Hemi Posted February 17, 2007 Share Posted February 17, 2007 go to any enginerring or trade store , they can get good ones in Quote Link to comment Share on other sites More sharing options...
excort Posted February 17, 2007 Share Posted February 17, 2007 ripco ? Quote Link to comment Share on other sites More sharing options...
Hemi Posted February 17, 2007 Share Posted February 17, 2007 i dunno what they can get but id prefer a proper trade supply shop (tradezone , enginering supplies etc) either way they all break down real quick , specially if you try sticking them in hole that are too small ( they grab and explode) Quote Link to comment Share on other sites More sharing options...
Raizer Posted February 17, 2007 Share Posted February 17, 2007 ripco ?NoBNT can do good ones, steel and tube/other trade supply stores Quote Link to comment Share on other sites More sharing options...
nismo.capri Posted February 18, 2007 Author Share Posted February 18, 2007 I used to be able to buy the Standard abrasives porting kit that had the same stuff as that guy uses but the place I got them from stopped selling them http://www.amazon.com/Standard-Abrasive ... B000A8OK0S Quote Link to comment Share on other sites More sharing options...
Ogre Posted February 18, 2007 Share Posted February 18, 2007 wow that gearbox looks mean.I wonna do it to mine b4 i put it in.Must take along time to do tho?How long would it last? Quote Link to comment Share on other sites More sharing options...
mikuni Posted February 18, 2007 Share Posted February 18, 2007 So could you get an alloy gearbox blasted it would be alright? I don't like pollished finishes at all but I like the look of the rough machined look that blasting gives it. Quote Link to comment Share on other sites More sharing options...
Snoozin Posted February 18, 2007 Share Posted February 18, 2007 Should be fine, just block up any holes etc you don't want blasting media going into. It'l be what I'll end up doing to my gearbox as well I'd say. Quote Link to comment Share on other sites More sharing options...
Ogre Posted February 18, 2007 Share Posted February 18, 2007 hmmm, i scrubbed mine hardcore with drgreaser and wire brush but never came up as good as that blasting Quote Link to comment Share on other sites More sharing options...
mikuni Posted February 18, 2007 Share Posted February 18, 2007 hmmm, i scrubbed mine hardcore with drgreaser and wire brush but never came up as good as that blasting Yeah and its a shit load more effort. Do any vehicles have alloy live axels or do they all use cast steel ones? Quote Link to comment Share on other sites More sharing options...
Ogre Posted February 18, 2007 Share Posted February 18, 2007 never seen an alloy one eh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.