craig_b

find me somewhere to live, then we will go party at the casino

sorted

McMassive bonfire and home brew liquor?

kart track, yes, yes there is

+ 1, we use them through work and are very well priced, and know a few people that have walked in off the street and got very good prices for systems

fishing for hookers in the avon? yes please

is there any other ridiculous activites chch can support?

without brutal punishment am i allowed to ask if anyone in chch is even building or built a velo bike other that 427carguy ?

providing i have found somewhere to live, i would be keen to go for a look at akaroa as ive never been there. timaru has one at the caledonian grounds dosnt have very big banked walls though, unsure if temuka has one? is there none in chch / ashburton? edit; denton park, temuka (http://cycling.isport.com/cycling-velodromes/nz/-/temuka/temuka-domain-velodrome-936699) any chance of getting onto that little track out front of ruapuna by the road?

"Hanging around the mens toilets in hagley park", i there just 1 toilet block or multipul and we get to vist them all?

not sure where your located, but if you wanted to do a roadie just get a trailer from hirequip on friday after 3pm and have it back by monday 9am and you will only pay 1days hire

sorry man is a no go

where can i get my wheel bands polished to the state yours are at

i could possibly be going down this weekend, depends on flatmate, wont know till friday though going down friday night or sat morning and coming back sunday late afternoon/evening

dose auckland not have cats? pretty big mission for a cat isnt it?

yup its all running, now i have 3 issues to sort out, 1) theres no boost - can hear turbos working but no pull, feels no better than 1ggeu. will get my hands on a gauge at some stage to see whats going on, feels like its working hard but going no where like its pulling a 3tonn trailer 2) wont turn off when key is turned off. 3) has misfire,idles sweet, but will miss when putting load on- dosnt seem to be miss firing now 4) water temp gauge dosnt work but at least its running now and thats progress

right so have spark,have fuel when fuel pump hard wired, i think i know why it isnt going, theres 2 wires that come out of the ecu, pin 11(even injectors) and pin 12(odd injectors), these each split into 3 wires, 3 for odd and 3 for even injectors, on the other side of the injectors both even and odd turn into 1 wire and end up at a plug under the dash, how do i find out where this one is ment to go? http://www.supra.co.nz/1g/1ggte_gen_3_1_0001.jpg this says it goes to the ignition switch, so if i was to put 12v to this wire it should fire up?

i will once the 1ggte is running

right i am back from aussie now, need to get this going, tried jumping the fuel pump, still wouldnt fire up, unsure what the problem is here, will this be something stupid? am thinking i might have to try find a auto sparky to come get this sorted for me as starting a new job tomorrow and am going to have little to no spare time now which sucks

so with the 1ggte afm pluged in and key on i push the flap open and pump dose not come on, with the 1ggeu afm conneced to the 1ggeu loom plug i can push the flap and the pump will start up, so i need to figure out what wire this is on the 1ggte afm plug and same with the 1ggeu afm plug and splice them together. cam i hook up both afm's to see if it will fire up? hooking up the 1ggeu to get the fuel pump running and the 1ggte afm to give the necessary signals to the computer so it will fire up?

i also had my race quad insured, it was through westpac, actualy that reminds me that i havnt cancled it yet and sold my bike a month ago haha

been told the drags arnt running today.... is this true?

right, so BATT, IG, +B1, +B, M-REL, STA, NSW, are all hooked up, i have ignition but no flammible juice, cant hear the fuel pump working with key on but there is a plug by the old afm plug that is a fuel pump test wire, ive hooked that up to get the fuel pump to work and it still wont fire up, whats missing?

depends what part of town you are in, i have always used uniweld on main south rd through work and never had any troubles and are pretty reasonably priced

just #10 and #20 on this sucka, ill hook up the sta pin tomorrow, hopefully it will work?