Simon Posted July 28, 2009 Author Share Posted July 28, 2009 Yeah they fit nice. TEX tried to give me sw20 sway bars. I didnt take them cos he gives me enough. Was like why would i ever want them... Now hes on the other side of the world Not hard to come by though. Was thinking about using another old disk and cut it up to make that spacer for the rear brakes lol. Surface grind both sides to get flat. Havnt measured though. Quote Link to comment Share on other sites More sharing options...
thegreatestben Posted July 28, 2009 Share Posted July 28, 2009 Facelift front rotors are 6mm thick. Tried sifting through pile of old rotors but most people that bother to do rotors don't have 4x100 Quote Link to comment Share on other sites More sharing options...
Simon Posted November 1, 2009 Author Share Posted November 1, 2009 Still 4age powered though. Should be updates in the next few weeks RE: 3sgte. Quote Link to comment Share on other sites More sharing options...
mixmasterlex Posted November 1, 2009 Share Posted November 1, 2009 middle pic is super sweet. Quote Link to comment Share on other sites More sharing options...
cheater_5 Posted January 26, 2010 Share Posted January 26, 2010 this^, do it Quote Link to comment Share on other sites More sharing options...
Simon Posted January 26, 2010 Author Share Posted January 26, 2010 Hot! Nice photoshop. AW = 4x100 too. Also 3sgte sump, gearbox and exhaust all hang down way further than 4age so current ride height may be where it has to stay. Wont be too concerned because the other car has the job of getting stuck on man hole covers. And you never see low AW11 because the half shafts hit the chassis at heaps of slam (not that i have tried this). Because the 3S box is lower it may even semi fix that problem. But ill have coilovers eventually... All that wont stop me trying! Quote Link to comment Share on other sites More sharing options...
cheater_5 Posted January 27, 2010 Share Posted January 27, 2010 Those are all horrible excuses/yeah I know I looked ages ago at that rear end. What a retarded chassis rail it is. Still, will a bit of chopping and welding there is no reason why it cant be that low. Quote Link to comment Share on other sites More sharing options...
Truenotch Posted January 27, 2010 Share Posted January 27, 2010 Those are all horrible excuses/yeah I know I looked ages ago at that rear end. What a retarded chassis rail it is.Still, will a bit of chopping and welding there is no reason why it cant be that low. But why ruin it??? There's no point doing that shit cause it will handle fine without it. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 17, 2010 Author Share Posted February 17, 2010 So Markku convinced me to do Road and track at Manfeild on Sunday. Bought 2 new tyres - Really for the corona but will fit these wheels. Will mount fire ex Wheel alignment Will try and fit the hilux master cyl too by drilling holes in places they dont exist. I hope it will work with the PF master cyl. $60 for a lot of track time... ... Full track and I'v never driven it before. How could I say no. If the car goes well Ill send Jarred money for track day haha. Mint photograph too Markku. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 19, 2010 Author Share Posted February 19, 2010 So yeah The updates on this will either hault or be real fast from now on. A mate who can remain anonymous drove us through fence, down bank and into tree. Bent chassis rails that will straighten and Iv got a whole nother car to rape parts off. Drive safe. Quote Link to comment Share on other sites More sharing options...
thegreatestben Posted February 19, 2010 Share Posted February 19, 2010 Oh snap. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 19, 2010 Author Share Posted February 19, 2010 Oh snap. lol it snapped back hard. Would have been a sweet drift too. Just pretty happy we both walked away. Could have been way worse. All part of the game. Quote Link to comment Share on other sites More sharing options...
lowlancer Posted February 20, 2010 Share Posted February 20, 2010 Guts. Fucking midships Quote Link to comment Share on other sites More sharing options...
Simon Posted February 20, 2010 Author Share Posted February 20, 2010 Broken nose. Will put it on the chassis jig and pull the rails out. Will never know. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 20, 2010 Share Posted February 20, 2010 chassis rails are surplus to requirement cut old ones off donor car? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 20, 2010 Author Share Posted February 20, 2010 chassis rails are surplus to requirement cut old ones off donor car? Nah pretty sure they will bend back. Anything forward of the bulkhead is just there to hold things any way. I drove it home, drove mint lol. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 20, 2010 Share Posted February 20, 2010 yeah doesnt look all that bad, im just generally lazy with hammers and keen with welders now is the time for fender braces id say Quote Link to comment Share on other sites More sharing options...
Simon Posted February 21, 2010 Author Share Posted February 21, 2010 I have just decided how I'm going to fix the rusty guard problem and make all this work worth it. 240z bolt ons RWD offset 15x8's. Fuck you world Im doing it. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 21, 2010 Author Share Posted February 21, 2010 Flares are $150NZ on YJA so like $50 to ship them? maybe more for shipping. Could get carbon fiber ones Quote Link to comment Share on other sites More sharing options...
Truenotch Posted February 21, 2010 Share Posted February 21, 2010 Pics of skidmarks please.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.