rob.121 Posted January 26, 2015 Share Posted January 26, 2015 Hi all, Iam after some advice. I have a garden trailer with 13" 5 stud wheels from a 1964 Ford Zephyr. Does anybody know what modern and easily available rim i could get to replace these original ones with (they have bad rust) I was thinking maybe a 90's Telstar or mondeo? I have noticed they are also 5 stud and plenty around. but i am only guessing here. offset is not important at all. any advice much appreciated cheers! Quote Link to comment Share on other sites More sharing options...
igor Posted January 26, 2015 Share Posted January 26, 2015 Try 14" Falcon rims if they fit under your guards. I'm pretty sure the older Falcons where the same stud pattern as the Zephyrs. The new ones might be too for all I know. Quote Link to comment Share on other sites More sharing options...
smokin'joe Posted January 26, 2015 Share Posted January 26, 2015 any idea of the PCD ? is the 5 stud Coon ryums fit, then they would be 5 x114 making them very common, the early coons were 4x114, still very common. if 5 x108 then early Holden would be a source. Quote Link to comment Share on other sites More sharing options...
insanebrain Posted January 26, 2015 Share Posted January 26, 2015 We had a trailer with zeph rims about 20 years ago. We replaced them we xd falcon rims to match our tow car at the time Quote Link to comment Share on other sites More sharing options...
governorsam Posted January 26, 2015 Share Posted January 26, 2015 hiace and 2wd hilux should fit too. Quote Link to comment Share on other sites More sharing options...
yetchh Posted January 26, 2015 Share Posted January 26, 2015 5x114.. put some 2013 Nissan qashqai steels on my Zephyr, so they def work 1 Quote Link to comment Share on other sites More sharing options...
igor Posted January 26, 2015 Share Posted January 26, 2015 We need a new thread for listing what wheels fit what else. Quote Link to comment Share on other sites More sharing options...
rob.121 Posted January 26, 2015 Author Share Posted January 26, 2015 Thanks fellas, sorted! just took a wheel off and looks to be 5x114mm pcd, so theres a few easy & common suggestions there il have a look on the Tard for something suitable! cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.