-
Posts
10628 -
Joined
-
Last visited
-
Days Won
6
Posts posted by Truenotch
-
-
- Popular Post
- Popular Post
-
- Popular Post
- Popular Post
Holy wow, what a ride that was! Thanks to everyone who had a hand in organising it and driving support: @RUNAMUCK @Willdat? @- i5oogt - @JustHarry @Mof. You're all absolute legends and every rider is appreciative of your efforts.
I can't believe the terrain we managed to hoon through. Mt Patriarch and the Maungatapu Track were both outstanding and really challenging. A couple of years ago I never would have thought about attempting "roads" like that. Super stoked to have done it .
Already looking forward to next year... if I didn't have a job I'd be keen to do it again with the Auckland crew in a few weeks.
Here's a few favourite photos from the journey:
Edit: @JustHarry - that oil is mine. It can be donated to anyone who needs to do an oil change on their bike... @RUNAMUCK was making noises about doing an oil change on his NBC.
- 11
- 2
-
- Popular Post
- Popular Post
-
-
On 10/09/2020 at 16:47, RUNAMUCK said:
We'll likely do a BBQ lunch on this day, because there is literally nothing on this route.
Just checking as I pack - is a BBQ going to happen tomorrow?
-
2 hours ago, Chunky_t said:
accommodation
Where are you staying in Hanmer?
-
How was the meet @Beaver? Looks like a cool location for it.
-
- Popular Post
- Popular Post
I've got a bit of downtime until the next race meeting, so took a chance to get some long awaited fabrication work done. I highly recommend Nick at SAFE Engineering in Palmy for anyone who needs automotive fab work / roll cages / other small engineering jobs taken care of.
I've been needing to update my harness mounts since the rules changed a little while ago. Nick added a fresh bar to wrap the belts around and keep the harness on a good angle for my new neck restraint.
While he was at it, I got him to add jacking points to the sides of the car. The vertical tube goes through the floor and is reinforced by a foot plate. This means I don't have to risk crushing my sills or chassis rails when jacking the car up from the side.
And something I've wanted for AGES. Sill stands. Nick bored the sills and welded tubes in place that I can slot a set of stands into. This will make life far easier at the track and it'll be quicker to get the car up in the air for checks and maintenance. The stands will be made soon.
The current state of it:
- 40
-
@Pee Dubs ^^^ This should answer your question about whether you've entered or not .
- 1
-
10 hours ago, Bovillain said:
This is really great.
Thanks. It's been super fun to get it out on track again.
-
12 hours ago, JustHarry said:
@Truenotch i have a few spare seats in thd cruiser still. Just me and bart so far
Siiiiiick, I'll book my flights now.
- 3
-
On 11/02/2021 at 08:54, Tumeke said:
If not, we will hit the road early on Sunday to ensure we can get back, pack our bikes and get to the airport before 7pm flights.
Speaking of this. I'm thinking of flying into CCH on Thursday and returning on Monday afternoon.
Does anyone have a spare seat for me to get back to CCH? I can get to Hanmer on Thursday night and my bike will be on @WankBankA100's ute, so it'll just be me and my small bag (and a backpack).
-
18 minutes ago, Pee Dubs said:
Who’s still planning to go from the NI? @Truenotch@WankBankA100@Tumeke I have a small car trailer that could transport a few bikes across the strait and to/from Hanmer if that helps?
I have another friend who's keen to attend from the NI too. He's based on the Kapiti coast, so we could all work together to make this work.
At this stage I'm planning to fly into CCH on Thursday and will get a ride out to Hanmer with a girl I'm seeing. Then will likely need a ride back to the north island on Sunday/Monday.
- 3
-
Leave approved. Entry incoming.
- 4
- 1
-
- Popular Post
- Popular Post
8 minutes ago, Early jap nuter said:I think this thread is a problem
Agreed.
Locked.
- 5
- 11
- 1
-
5 minutes ago, RUNAMUCK said:
I've got one spare bed in Hanmer, and one spare bed in Blenheim.
Havent booked Nelson yet.
Can I tentatively take the Blenheim bed? Keen to snag a bed in your Nelson room too if that happens. Gotta get my fill of Bort sharns for the weekend.
I'll sort myself in Hanmer.
- 1
-
Who's sorted accommodation so far? I'm keen to get involved with something in Blenheim and Nelson.
** Yet to clear the leave with the new job I'm starting this week, but am pretty confident I'll get it cleared.
- 1
- 1
-
- Popular Post
- Popular Post
I had limited time to finish the panel work, so got it to a level that looked OK, gave it a lick of paint and threw this back together. The door is pretty wrinkly, so I don't think I'll fix it... Fibreglass doors will be happening soon...
Spent my birthday at the racetrack. I had a cold, so was off the pace a wee bit, but managed consisted 1.17's all day long. The consistency paid off and I came away with a win in the final race!
I did a terrible job with my camera and didn't have any charge in the batteries, so here's the only vid that worked. I qualified on P2 against some much faster machinery. Was swamped off the line and had a good race to come home in 3rd (one of the guys up ahead received a drive through penalty, gifting me 3rd place).
Put the car on the trailer on one piece and am currently second in the GT Cup for the summer series. The final round is in April, so hopefully I can get a few good results to have a chance at winning the series.
- 26
- 3
-
I'd be interested in an afternoon/evening jaunt down that way.
- 1
-
- Popular Post
- Popular Post
Shouldn't be too hard to get it good enough for the next rodeo on Jan 23/24th. It can stay a bit rough and will finish it when I've got new doors to get the lines right.
- 15
-
Made a start on pulling the dents out. My shed neighbour let me borrow his porta power. Managed to get most of the shape back into the panel.
The door will be replaced at some stage, so I'm not too worried about getting that straight, but will spend a bit of time getting the quarter panel as straight as possible with a hammer and dolly.
After some initial kicks and chipping off bog (it's not a virgin panel, haha)
Then after a poke with the porta power:
It's got a few ripples! But already a big improvement.
- 7
- 1
- 4
-
-
Only milk comes with a blue top.
Dad's factory AE86 goes hard for what it is though. It's done ~150,000km and still has the factory air inlet over the radiator. It's no smallport, but it'll do.
-
30 minutes ago, sleeektoy said:
P&S autos
They really didn't think their name through, did they?
- 2
Molesworth Moped Melee, 5th, 6th. 7th march 2021
in South Island Region
Posted
You definitely deserve a brown diamond award for this year's punishment.