HighLUX

You will be fine. Sshhhhh just cum and come I had 0 road experience before hopping on the scooter last year and just getting into it

Fuuuuuu fizzing for this now its getting closer to November. Just need rings to show up then its run in and tune. Then add light bar dirtbike tyres and USB charger somewhere

Coming round the coast in November KK?

@sentra is sue still coming along?

In like flynn

Stanley rd sunset special stage on Thursday evening

Vasalene for assembly lube or just lube?

Video of 2t braaaaaaaps please

FYI those mounts will not pass cert as having 1 bolt from chassis to engine classes them as solid mounted

Shit dont come easy

Quick squirt of hi temp paint on the barrel and in the paint oven to help cure it while I strip the old barrel off

YES BOY

Exhaust has shown up and its sweet. Much bigger than the punny 50cc one and nice chamber shape. Doesnt quite fit though. Fouls on the fins on the head so they will need a grind down and head pipe needs a tweak down to suit what must be a slight difference between aircooled 50cc and watercooled ts80 barrel. Will see how it lines up with 70cc barrel when that gets here by the end of the week then mod.

Shit yeah theres a nice couple of spots to harvest some delicious wares of the ocean if the swell plays ball. Will get chainsaw sorted so we can cut firewood to run the outdoor fireplace at the bach on the Saturday night. Also if anyones keen to add a bit of extra adventure to the weekend I plan on running this route on Thursday arvo and return on the Monday sometime. Plenty of space to park at my place over the weekend which is not for from the starting point https://goo.gl/L2FSLu

Keep putting more kms on this and it seems to be running better and better GPS confirmed top speed of 61.5kph so far. Only done 350kms total so its hardly run it yet Has a leaky 2t pump as makes sweet smoke screens once started after sitting for ages

Shit yeah

No good for dropping a gearbag or diff out

Yeah it should be the same/any 80s cold start injector toyota one will work for the low price of $2 from PAP. It should have a part # hiding somewhere on it too. A pm to @CorollaGT might help if you want new from toyota

Good to hear! Coolant sensors can be had new from Toyata for a decent price if you want to get it working again

Are you still out Paengaroa way? Ethan at P3 steelworks might be a go for tig welding the exhaust. Find them on fb and flick him a message

Ahhhh smokey sue you still lookin fine

Cold start injector time switch/coolant sensor thing fuuu'd out so its just dumping in fuel from the cold start injector all the time

Iv put close to 100kms of reliable ringadings on this now its running sweet enough to brave a bit of highway riding so I can get to the beach. Its sweet in town for brapping over roundabouts and not lifting on speed bumps Airsal 70cc kit should be here by the end of the week hopefully and exhaust/spanny kit from ebay by end of the month . Did a bit of research/parts # googling and found out the only spanny/exhaust kit available for these is made by Giannelli, sample picture on webike got me all excited that it was gunna be something lush and shiny with pretty welds but turns out it looks like a factory chamber with a slightly different muffler. Not the end of the world but shiny would of been better because shiny. Decided to get one for TS80 and gamble with maybe just needing the head pipe modded to fit the non water cooled barrel, should go good on the 70cc barrel with a good tune after its run in

Yep managed to sling a bit of junk off to the punters. Fullas next to me had it sorted though, vintage sthil and husky chainsaws are hot sellers in vegas

Make sure you keep.your Mustang restrained in large crowds