tortron

lush idea however are you sure the 2 paints wont react badly

it totally does/do it outside also you cant legally spray it in your back yard/shed

dry sump - hanging out grill for lols but wut @ ride height

this is partly true - but its more work when its fully hard just be careful not to wear through

haha - yea can do it as soon as its touch dry if you really wanted 3 days is generally the best time to cut and polish/wet sand a new paint job before it gets too hard - takes about a month for paint to be fully set

at least 3 days

looking at getting my sill covers and finishers powdercoated rather than painting also my wheels and carb manifolds. Possibly a bunch of other stuff as i go through my boxes of parts questions can lead/bog/primer be powdercoated over. I have a feeling the melting point of lead will be a problem in the oven. going prices? should i just paint?

can get proper oil sewing machine oil is too thin when warmed up i roll engine oil for max economy/it says in the book to do that

know anyone with a gas welder? would take all of 15 mins to swap the outlet sides over

one of the first reviews of the minor compared its aerodynamic shape to that of a boiled egg couple that with the fact that this colour is pretty close to a standard colour at the time and you can guess why

had a problem with the minor running on and being a pig till high revs The mechanical advance weights had gunked up and frozen in a well advanced position - once cleaned it was fine. carbon/decoking probably isnt the problem - slam a couple of cups of meths in the fuel tank next time you fill up and itl get sorted

mig isnt shit its point and shoot stz - if i can do it

kkks horns are over your fence by the mail box

cone^ minor fuel lines run between the firewall and the exhaust - not the best

mechanical?

oi kkkzizle come pick up your air horns

i did pretty much what you are wanting to do with my minor hit it with some zinc primer as standard primer is shit at protecting anything

places like apex brake and clutch can solder the end back on, or make a new one for less than $30 but if its like that one above just roll a bike cable

what car is this hopefully its running S.U's in which case you can buy some jets off rusty

free'er flowing so yuh or just stick the pod filter out your bonnet

i suggest putting a good quality "performance" replacement filter in your airbox

fridge door + pop rivits + glue the carpet down + underseal worked on my mums beetle

swapped out the clutch and its mint again almost lifts the front on changes to second

will see how things pan out with certain watchlist items

used it on the piping around my back seat no signs of wear/cant scratch it off - so yea dooett