Berjjj Posted September 27, 2014 Share Posted September 27, 2014 Thanks man, that would be great. Have it mostly figured out but any information is invaluable. Quote Link to comment Share on other sites More sharing options...
Sambo Posted April 5, 2015 Share Posted April 5, 2015 Did it come out through the top in the end? Thanks man, that would be great. Have it mostly figured out but any information is invaluable. Quoted for notification. Quote Link to comment Share on other sites More sharing options...
Berjjj Posted April 5, 2015 Share Posted April 5, 2015 Yeah man through the top, getting the LCA's disconnected became a major ballache so I'll kill them with fire at some point today. 1 Quote Link to comment Share on other sites More sharing options...
Sparkle Posted June 25, 2015 Author Share Posted June 25, 2015 shit it looked rad! 1 Quote Link to comment Share on other sites More sharing options...
Mr Vapour Posted June 27, 2015 Share Posted June 27, 2015 Hay man Had a big chat with Brent the other night, top bloke, looking forward to seeing his car come together. He said u were getting his 323 motor. Good work on that. Looking forward to seeing another e21 on the road again. If I can help in any way just yell out. I'm keen to see how your coil overs ride on the street. Are you planning on doing the disc rear end swap when you do the sub Frame? I have been looking at rear disc conversions using the drum hubs turned down to fit in a vw disc with a vw calliper and custom bracket. Able to be fitted on to drum trailing arms. Easier than the rocking horse poo factory discs. Quote Link to comment Share on other sites More sharing options...
Berjjj Posted June 27, 2015 Share Posted June 27, 2015 shit it looked rad! Yeah once! It will be ready for Nats '16 I promise, then we can have e21 races yeah? Hay man Had a big chat with Brent the other night, top bloke, looking forward to seeing his car come together. He said u were getting his 323 motor. Good work on that. Looking forward to seeing another e21 on the road again. If I can help in any way just yell out. I'm keen to see how your coil overs ride on the street. Are you planning on doing the disc rear end swap when you do the sub Frame? I have been looking at rear disc conversions using the drum hubs turned down to fit in a vw disc with a vw calliper and custom bracket. Able to be fitted on to drum trailing arms. Easier than the rocking horse poo factory discs. Yeah Brent is a top man, and that car is going to be ridiculous when done! Going to be using his 323i motor while I build the 2.8 (long term, needs cash injected that I don't have). Happy to give you a ride when it's back on the road, I'm sure Sparkle will attest to this, they're nothing short of brilliant. Going disk rear end yeah, I lucked out and grabbed all the bits off that rust bucked I scrapped earlier! I'd keep an eye out for the 323i setup, you never know man. Being unloved, a whole bunch of e21s have been scrapped over the years. Just my preference, but I always prefer to use factory bits haha. Quote Link to comment Share on other sites More sharing options...
Mr Vapour Posted July 8, 2015 Share Posted July 8, 2015 Hay man did you grab that 323 motor?? 1 Quote Link to comment Share on other sites More sharing options...
Sparkle Posted July 15, 2015 Author Share Posted July 15, 2015 NOO! bodge it up pls. Fix later. Or get all your good bits out and sell it as stock? And find another one? /Giz chrome door handles if you've got spare black. Quote Link to comment Share on other sites More sharing options...
Berjjj Posted July 15, 2015 Share Posted July 15, 2015 I can't bring myself to bodge it up! OCD spec hahaI would remove both inner and outer skins by the spot welds and weld new panels in, only way to do it right and remove any chance of the menace creeping up again!Returning to stock may be an option (with the 2.3 motor), no longer have stock springs etc anymore though. Got a bit carried away and the engine bay is essentially empty now anyway (all bagged and tagged at least!).I'll have a hunt and let you know about the door handles 1 Quote Link to comment Share on other sites More sharing options...
beachlander Posted July 15, 2015 Share Posted July 15, 2015 Bad man Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 15, 2015 Share Posted July 15, 2015 Get Bizzo to buy it then him and sparks can have cute matching 2door sedans. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.