Mof
-
Posts
10044 -
Joined
-
Last visited
-
Days Won
1
Everything posted by Mof
-
Drop the sump and check the big ends? Probably can't, some crossmember in the way or something murican. I've had the v8 out of a f450, took the cab off to get to it.
-
Let me know if you get stuck with the fd42. My work has a Nissan truck wreckers in Dunedin, I could see if they have anything.
-
What about cutting the long rod off short and locking it in a position that suits?
-
Skim a little off the calipers?
-
Looking so good man! Can't wait for driving/switch flipping vid Btw Gas struts go the other way around (rod downward). Keeps the fluid against the seal so they don't dry out and leak.
-
@chasinthemirage pop down and take a geeze at my EGT some time if you want
-
Is there a park light fuse?
-
I'm sure there's a step or two Or a ladder
-
Woops. Should have checked this thread
-
Where's your fuel tank? More weight in the nose would help get it up
-
@chasinthemirage http://cr4wd.org.nz We're well off topic now
-
They do drive on the road much better, if you're not planning serious club type offroading a beam isn't necessary. Plus newer vehicle, less rust We had a few gen 2s in the club and they did just fine
-
2nd gen prados are pretty cheap, and 1kz Better than a surf imo
-
I feel like he's asking 13bt money for a 3b though
-
Swb or mwb with frp top? They have a habit of rusting around the windscreen frame. 13bt would be so much better
-
So... It's at the wof mans discretion?
-
Is there a threshold for suspension lift/lower before cert is required? (Lift in my case, spring only) And how do I know what standard height is/was?
-
Would it be tidyer to splice into your dash backlight wiring?
-
Probably a busted rollpin in the 3rd-4th fork. Good to see it's not making soup
-
C clips in the free wheel hubs? Don't Chuck the old ones, make sure the ones with holes clear the sliding part of the freewheel hub. Need some like these with a flat end
-
Eastcapescapade 2018 November 9-10-11
Mof replied to johnnyfive's topic in Upper North Island Region
And stickers? Totp Lingor -
Could you get a length of threaded rod and cut bits to size?
-
Looks nasty Can they save any of his face?
.jpeg.3f7bb2bb1dbf05efb384eb23f10e8205.jpeg)
.jpeg.a42f15b1101efcd4fc76af73e954662f.jpeg)
