UTERUS

No problem at all.

Yea I had to gear mine down so slow it's comical, and it barely lifts an RX7.

@rusty360 those numbers mean fuck all in the real world, it can easily be drawing double that current.

Sorry if I come across as negative, but it was generally a pretty miserable experience doing the conversation to end up with such a shit product that only just works.

Oh bro if you've got three phase then that is by far the best solution to get a circuit run to the hoist. Conversion to single is about $800 for parts, depending on hookups.

Keep in mind it's easy enough for us to wire is VSD, but there's a fair bit of fucking about with limit switches etc.

Yes I've done exactly this about 12 months ago. It's less painful to sell your hoist and get a new hydraulic one. However if you really want to make it work, you'll need a 3kw cap start cap run motor and to replace your contactors with atleast 16A versions.

@Ned helped me getting Arduino set up for the 0-5V wideband output.

Sorry I don't like sleeping and riding with blokes for three days.

Ya get to keep full interior for storage, mine is erect in 30 seconds.

Can we ride from Napier to Mangatutu Hot Springs? https://www.nzhotpools.co.nz/hot-pools/mangatutu-hot-springs/#description

I don't have anything insightful to offer on solar, as I use 100AH lithium, redarc bcdc charger and 200W panel for futureproofing. Lithium Iron is at a price point now, that they are better value for money long term than AGM. Here's some more fridge options though. I see there is a Jaycar reseller in Nelson if you wanted to poke them IRL. https://www.jaycar.co.nz/search?text=brass+monkey&CSRFToken=08de16a6-2294-4871-b8c9-5615c862547a

Genuine lol • Seriously go over your shit bike again and fix anything that is going to fuck out. Lock tight and lock wire is your friend. Expect long sections of wide open throttle nangs.

Same

Smells like a sticky idle control valve.

Leave it on for awhile longer, give it a few whacks with the dead blow.

Can you make the line out of steel and use wee silicone or rubber joiners at each end? Or go for a walk around pick a part/zebra for a hose the right shape.

YEP

10 whole units

If you just pull the trigger and not weld, does it trip the breaker?

Yea is it solenoid or contactor? If it's contactor, then any wholesaler will get you one.

Gas solenoid? I usually start with the supplier of the machine, if they can't help then Google.

Holy shit that was a burn. Red looks sexy, superchargers are cool as fuck.

I've got a factory 07 RMZ250 muffler if you want.