VZ - intermittent starting issue

[tortron]

15 mins in the oven worked for my TV board

 

[Yowzer]

I've done that with graphics cards a few times. Might give an ECU a go one day and see what happens.

[governorsam]

Have fixed an iPhone wireless chip problem by putting a soldering iron on the chip till the solder gets shiny.

sounds dodgy, but it worked.

[tortron]

I've redone a few electronics, got a led backed aliexpress magnifier to help with the smaller stuff, but not sure what the inside of a vz ecu would look like. Probably more refined than early 2000s stuff

[vk327]

injectronics are the specialists in aus repairing vz ecus , absolute garbage bosch ecu (they burn up the tracks inside the ecu not really a diy type job on multi layer pcbs) to go with equally as junk rattletec engine, my tuner/programming  mate has replaced over 70 ecus in  vz v6s in the last 2 years

[Flash]

Injectronics, yep, that's the place. Saw a video clip of their re-soldering machine in action. It's a pretty fancy piece of kit. My ECU would fail when hot and then work once cooled down. There was someone here in Straya marketing a bracket that moves the ECU further away from the engine. Supposed to improve the situation, but I have my doubts.