J-Calico Posted January 9, 2012 Share Posted January 9, 2012 Hey John, who was initiating the group buy of G4's? Need one more buyer to sort it right? Could be keen... Also, Tell them what motor you've decided on you sacriligous bastard! haha Quote Link to comment Share on other sites More sharing options...
CXGPWR Posted January 9, 2012 Author Share Posted January 9, 2012 Yeah man, The workshop im at now is the group buy of G4's Yeah one more buyer would be ideal, Also 13B *some kind of ported* Turbo is the engine, as its FREEEEEEEE (the besst kind) Not sure if it'll be bridge, or just a nice stage 2 Quote Link to comment Share on other sites More sharing options...
EURON8 Posted January 9, 2012 Share Posted January 9, 2012 Yeah man, The workshop im at now is the group buy of G4's Yeah one more buyer would be ideal, Also 13 BP T is the engine, as its FREEEEEEEE (the besst kind) Price? Also, that motor doesnt exist. 13B Bridge port turbo? or just 13B turbo? How you get that free yo? Quote Link to comment Share on other sites More sharing options...
Truenotch Posted January 9, 2012 Share Posted January 9, 2012 He's working free saturdays for the rest of his life. PM'd you guys about ECU's . Quote Link to comment Share on other sites More sharing options...
CXGPWR Posted January 9, 2012 Author Share Posted January 9, 2012 13B Bridge port turbo Quote Link to comment Share on other sites More sharing options...
Dell'orto Posted January 10, 2012 Share Posted January 10, 2012 Nice. Make sure its a full bridgey too, none of this semi bridge shit. Also water galleries are for pussies, I suggest you cut right into those also Quote Link to comment Share on other sites More sharing options...
KKtrips Posted April 30, 2012 Share Posted April 30, 2012 Do I remember you saying that this came from a Ford Mondeo?? What diameter is the bearing surface and inner sleeve? I'm wondering if it will work with a clutch pressure plate for my 1UZ.. Also what size bore is the clutch master cylinder? It looks like it says 3/8 but its a touch hard to read... Lastly - how much throw do you have on the bearing? Quote Link to comment Share on other sites More sharing options...
CXGPWR Posted June 21, 2012 Author Share Posted June 21, 2012 Do I remember you saying that this came from a Ford Mondeo?? What diameter is the bearing surface and inner sleeve? I'm wondering if it will work with a clutch pressure plate for my 1UZ.. Also what size bore is the clutch master cylinder? It looks like it says 3/8 but its a touch hard to read... Lastly - how much throw do you have on the bearing? Wow! Sorry KK, Did not realise you had posted in this Yes, came out of a 1997 Ford mondeo, 2.0ltr wagon from pick a part! I had to modify it quite a bit to make it work but in the end it gave me a total of approx 20-25mm of travel, the piston cylinder diameter is 32.5mm id, 42.4mm od the id of the sleeve was 30.3mm You most likely already have this information now! Quote Link to comment Share on other sites More sharing options...
Dr Bojangles Posted August 2, 2012 Share Posted August 2, 2012 Good to see its getting worked on now, kinda regret selling it haha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.