Can bike carbs handle a charge?

[d.p.n.s]

^ true

ive had a few turboed bikes manily using the dirty old mikuni carbs

and they have worked well

but have had a lot of mate in the u.k that have used r1 carbs on theyer

turbo drag bikes.

so yeah go for it mate

[Simon]

box

go back to your RB powered aydubs and leave this the the real men

lol piss off.

I was summarising wall of txt.

If I were to boost any carb it would be with a box for reliability anyway.

[eke_zetec_RWD]

how are you controlling the ignition timing?

[anglia4]

thanks for the input bubblegoose!

I'll be running a megajolt for the ignition side of things

[Ogre]

Ive been thinking of doing this with my 4g63 and r1 carbs also.like 10psi or somthing.from what i have read it seems the R1s are the best.

[bubblegoose]

thanks for the input bubblegoose!

I'll be running a megajolt for the ignition side of things

do you have one i know where theres a spare

[anglia4]

yup got the megajolt all sorted and in my bedroom back home. Dad built it, so its untested but hopefully will work!

Am sourcing my bike crabs at the mo

[eke_zetec_RWD]

yup got the megajolt all sorted and in my bedroom back home. Dad built it, so its untested but hopefully will work!

Am sourcing my bike crabs at the mo

megajolt, are they 100 percent tunable like a link? is is based on tps or map? 2d or 3d maps?

supercharging with throttles after the supercharger make tuning quite hmmmm important to get right. and 3d maps would help

alot!

[Spencer]

^ you would need a MS2 for 3d maps as far as I'm aware

[anglia4]

The megajolt i've got has TPS and is 3d mapping.

[Spencer]

3d isn't really the correct term does it do blended alpha N & speed density? basically you use two maps and add or multiply them depending. Might download the software and see, I always thought it was just a chopped down MS1 like the B&G version was going to be, but turns out its different. They have a horrible website

[anglia4]

3d isn't really the correct term does it do blended alpha N & speed density? basically you use two maps and add or multiply them depending. Might download the software and see, I always thought it was just a chopped down MS1 like the B&G version was going to be, but turns out its different. They have a horrible website

Whats the definition of 3d mapping? The autosport labs website does say they are 3d but are they maybe a borderline version of it?

I haven't done alot of studying on the subject yet coz im along way from ever wiring it up or starting the car. From what i gather though you map the revs on one axis and tps on another and then give it an advance for each coordinate. i think then you can also change it so that it alters the advance for different temperatures as well but not so sure on that one.