Table saw/joiner needed

[Sorensin]

Hey people, i need to cut three pieces on wood which are 1.8mtrs long anything between 55-60mm(currently 70).

Would greatly appreciate someone who could help with this for cash or beers?

Thanks

[brendon]

Where are you located mate, can do no worrys if your in palmy

[Seedy Al]

uncle jake might be able to help.

but I didn't say anything

[igor]

Have you considered the old school method with a rip saw? Will take a while but not impossible. Can remember grandfather hand ripping demolition rimu 6x2s to get 3x2s for the purlins on the shed we were building. One does some strange things when one has plenty of time but little money.

[DrSassafrass]

I'm about 20mins from pukekohe if you are in the area and I have all the saw you can handle

 

Puke is a looong way from wellington though

Edited October 12, 2015 by DrSassafrass

[Unclejake]

I can do it one afternoon this weekend (depending on how thick it is) if you can wait that long. My shed is near Owhiro Bay

 

My gear will only cut 91mm deep on a single pass and needs one straight edge to use as a ripping guide.

 

Alternatively, I have access to a rail saw that'll do laser straight cuts on timber with a wonky edge, but that will only cut 48mm deep, and I'll need to borrow it from its owner.

 

Both options require the timber to be nail and screw free (I only just got the table saw back from having it rebuilt after hitting nails)