was far better when i painted the rest of it) but whatever, its better than factory

its black now but i wish i had painted it yellow actually, that primer is a close match to what i covered the parcel tray in

iv heard it all

I dont have to look at me, so jokes on you

Totally am

mine already is bruv

sacrilege Im widening a set of standard rims

yea paint fumes

i think this would look nice in a cream colour paint