NVMPAJ Posted February 8, 2014 Author Share Posted February 8, 2014 Well a double blonde moment yesterday , I did actually film a brief drive of the first test drive http://m.youtube.com/watch?v=ex6I7yKDu60 1 Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted February 13, 2014 Author Share Posted February 13, 2014 Power steering .....I hope Ive fixed , will do another loud road test tomorrow. I found jacking the car off the wheels and turning the steering from lock to lock ,then shutting down , caused a nice big bubble of air to escape from the reservoir . Still to do: Exhaust Driveshaft loop Oil leak from remote filter set-up Move fuel pump (too loud where it is) Stereo Cert and WOF Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted February 15, 2014 Author Share Posted February 15, 2014 Another test , power steering pump is abit noisey. Same with fuel pump. Idle is good ,as is oil pressure , water temp to (found dash and triple gauge water temp earth wasn't the best all good now tho.) http://m.youtube.com/watch?feature=em-upload_owner&v=7jwKu06Cxso&desktop_uri=%2Fwatch%3Fv%3D7jwKu06Cxso%26feature%3Dem-upload_owner 1 Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted March 8, 2014 Author Share Posted March 8, 2014 http://imageshack.us/a/img812/7105/7bnt.jpg Right back again , have trial fitted the driveshaft loop just need to drill some holes in the floor and bolt it up . Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted March 25, 2014 Author Share Posted March 25, 2014 Quietened the fuel pump down a bit with a better mounting kit. Also mounted the filter along side instead of the engine bay. Sorry no pics , cos you cant see it. will put some sound deadening stuff in the back , then should be fine. Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted April 24, 2014 Author Share Posted April 24, 2014 Still pottering away, brakes were playing hard to get , turns out the vacuum pipe was the wrong way round ! The pedal has a bit of travel but they work. Have loaned a mig welder so wil try my hand at making the exhaust up . Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted May 16, 2014 Author Share Posted May 16, 2014 Did some work on the exhaust ,welding is a little hard when you don't know how!! http://m.youtube.com/watch?v=T-lxn0srv6c 1 Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted June 28, 2014 Author Share Posted June 28, 2014 https://m.youtube.com/watch?v=paBcp4Cif7Y&feature=em-upload_owner Well a few jobs done , motor running a lot quieter now power-steer is much more quieter . Thin a wee bit of oil and it'll be fine . Fuel pressure and vacuum pressure gauges fitted . Still have an oil leak , will have to remove the oil filter adaptor and check everything out. 2 Quote Link to comment Share on other sites More sharing options...
NicT Posted June 28, 2014 Share Posted June 28, 2014 Oil leaks are factory. Good job on getting it all going 2 Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted June 28, 2014 Author Share Posted June 28, 2014 Haha not this leak , it's like jedd clampett discovering black gold !! Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted January 27, 2015 Share Posted January 27, 2015 Shame you are selling up. http://www.trademe.co.nz/a.aspx?id=839646346 Would be dead keen if I didn't already have so many other projects to complete. price seems sharp. Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted January 28, 2015 Author Share Posted January 28, 2015 Finding time to finish is the problem , but am thinking probably best to have it roadworthy to get more interest . If she doesn't sell this time , I'll have to get off my proverbial ! Quote Link to comment Share on other sites More sharing options...
NVMPAJ Posted February 1, 2015 Author Share Posted February 1, 2015 SOLD it today , am happy to answer the best I can if anyone's interested Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.