J-W-G Posted February 4, 2012 Share Posted February 4, 2012 So i can get some ln61 surf 4pots for cheap and just need to know if they will accept a 260mm to 280mm rotor and if they run a vented or solid rotor. also can someone recommend rear calipers that use an internal drum brake. Oh and piston sizes so master cylinder can be sorted accordingly. Pure Quote Link to comment Share on other sites More sharing options...
johnnyfive Posted February 4, 2012 Share Posted February 4, 2012 http://www.znoelli.co.nz/Slotted_e-cat/Toyota%20-%20Light%20Commercial.pdf Dia - 302mm thickness 12.7 min thickness 11.5 Unsure if LN60 had vented rotors or not, my rn46 didn't, but my ln106 does, still very thin rotors for vented I think from memory. Hope this helps? Quote Link to comment Share on other sites More sharing options...
J-W-G Posted February 4, 2012 Author Share Posted February 4, 2012 Very thin indeed hmm and abit big diameter wise as i dont need anything over kill as its going on my escort and ill have 16inch rims max Quote Link to comment Share on other sites More sharing options...
Shandangles Posted February 4, 2012 Share Posted February 4, 2012 use nissan junk, easily found and have drum handbrake. FC3S RX7 or altezza could be front options too Quote Link to comment Share on other sites More sharing options...
mjrstar Posted February 4, 2012 Share Posted February 4, 2012 I run a 1 inch camry master with hilux 4 pots and the rotor is a dr474 from memory around 275-280 mm dia. Fits under a 15 rim. Might be a pic somewhere in my starlet project thread. I used s4 rx7 rear calipers and a mixture of r32 and r30 cables Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted February 4, 2012 Share Posted February 4, 2012 I use hilux 4pot with a 300mm disc on my escort. 15 inch rim. Quote Link to comment Share on other sites More sharing options...
J-W-G Posted February 4, 2012 Author Share Posted February 4, 2012 I use hilux 4pot with a 300mm disc on my escort. 15 inch rim. Hows the braking? Vented rotor? Width? Might go with nissan junk Quote Link to comment Share on other sites More sharing options...
Gaz Posted February 4, 2012 Share Posted February 4, 2012 Austin Princess is by far the easiest option.... bolt on! Following that the volvo 4pot Gaz Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted February 4, 2012 Share Posted February 4, 2012 I use hilux 4pot with a 300mm disc on my escort. 15 inch rim. Hows the braking? Vented rotor? Width? Might go with nissan junk yea vented rotor, 22mm wide i think from memory. (RS Focus) I would us nissan or mazda stuff now. hilux is sooo heavy. problem with princess is same - really heavy and can only use on a 260mm disc if you want it to bolt on. then you have to space them to fit vented dics etc. jap stuff is good - pads are easy to find and cheap/good selection. adaptors are easy if know what your doing. I would segest getting them cnc plasma cut. Quote Link to comment Share on other sites More sharing options...
Gaz Posted February 4, 2012 Share Posted February 4, 2012 What did you do to fit the disc again? Should do a write up Jase. Gaz Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted February 5, 2012 Share Posted February 5, 2012 Ohh it's a bit arse about face, slips over studs, then 27mm spacer/ adaptor then wheel. Prob do it different next Time. Quote Link to comment Share on other sites More sharing options...
Roman Posted February 7, 2012 Share Posted February 7, 2012 I would us nissan or mazda stuff now. hilux is sooo heavy. Nissan 4 pot setup is HALF the weight of my previous twin pot setup. Heaps easier to change brakepads too! It's win win. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.