WARTYM Posted January 25, 2008 Share Posted January 25, 2008 best to look around, repco, supercheap you know the places...... Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted January 25, 2008 Share Posted January 25, 2008 Cheers bro, might do the phone around this arvo, walking is still out of the question haha. Quote Link to comment Share on other sites More sharing options...
Dell'orto Posted January 25, 2008 Share Posted January 25, 2008 Repco dont sell POR15, I just bought it straight from the supplier, Permanent Painted Coatings. Cost me $42 for 1l from memory Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted January 29, 2008 Share Posted January 29, 2008 Would this stuff be suitable to do the whole underside of the dx, or am I better using underseal? And would one 1litre tin be enough to do the whole underside? Cheers boys. Quote Link to comment Share on other sites More sharing options...
WARTYM Posted January 29, 2008 Share Posted January 29, 2008 not too sure i'd use chipseal, but por15 is very good as it comes out very smooth and glossy good for parts put not the underside of the car...... Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted February 11, 2008 Share Posted February 11, 2008 Ahaha cheers Mutiny. Is that while you still had the springs in the front? Coz fuck thats on its ass... Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 6, 2008 Share Posted March 6, 2008 Hey does anybody know if the Techno Toy Tuning RCA's for the ae86 will fit the struts from my 83 dx sedan? Seems pretty damn close, but real world knowledge would be appreciated. Even if you could point me in the direction of somebody who would know would be cool... Quote Link to comment Share on other sites More sharing options...
tortron Posted March 6, 2008 Share Posted March 6, 2008 not too sure i'd use chipseal, but por15 is very good as it comes out very smooth and glossy good for parts put not the underside of the car...... iv seen alot of vw guys paint their floor pans with it (both sides) = never rust again, id probaby coat the underneath with chipseal/deadner stuff for sound/not gloss looks Quote Link to comment Share on other sites More sharing options...
Dell'orto Posted March 6, 2008 Share Posted March 6, 2008 Hey does anybody know if the Techno Toy Tuning RCA's for the ae86 will fit the struts from my 83 dx sedan? Seems pretty damn close, but real world knowledge would be appreciated. Even if you could point me in the direction of somebody who would know would be cool... Get the KE70 ones I got some to fit mine, but I've got later model wagon struts too. If I get around to pulling the front struts out this weekend I'll let you know for sure. Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 6, 2008 Share Posted March 6, 2008 Hmm fuck it,yeah I might just buy some ke70 ones out of the states, the dollar is so good at the mo its worth just gettin new ones... Quote Link to comment Share on other sites More sharing options...
Dell'orto Posted March 19, 2008 Share Posted March 19, 2008 Argh, I had rust in that spot too, but only on the drivers side thankfully! But it'd rotted out quite a decent section. Hardly surprising though, water would pool up in there something wicked. Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 19, 2008 Share Posted March 19, 2008 Yeah the guy failed to mention that when I was buying it Seeing as Im not going to be running the standard heater, Im thinkin I might just weld up the vents on the wiper tray so water cant get in there in the first place... Quote Link to comment Share on other sites More sharing options...
rot808 Posted March 19, 2008 Share Posted March 19, 2008 fuck, this is going to be fully hektik Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 19, 2008 Share Posted March 19, 2008 Cheers bro, heres hoping... Hows your project goin? Quote Link to comment Share on other sites More sharing options...
kecam Posted March 20, 2008 Share Posted March 20, 2008 Keep an eye on the chch scene, there is gonna be a few crazy OS toyotas popping up in a while... Seems like it I'll start a project thread up for my ke its nearly done Quote Link to comment Share on other sites More sharing options...
rot808 Posted March 20, 2008 Share Posted March 20, 2008 Cheers bro, heres hoping...Hows your project goin? who me? which one haha you planning anything to do with the internals of the motor or just putting it in and hope it runs mint situation Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 20, 2008 Share Posted March 20, 2008 Well the sev in particular, wats the future plans for that? Um at this stage I think Il just drop the motor in, its got a start up with it so heres hoping I have a second s5 engine Im looking at rebuilding/porting/doweling and then dropping in later. But having trouble deciding whether I get a bigger turbo/injectors/manifold/wastegate, and doing that from the start or leaving it until I drop in the rebuilt engine. Argh fuck knows! Quote Link to comment Share on other sites More sharing options...
rot808 Posted March 21, 2008 Share Posted March 21, 2008 rx7 is just standard for now, does the job so far so i will refrain from playing too much, otherwise it might break yeah even a standard motor in the dx with the suspension you have planned would be fun as i reckon, then once your bored of that drop the flash engine in and have more fun Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 21, 2008 Share Posted March 21, 2008 Yeah thats what I keep telling myself, but... Quote Link to comment Share on other sites More sharing options...
nothingsfree Posted March 21, 2008 Share Posted March 21, 2008 Keep an eye on the chch scene, there is gonna be a few crazy OS toyotas popping up in a while... Seems like it I'll start a project thread up for my ke its nearly done Yeah Il see if I can find a pic of the workshop, but basically in there at the mo is... -My dx with 13b turbo. -Ke30 with 13b and big fuck off turbo! -Ae85 with Beams 3sge -Ae85 with Ca18det Hopefully by next summer they will all be on the road, hopefully... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.