Jump to content

towing torque not talk...


shizzl

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

see my stocky is 1440kg,id take atleast 6 wheels with tyres.

airtank,toolchest,jack,axle stands,spare hubs and axles.

fuel containers,spare wheel gates etc..

so the trailer alone with all that on it will weigh atleast 2500kg.

so itll need to be a tandem sprung braked trailer.

cant get one for under $3000 basically for a decent one.

so im more thinking along the lines of a small truck rated to around

4500kg GVM,truck will weigh in around 2-2500kg depending on what it is.

will look for one with an exhaust brake :wink:

i have an exhaust brake sitting under my bench but not too sure

how to plumb it up so itll work as an exhaust brake..

Link to comment
Share on other sites

mk2 truck,rated to 4430kg,dual wheel diff,massive drum brakes,but 2L pinto power..

has a bellhousing to fit a holden 6 to the current toyota box thats in it.

ah ok so it would be a low comp pinto with transit gearing.

i personly dont think it would be good at towing what you want to tow tbh

Link to comment
Share on other sites

  • 2 weeks later...

Bro. For towing a stockcar use either a Ute van or 4wd. Transit would be ok but not really ideal.

I used a L18 720 for a while, towed well but was pretty much a fail up hills. Went to a Hiace 2.2 petrol which did the job better. my brother uses V6 Hilux and old man uses Jep cherokee.

be aware that they push you all over the place and take your time. If it aint balanced on the trailer it will sway like fuck.

Link to comment
Share on other sites

best 2 towing cars ive owned were a ea falcon 4.1 auto and a vl commonwhore 3l manual

both can be picked up cheap(falcon very cheap) and go for ever my falcon was just under400.000ks and didnt even feel like you towing anything.(pulled like a school boy)

dan

Link to comment
Share on other sites

thats a bugger cos a bedford van would be my choice with say a mid mounted 3208 cat and a 13spd rr would be fuckin mean v8 sound with enough torque to twist the van like a wet sock,

plus huge bi inlet turbo dealio has an insane inlet noise

Link to comment
Share on other sites

  • 2 weeks later...

Don't get to stressed if the guages in your Trader play up man its factory.

Just keep the oil and water levels all good and make sure your fan belt is kept tight and it will run mint.

Change all of your exhaust studs when one of them brakes and thats about it.

They are good little trucks really and a lot of Mazda titan stuff is the same.

United Truck Parts in Takanini has every part you can think of for them at a good price too.

Corey

Link to comment
Share on other sites

cheers dude..drove it home yesterday from temuka,up to chch,then down through arthurs pass.

sits on 100kph easy,but no exhaust brake going down otira sux balls....dont

wanna do that with a stockcar on the back :?

it pops out of 3rd sometimes,but its sweet if you hold the stick up in 3rd,so i guess

the detaunts need to be checked..

ill also need to check the throttle return springs too cos when you change gear it doesnt

return to idle it just keeps revving away...its fukn annoying

as for ramps,i will not need to make them,the sideboards are made from 40x40 3mm rhs by the

looks,so plenty strong enough,but i will get some 25x25 angle to brace the board,and make

a ramp pin to lock it to the deck while loading.

overall im stoked with the truck,its got a brand new COF,reg til Nov,new glow plugs,

just been serviced,had 2500kms extra RUC,but ive used half of that driving home.

and the heater is awesome..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...